1-Wire Gateway 10 Modbus RTU

Product information "1-Wire Gateway 10 Modbus RTU"

Whichever system you want to use, the 1-Wire Gateway 10 with Modbus TCP is ready.
If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gatway 10.

The 1-Wire Gateway 10 enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via Modbus protocol. The 1-Wire Gateway 10 represents a complete subsystem to your PLC control and manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. The 1-Wire Gateway 10 has extensive configuration and formatting options.
Up to 30 1-Wire devices can be read out in parasitic and standard mode at 1-2 second intervals. The 1-Wire Gateway 11 Modbus 10 is designed for the operation of all 1-Wire network sizes.

Application
  • Autonomous subsystem with many automatic functions
  • Independent administration of 1-Wire network
  • Modbus and standard ASCII protocol
Data interface
  • Modbus RTU (RS485) slave, 4-pole connector (serial RS485) with switchable terminating resistor 120R
  • Configuration interface USB, Mini-USB 1.1 (VSP via FT232 interface)
Number of 1-Wire and iButton devices
30 pieces
Supported Chips

DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450
and all modules from ESERA-Automation

Supply voltage 9-30VDC, 0.5A max,
Output 1-Wire Interface GND, Data, +5V max. 0.2A
Dimensions 32 x 71 x 90mm (WxHxD)
Protection type / protection class III, IP20
Assembly Designed for top hat rail
Connection Screw terminals
Scope of delivery Module (without power supply unit) and operating instructions

Unlike the 1-Wire controller  "speaks" the 1-Wire Gateway 10 ASCII text and Modbus protocol.

1-Wire Interface:
  • Advanced 1-Wire bus functions with Plug and Play feature, Auto-E-Connect system
  • Parasitic operation is supported (2-wire operation without 5V power supply)
  • max. 30 1-Wire sensors or actuators
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic library mapping: The appropriate library is mapped fully automatically for the sensor
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function
Colour: green
Connection type: Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Data interface:
  • Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND), Functional Earth (FE))
  • Modbus/RTU, Serial via USB
  • Modbus/TCP, Serial (RS485 Technology)
  • USB 2.0 Full Speed Compatible, FT232R USB UART, Virtual Com Port (VCP), Type B connector
Design / Manufacturer: ESERA
Dimensions: 2TE, 32 x 90 x 70mm (LxWxH)
Enclosure: ABS plastic with high percentage of recycled plastic, green (RAL 6020)
Execution: 1-Wire controller, intelligent system interface
Function:
  • 1-Wire Controller
  • Bus - interface, with integrated intelligence
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): IP20
Mounting: DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
Plug and Play support , Auto-E-Connect Support: Yes
Power output: 8,5W
Power supply, Supply Voltage:
  • System supply, 5VDC (1-Wire main voltage)
  • Voltage supply, wide range, universal 12VDC / 24VDC (9-30VDC)
Protection circuit:
  • ESD Schutz
  • Overvoltage protection for the voltage supply / power supply
  • Reverse polarity protection for voltage supply / power supply
Temperature range, operation: -5°C to +50°C, standard temperature range
Temperature range, storage: -5°C bis +50°C, Standard temperature range
Version: Professional Version / Professional Serie
Zustand: Neu

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials
HDR15-12 DIN rail power supply 12V 15W black
DIN rail power supply 115/230V according to 12V 15Wl Meanwell HDR series Energy-saving narrow low-power power supply unit for supplying ESERA devices, such as 1-Wire Bus Coupler Serial (TTL) 11302-T 1-Wire Bus Coupler Serial (RS232) 11302-R 1-Wire Bus Coupler Pro USB 11302-U 1-Wire bus coupler Ethernet Controller 1 Ethernet 11319 Gateway 10 and Gateway 11 ... - Space-saving and narrow DIN rail unit - Mains input voltage with wide range input - Short circuit and overload protection - Insulation class 2 (protection class 2)

From €15.21*

Product number: 61117

Available, delivery time 1-5 days, depending on the carrier

HDR15-24 DIN rail power supply 24V 15W black
DIN rail power supply 115/230V according to 24V 15Wl Meanwell HDR series Energy-saving and narrow low-power power supply unit for supplying ESERA devices. - Space-saving and narrow DIN rail unit- - Mains input voltage with wide range input - Short circuit and overload protection - Insulation class 2 (protection class 2)

From €15.21*

Product number: 61118

Available, delivery time 1-5 days, depending on the carrier

HDR60-24 DIn rail power supply unit 24V 60W black
DIN rail power supply 115/230V according to 24V 60 W 2.5AW Meanwell HDR series Energy-saving narrow low-power power supply unit for supplying ESERA devices, such as 1-Wire Bus Coupler Serial (TTL) 11302-T 1-Wire Bus Coupler Serial (RS232) 11302-R 1-Wire Bus Coupler Pro USB 11302-U 1-Wire bus coupler Ethernet Controller 1 Ethernet 11319 Gateway 10 and Gateway 11 ... - Space-saving and narrow top hat rail power supply - Mains Input voltage with wide range input - Short circuit and overload protection - Insulation class 2 (protection class 2)

From €25.11*

Product number: 61122

Available, delivery time 1-5 days, depending on the carrier

Power supply 12VDC 1A
Switching power supply 12V 1A, plug-in power supply AC/DC HNP12-120 Energy-saving plug-in power supply unit for supplying electronic assemblies - Power supply with European plug - wide range input 100-240VAC - short circuit and overload protection - insulation class 2 (protection class 2)- complies with Energy Star Level IVManufacturer: HN-PowerModel: HNP12Connection: Input: Euro plug, Output: Hollow plug Input: 100-- 240VAC, Output: 12V, 1A. 12W Output plug: 2.1 x 5.5 x 10 mm,inside positive, outside negative Connection: 1,5m Operating temperature: -5...+40°CEfficiency: 70%.

From €8.91*

Product number: 61051

Available, delivery time 1-5 days, depending on the carrier

Tip
MSP 105 1-Wire Multisensor Pro Air Humidity and Temperature Sensor
Elegant multisensor for humidity and temperature Pro for 1-Wire bus systemfor professional applications, e.g. public institutions, authorities, machines etc. Highlights Professional Temperature and humidity sensor for private, schools, public buildings and companiesFull support for ESERA Plug and Play system (Auto-E-Connect)Universal surface mountingElegant and high quality sensor housingSimple power supply (5VDC) Function: With the MSP105 1-Wire Multisensor Pro for temperature and humidity, simple monitoring of the room climate is possible. The MSP105 has an attractive sensor housing (surface mounting). With the help of the air humidity sensor, the humidity conditions in the environment are monitored and a warning could be issued via the evaluation software about possible dangers due to mold growth. The MSP105 Multisensor Pro is an important sensor for heating and ventilation systems and is a main component of a single room control. In combination with 1-Wire switching modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated. Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with article number 11134.

From €59.31*

Product number: 11150

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Available, delivery time 1-5 days, depending on the carrier

Tip
ECO 10 1-Wire Controller, intelligent system interface
ECO 10, 3rd generation 1-Wire controller, the intelligent system interface to all smart home controllers The ECO 10 1-Wire Controller represents a high performance 3rd generation 1-Wire interface for sensors and actuators. Key Features Fully automatic integration of sensors* and actuators* Auto-E-Connect Support Level I and II 1-Wire controller for autonomous communication and updating of the 1-Wire network. Fast readout of all up to 30 1-Wire sensors, actuators or chips in 1-3 second cycles Cyclic output of the processed 1-Wire data in 10 second intervals and in plain text Data communication via socket server/client, TCP or UDP Designed for small to large 1-Wire networks Power supply of the 1-Wire network with 5V voltage Top-hat rail housing for control cabinet installation Wide supply voltage range 9-30VDC Management of all ESERA sensors and actuators with suitable libraries and many standard 1-Wire modules and chips Extensive software for commissioning, configuration and analysis Whatever system you want to use, the ECO 10, the intelligent system interface, is ready for it. Do you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, FHEM, ..., no problem. All systems can access 1-Wire sensors and actuators via the ECO 10 1-Wire controller. The ECO 10 allows the automatic integration of all 1-Wire sensors* with Auto-E-Connect to all controllers such as PLC or PC systems without having special knowledge about the 1-Wire protocol. /* Style Definitions */ table.MsoNormalTable {mso-style-name: "NormalTable"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family: "Times New Roman",serif;}

From €175.41*

Product number: 11601-24

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €284.31*

Product number: 11604-24

Available, delivery time 1-5 days, depending on the carrier

Controller 1, 1-Wire to Serial RS232
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smarthome controllers The 1-Wire Controller 1 enables the connection of inexpensive 1-Wire sensors/modules with all types of µcontrollers, PLC or PC systems without special knowledge of the 1-Wire protocol.1-Wire Bus to Serial RS232Controller 1 is the autonomous management of 1-Wire devices in a 1-Wire network, automatically detecting new 1-Wire devices and cyclically supplying the current values. The output is formatted as ASCII characters and sent via the computer interface to the higher-level control system. For example, temperature sensors provide you with the temperature in plain text. The device has extensive configuration and formatting options, which are read and operated via terminal program (e.g. HTerm or Putty). Up to 30 1-Wire devices can be operated in parasitic and standard mode. The 1-Wire interface is designed for operation with small to large 1-Wire networks. Supported chips: DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2413, DS2408, DS2423, DS2438 and DS2450 Interface: 1-Wire to Serial RS232Supply voltage: 9-30VDCOutput: 5V max.0,2A Dimensions: 32 x 71x 90mm (WxHxD) Mounting: Designed for DIN rail Connection: Screw terminalsScope of delivery: Module and operating instructions

From €125.91*

Product number: 11320

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Note: If the device is not available, we recommend the new model, the ECO 10. Here you can find the ECO 10 controller. Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €152.91*

Product number: 11319

Available, delivery time 1-5 days, depending on the carrier