1-Wire Hub III DC, central power supply

Quantity Unit price
1 to 49
€77.90*
50 to 99
€74.01*
From 100
€70.11*

Available, delivery time 1-5 days, depending on the carrier

Product number: 11322
EAN: 0098931698632
Manufacturer product ID: 11322
Product information "1-Wire Hub III DC, central power supply"

1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage.

The 1-Wire Hub III DC is the central module for building a 1-Wire network.
The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller.

The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls.

Equipment / Function:

  • Central power supply of the 1-Wire network
  • 1-Wire distribution for several bus sections
  • LED display for power and 1-Wire activity
  • Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.

Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.
1-Wire Interface:
  • Advanced 1-Wire bus functions with Plug and Play feature, Auto-E-Connect system
  • DS2450 instruction set with Plug and Play support (Auto-E-Connect Functions)
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Automatic library mapping: The appropriate library is mapped fully automatically for the sensor
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
Colour: green
Connection type: Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Data interface:
  • Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
  • Industrial 1-Wire Bus (12V, 1-Wire Data und Masse (GND))
Design / Manufacturer: ESERA
Dimensions: 4TE, 70 x 90 x 70mm (LxWxH)
Enclosure: ABS plastic with high percentage of recycled plastic, green (RAL 6020)
Function:
  • Accessories for sensors (outdoor)
  • Analog Input
  • Sensoric
Mounting: DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
Number of inputs / outputs: 1 - channel output
Power supply, Supply Voltage: Voltage supply, 24VDC (18 - 30VDC, Common for industrial applications)
Protection circuit:
  • Enhanced ESD protection with ±4kV according to IEC 61000-4
  • Reverse polarity protection for voltage supply / power supply
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Software Version / Support: without software
Version: Professional Version / Professional Serie
Versions:
  • 12V version
  • Screw terminal
  • With monitoring

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

Tip
ECO 10 1-Wire Controller, intelligent system interface
ECO 10, 3rd generation 1-Wire controller, the intelligent system interface to all smart home controllers The ECO 10 1-Wire Controller represents a high performance 3rd generation 1-Wire interface for sensors and actuators. Key Features Fully automatic integration of sensors* and actuators* Auto-E-Connect Support Level I and II 1-Wire controller for autonomous communication and updating of the 1-Wire network. Fast readout of all up to 30 1-Wire sensors, actuators or chips in 1-3 second cycles Cyclic output of the processed 1-Wire data in 10 second intervals and in plain text Data communication via socket server/client, TCP or UDP Designed for small to large 1-Wire networks Power supply of the 1-Wire network with 5V voltage Top-hat rail housing for control cabinet installation Wide supply voltage range 9-30VDC Management of all ESERA sensors and actuators with suitable libraries and many standard 1-Wire modules and chips Extensive software for commissioning, configuration and analysis Whatever system you want to use, the ECO 10, the intelligent system interface, is ready for it. Do you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, FHEM, ..., no problem. All systems can access 1-Wire sensors and actuators via the ECO 10 1-Wire controller. The ECO 10 allows the automatic integration of all 1-Wire sensors* with Auto-E-Connect to all controllers such as PLC or PC systems without having special knowledge about the 1-Wire protocol. /* Style Definitions */ table.MsoNormalTable {mso-style-name: "NormalTable"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family: "Times New Roman",serif;}

From €175.41*

Product number: 11601-24

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Note: If the device is not available, we recommend the new model, the ECO 10. Here you can find the ECO 10 controller. Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €152.91*

Product number: 11319

Available, delivery time 1-5 days, depending on the carrier

1-Wire Term 1
Active termination for 1-Wire networks In a 1-Wire network, the 1-Wire Term 1 provides a defined termination at the end of the 1-Wire network, thus ensuring a stable and professional 1-Wire network. The 1-Wire Term 1 is therefore a basic component of every 1-Wire network. The module contains a passive and active terminating resistor and a signaling of bus activity. The active termination (1-Wire Term 1) is highly recommended to increase the maximum line length and improve the system stability of the 1-Wire network, especially for long 1-Wire lines and for a star or tree topology setup. In a 1-Wire network, up to 3 1-Wire Term 1 modules can be connected. The 1-Wire Term 1 is very compact and can be ideally installed in a flush-mounted box. Function Termination for 1-Wire networks, active Channel 1 channel Operating voltage 5VDC, max. 5mA Display 2, LED for power and 1-Wire data Miscellaneous Integrated overvoltage and reverse polarity protection Dimensions 40x40x25mm (LxWxH) Scope of delivery Module and operating instructions Integration into 1-Wire network The 1-Wire Term 1 module is mounted at the end of a 1-Wire network cable. If the 1-Wire network is star-shaped, i.e. with several 1-Wire cable sections, a 1-Wire Term 1 module should be connected to each end. You should not use more than three 1-Wire Term 1 modules in a 1-Wire network. Linear Topology The structure corresponds to the linear topology with the difference that the slaves are connected to the main line via cables with a length of more than 3m (branch, stub).   Star or tree topology The network is divided into several large strings at or near the 1-Wire bus coupler / 1-Wire controller /1-Wire hub (bus master). Sensors and actuators (e.g. switching modules) are connected at the end or along the respective string.   For more information, please refer to the operating instructions under Links/Downloads.

From €27.81*

Product number: 11355

Available, delivery time 1-5 days, depending on the carrier

Tip
ESI 400 4-fold push button interface, 4 channel switch input
With the ESI 400 4 Channel Switch Input Module, push buttons, switches or reed contacts can be (magnetic switch) can be interrogated. For example, the status of doors, windows, roof windows, fire dampers or a garage door can be recorded. A reed switch is only to be attached at a suitable place and connected to the ESI 400 module. The Status LED flashes when the status of one of the inputs has changed. Even short switching pulses, e.g. from buttons, are detected by the ESI 400 4-Channel Switch Input Module and stored until the next readout cycle.The ESI 400 module can be connected directly to switches or buttons. No external voltage is required for the switches. The ESI 400 module can be supplied with 5V - 12V operating voltage. Function 4 digital inputs for querying push-button or switch No external voltage for buttons or switches necessary Short keystrokes are also stored until the next readout cycle Digital inputs with filters for "calmed" buttons / switch queries Very small housing, intended for installation in flush boxes number of inputs 4 digital inputs for push-button or switch pulse duration at least 40ms Operating voltage Pushbutton / switch approx. 5V DC voltage with approx. 1mA current inputs are connected to the ground potential of the operating voltage (bus interface) Connection length inputs Cable length per input max. 20m Bus interface 1-Wire bus, interface with DS2408 command setThe data line operates with typ. 5V voltage Operating voltage 5 - 12V DC voltage (+/-10%) with max. 20mA current consumption Display LED display for power and status change of the inputs Connection Screw terminals 0,2 - 1,5qmm Cable cross section Dimensions 43 x 43 x 25mm (LxWxH), optimized for installation in flush boxes Protection class / IP class Protection class III, IP20 Scope of delivery Device and operating instructions in German, English Manual via download

From €49.41*

Product number: 11235

Available, delivery time 1-5 days, depending on the carrier

Related products

1-Wire distributor 2 RJ12 passive
1-Wire distributor with 6 outputs RJ12 modular connectors Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling. Connection 1-Wire Bus Input push-in terminal* and RJ45 socket (connected in parallel) Assignment bus connection 5V, 12, Data and GND (connection RJ45 and push-in terminal) Connection temperature sensors 6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND) Operating voltage 3 - 5.5VDC Operating current max. 500mA Assembly Designed for top hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 1 RJ45 passive
Passive 1-Wire distributor with 6 outputs on RJ45 modular connectors Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-wire cabling system based on network cables. This enables fast and cost-sensitive cabling. Connections 6 x RJ45 sockets with 1-Wire standard assignment 12V, 5V, Data and GND (sockets connected in parallel) Pressure connection terminal for connection to 1-wire hub or 1-wire bus coupler/1-wire controller Assembly top-hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions

From €28.71*

Product number: 11140

Available, delivery time 1-5 days, depending on the carrier