1-Wire Controller 1, intelligent system interface

Product information "1-Wire Controller 1, intelligent system interface"

1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers

Note: If the device is not available, we recommend the new model, the ECO 10. Here you can find the ECO 10 controller.

Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it.
If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1).

The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text.
The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules).
Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network.


Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment.

Data interface
1-Wire to Ethernet (TCP/IP or UDP)
Number of 1-Wire and iButton devices 30 pieces
Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450
Supply voltage 9-30VDC
Output 1-Wire Interface GND, Data, +5V max.0.2A
Dimensions 2HP, 32 x 71x 90mm (WxHxD)
Assembly Designed for top hat rail
Connection Screw terminals
Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download
1-Wire Interface:
  • Advanced 1-Wire bus functions with Plug and Play feature, Auto-E-Connect system
  • max. 30 1-Wire sensors or actuators
Colour: green
Connection type: Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Data interface:
  • Ethernet (LAN): TCP/IP, UDP
  • Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
  • Text protocol according to ASCII standard
Design / Manufacturer: ESERA
Dimensions: 2TE, 32 x 90 x 70mm (LxWxH)
Enclosure: ABS plastic with high percentage of recycled plastic, green (RAL 6020)
Execution: 1-Wire controller, intelligent system interface
Function:
  • 1-Wire Controller
  • Sensor Accessories (General)
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): IP20
Internal sensors: no sensor
Mounting: DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
Number of inputs / outputs:
  • 1 - channel output
  • 1-Wire Bus Interface
Plug and Play support , Auto-E-Connect Support:
  • No
  • Planned for the future
Power output: 8,5W
Power supply, Supply Voltage: Voltage supply, wide range, universal 12VDC / 24VDC (9-30VDC)
Protection circuit: Reverse polarity protection for voltage supply / power supply
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Supported 1-Wire chips / 1-Wire sensors: 1-Wire Chips, Electronic keys, iButton: DS2401, DS1990, DS1963, DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450
Temperature range, operation: -5°C to +50°C, standard temperature range
Temperature range, storage: -5°C bis +50°C, Standard temperature range
Version: Professional Version / Professional Serie

2 of 2 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


Läuft bestens an IPS. Bin seh...

Läuft bestens an IPS. Bin sehr zufrieden. Super Support, hochwertige Verarbeitung, leicht zu bedienen, universell einsetzbar durch großen Spannungsbereich. Erkennt die Busteilnehmer selbständig und zuverlässig! Rundum ein sehr durchdachtes Gerät.

Läuft wunderbar via UDP Socket...

Läuft wunderbar via UDP Socket mit IP Symcon. Sehr zu empfehlen gerade wenn man Probleme hat mit den Treibern.

Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials
HDR15-12 DIN rail power supply 12V 15W black
DIN rail power supply 115/230V according to 12V 15Wl Meanwell HDR series Energy-saving narrow low-power power supply unit for supplying ESERA devices, such as 1-Wire Bus Coupler Serial (TTL) 11302-T 1-Wire Bus Coupler Serial (RS232) 11302-R 1-Wire Bus Coupler Pro USB 11302-U 1-Wire bus coupler Ethernet Controller 1 Ethernet 11319 Gateway 10 and Gateway 11 ... - Space-saving and narrow DIN rail unit - Mains input voltage with wide range input - Short circuit and overload protection - Insulation class 2 (protection class 2)

From €15.21*

Product number: 61117

Available, delivery time 1-5 days, depending on the carrier

HDR15-24 DIN rail power supply 24V 15W black
DIN rail power supply 115/230V according to 24V 15Wl Meanwell HDR series Energy-saving and narrow low-power power supply unit for supplying ESERA devices. - Space-saving and narrow DIN rail unit- - Mains input voltage with wide range input - Short circuit and overload protection - Insulation class 2 (protection class 2)

From €15.21*

Product number: 61118

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

WAGO Codesys Function expansion for 1-Wire Controller 1
Introductory price!Function extension of the 1-Wire Controller 1 for WAGO / Codesys (1-Wire Controller 2 currently not supported) With this function extension, you can establish a direct connection between a 1-Wire Controller 1 Ethernet and, for example, a WAGO PLC controller. The data is supplied to the Codesys environment via our software module. You can download the software module free of charge from us. In the demo version only 3 blocks / modules are released. After activating the function extension, 30 sensors or actuators are available.To activate the function key of the 1-Wire Controller, connect the Config software to the Internet and the 1-Wire controller. After receipt of payment we will activate the function key for your 1-Wire Controller 1. The function key is permanently stored in the 1-Wire Controller 1.How is this function key activated?In the following the steps in telegram style:1. please download the software package for the 1-Wire Controller 1 and install the "1-Wire Config Tool 2" 2. register within the "1-Wire Config-Tool 2" 3. mark the function key 14. we activate the function on our server after receipt of payment. 5. synchronize all function extensions and transfer the new function key to the 1-Wire Controller 1 6. Now you can use all functions of the KNX-Grot software moduleImportant: The function key you purchased is only valid for the ordered 1-Wire Controller 1 and cannot be transferred to another 1-Wire Controller 1.    

From €49.41*

Product number: 40200

Available, delivery time 1-5 days, depending on the carrier

1-Wire Hub III DC, central power supply
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage. The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller. The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function: Central power supply of the 1-Wire network 1-Wire distribution for several bus sections LED display for power and 1-Wire activity Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.

From €70.11*

Product number: 11322

Available, delivery time 1-5 days, depending on the carrier

iButton / RFID Fast Mode - Function extension for 1-Wire Controller / 1-Wire Gateway
iButton / RFID Fast Mode - Function extension for 1-Wire Controller / 1-Wire Gateway   Function: with this software function extension the 1-Wire Controller / 1-Wire Gateway queries connected / learned RFID key fobs / cards and/or iButtons extremely fast the status information of the RFID units or iButtons is then transferred to the higher-level control (software, such as IP-Symcon or FHEM) via the 1-Wire Controller / 1-Wire Gateway the "if-then" logic, e.g. when an RFID unit or iButton should trigger a function, is programmed in the software The 1-Wire controller / 1-Wire gateway does not perform any logic tasks in this function extension, i.e. no output for a door opener is triggered Applications: With this function extension you can implement a door opener function or time recording via RFID unit or iButton. You activate the function extension via the Config-Tool (configuration software of the 1-Wire controller / 1-Wire gateway). Instructions can be found in the Config-Tool in the help file  

From €29.61*

Product number: 40202

Available, delivery time 1-5 days, depending on the carrier

Door opener via iButton / RFID - Functional extension for 1-Wire Controller / 1-Wire Gateway
Door opener / Access system via iButton / RFID - Functional extension for 1-Wire Controller / 1-Wire Gateway Features: Independent access system for electric doors / door opener via iButton and RFID key (RFID via RFID to 1-Wire reader, Art. No. 11614) the 1-Wire Controller / 1-Wire Gateway takes over the control of an electric door opener when an RFID or iButton key is contacted or brought into the area of the RFID reader. Additionally, an additional feedback output for an LED display can be controlled. Internal relays of the 1-Wire Controller 2 or any 1-Wire module in the 1-Wire network can be used as control output Door open time can be set in a wide range (1 - 65000 seconds) Additional display output for feedback via LED displays Electrical devices can also be activated for a time up to 65000 seconds incl. iButton / RFID Fast Mode function extension NO superordinate software / control system is required for the door opener function max. 30 keys can be used. If further 1-Wire devices are controlled, correspondingly fewer keys Application: With this function extension for 1-Wire controller / 1-Wire gateway, a door opener function or access system can be implemented via iButton Release of electrical devices for a certain time, e.g. for TV, beamer or game consoles (child safety lock)

From €37.71*

Product number: 40203

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €284.31*

Product number: 11604-24

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Controller 1 Ethernet
ECO 120 1-Wire controller desktop device, the intelligent system interface for the desktop Whatever system you want to use, the ECO 120 - the intelligent system and programming interface for 1-Wire bus sensors and actuators is ready for it. Do you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 100). The ECO120 controller allows the integration of all 1-Wire sensors to all controllers like PLC or PC systems without special knowledge about the 1-Wire protocol. The 1-Wire Controller 100 represents the autonomous management of 1-Wire sensors and 1-Wire actuators (e.g. switching modules) of a 1-Wire network. It recognizes new 1-Wire sensors/actuators independently and cyclically supplies the tested values adapted to the sensor. The output is ready formatted as ASCII characters via the computer interface to your controller. You receive e.g. from temperature sensors the temperature in C° plain writing delivered. The device has extensive configuration and formatting possibilities, which can be read out and operated via ESERA Config-Tool 3 or via terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode in 1-2 second intervals. The 1-Wire interface is designed for operation for all sizes of a 1-Wire network.

From €170.91*

Product number: 11606-12

Available, delivery time 1-5 days, depending on the carrier

Tip
ECO 10 1-Wire Controller, intelligent system interface
ECO 10, 3rd generation 1-Wire controller, the intelligent system interface to all smart home controllers The ECO 10 1-Wire Controller represents a high performance 3rd generation 1-Wire interface for sensors and actuators. Key Features Fully automatic integration of sensors* and actuators* Auto-E-Connect Support Level I and II 1-Wire controller for autonomous communication and updating of the 1-Wire network. Fast readout of all up to 30 1-Wire sensors, actuators or chips in 1-3 second cycles Cyclic output of the processed 1-Wire data in 10 second intervals and in plain text Data communication via socket server/client, TCP or UDP Designed for small to large 1-Wire networks Power supply of the 1-Wire network with 5V voltage Top-hat rail housing for control cabinet installation Wide supply voltage range 9-30VDC Management of all ESERA sensors and actuators with suitable libraries and many standard 1-Wire modules and chips Extensive software for commissioning, configuration and analysis Whatever system you want to use, the ECO 10, the intelligent system interface, is ready for it. Do you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, FHEM, ..., no problem. All systems can access 1-Wire sensors and actuators via the ECO 10 1-Wire controller. The ECO 10 allows the automatic integration of all 1-Wire sensors* with Auto-E-Connect to all controllers such as PLC or PC systems without having special knowledge about the 1-Wire protocol. /* Style Definitions */ table.MsoNormalTable {mso-style-name: "NormalTable"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family: "Times New Roman",serif;}

From €175.41*

Product number: 11601-24

Available, delivery time 1-5 days, depending on the carrier