1-Wire Repeater V2

Quantity Unit price
1 to 49
50 to 99
From 100

Available, delivery time 1-5 days, depending on the carrier

Product number: 11318
EAN: 0098931698601
Manufacturer product ID: 11318
Product information "1-Wire Repeater V2"

Repeater V2 (signal amplifier) for 1-Wire networks

New, reinforced version!


  • The repeater is used for amplification or regeneration of data signals in 1-Wire networks.
  • By using repeaters, a 1-Wire network can be expanded and a significant increase in network stability can be achieved. Especially recommended for networks with "star structure". (More about the 1-Wire topology can be found here)
  • The repeater is simply connected in a 1-Wire cable. No software required.

It supports all types of 1-Wire masters, such as USB adapter, 1-Wire bus coupler or solution with microcontroller with 5V signal level. The
repeater is simply connected to the data, ground and 5V supply line of an existing 1-Wire network. The 12V voltage is led past the repeater.
No additional power supply or configuration is required for the repeater.

Function Signal amplifier for 1-Wire network, preferred for long label lines
input and output 5V, 1-Wire data and ground (GND)
Power supply 5VDC/approx. 15mA
Dimensions 17 x 90 x 70mm (WxHxD), intended for top hat rail housing
Connection Screw terminals
Scope of delivery Module and operating instructions
1-Wire Interface: Standard 1-Wire bus functions
Colour: green
Connection type: Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
Design / Manufacturer: ESERA
Dimensions: 1TE, 17 x 90 x 70mm (LxWxH)
Enclosure: ABS plastic with high percentage of recycled plastic, green (RAL 6020)
Execution: 3 pin connector
Function: Signal amplifier for 1-Wire network, preferred for long label runs
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP20
  • Protection class III
Internal sensors:
  • Internal backup capacitor / buffer / abblock capacitor for stable operation, important for industrial use
  • no sensor
Mounting: DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
Number of inputs / outputs:
  • 1 - channel input
  • 1 - channel output
Plug and Play support , Auto-E-Connect Support: No
Power Consumption: 0.1W, 20mA at 5V
Power supply, Supply Voltage: System supply, 5VDC (1-Wire main voltage)
Protection circuit:
  • ESD Schutz
  • Enhanced ESD protection with ±4kV according to IEC 61000-4
  • Overvoltage protection for the voltage supply / power supply
  • Reverse polarity protection for voltage supply / power supply
  • Signal line overvoltage protection (1-Wire Protector) provides protection against high voltage faults up to 28VDC
  • Signal line overvoltage protection against high voltage faults
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Software Version / Support: without software
Supported 1-Wire chips / 1-Wire sensors: Universal DS2480 interface. The interface supports the 1-Wire chips that the control software knows.
Temperature range, operation: -25°C to +70°C, Extended temperature range 1, (E1)
Temperature range, storage: -25°C bis +70°C, Extended temperature range 1, (E1)
Version: Basic Version / Basic Serie

1 of 0 reviews

Leave a review!

Share your experiences with other customers.

meine 1-wire problem mit einem...

meine 1-wire problem mit einem cuno sind mit diesem repeater behoben. kabelläne über 25m sind kein problem.

Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials


1-Wire Hub III DC, central power supply
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage. The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller. The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function: Central power supply of the 1-Wire network 1-Wire distribution for several bus sections LED display for power and 1-Wire activity Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.

From €70.11*

Product number: 11322

Available, delivery time 1-5 days, depending on the carrier

1-Wire Term 1
Active termination for 1-Wire networks In a 1-Wire network, the 1-Wire Term 1 provides a defined termination at the end of the 1-Wire network, thus ensuring a stable and professional 1-Wire network. The 1-Wire Term 1 is therefore a basic component of every 1-Wire network. The module contains a passive and active terminating resistor and a signaling of bus activity. The active termination (1-Wire Term 1) is highly recommended to increase the maximum line length and improve the system stability of the 1-Wire network, especially for long 1-Wire lines and for a star or tree topology setup. In a 1-Wire network, up to 3 1-Wire Term 1 modules can be connected. The 1-Wire Term 1 is very compact and can be ideally installed in a flush-mounted box. Function Termination for 1-Wire networks, active Channel 1 channel Operating voltage 5VDC, max. 5mA Display 2, LED for power and 1-Wire data Miscellaneous Integrated overvoltage and reverse polarity protection Dimensions 40x40x25mm (LxWxH) Scope of delivery Module and operating instructions Integration into 1-Wire network The 1-Wire Term 1 module is mounted at the end of a 1-Wire network cable. If the 1-Wire network is star-shaped, i.e. with several 1-Wire cable sections, a 1-Wire Term 1 module should be connected to each end. You should not use more than three 1-Wire Term 1 modules in a 1-Wire network. Linear Topology The structure corresponds to the linear topology with the difference that the slaves are connected to the main line via cables with a length of more than 3m (branch, stub).   Star or tree topology The network is divided into several large strings at or near the 1-Wire bus coupler / 1-Wire controller /1-Wire hub (bus master). Sensors and actuators (e.g. switching modules) are connected at the end or along the respective string.   For more information, please refer to the operating instructions under Links/Downloads.

From €27.81*

Product number: 11355

Available, delivery time 1-5 days, depending on the carrier