Electricity meter alternating current

Product information "Electricity meter alternating current"

Electronic single-phase alternating current meter

Electronic alternating current meter with analogue display for DIN top-hat rail. The electricity meter is designed for quick snap-in mounting on DIN top-hat rails and is therefore ideal for monitoring the consumed KWh in houses, apartments or individual devices in almost all installation cabinets and electrical boxes.

The S0 output pulses can be evaluated e.g. by a 1-Wire S0 counter.
Top hat rail mounting 18mm / TE (DIN 43880), screw terminal connections for conductors up to 16qmm

Voltage range Nominal 230VAC (184V to 265V), 50 - 60Hz
Measuring current range 0.02A (type) up to 32A
Display 5 digits for kilowatt hours and 2 decimal places
Accuracy class 1
Resolution S0 1000 pulses / kWh = 1 pulse / Watt
Pulse output S0 Optically decoupled, 5 - 27V and max. 27mA
Operating temperature range -20°C to +65°C
Power consumption 8VA < 0.4W
Dimensions incl. cover caps 118 x 18 x 63mm (LxWxD)
Dimensions without cover caps 91 x 18 x 63mm (LxWxD)
Scope of delivery Electricity meter

Note:
When connected, the covers over the terminals must be kept closed.
The AC meter is intended for installation in the fuse box and must be installed by a qualified electrician in accordance with the applicable regulations.

Technical changes and errors excepted.

Colour: gray
Connection type: Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Design / Manufacturer: ESERA
Dimensions: 1TE, 17 x 90 x 70mm (LxWxH)
Enclosure: ABS plastic, light gray (RAL7035)
Execution: 2 pin connector
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP20
  • Protection class III
Temperature range, operation: -5°C to +50°C, standard temperature range
Temperature range, storage: -5°C bis +50°C, Standard temperature range
Versions: 230V AC voltage

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software &amp; co.
Worth knowing Wikis, entries, tutorials
Electricity meter three-phase current
Three-phase meter with analog display for top-hat rail With this three-phase meter you can monitor and measure the electricity consumption of large consumers, a house or an apartment. The S0 output impulses can e.g. be recorded by 1-Wire S0 meters and evaluated by software. The three-phase meter is intended for installation in the fuse box on the house or apartment and must be installed by a qualified electrician in accordance with the applicable regulations. Measuring current range 3 x 10(63) A Voltage range 3 x 230 / 400 VAC, 50 / 60Hz Display Analogue 6+1 (=999999.9 kWh), counter reading is maintained even when no current is applied Design Meter according to IEC62051-11 2003, IEC62053-21 2003 Accuracy class 1 Power consumption >= 10VA (2W) Pulse output S0 Optically decoupled, 5 - 27V and max. 27mA Resolution 800 pulses / kWh = 1 pulse / Watt S0 connection cable max. 20m Display LED LED flashes red when power consumption Operating temperature range -20°C to +45°C Assembly Top hat rail mounting 122mm / TE (DIN 43880) Dimensions incl. cover caps 7 TE, 118 x 122 x 63mm (LxWxD) Dimensions without cover caps 91 x 122 x 63mm (LxWxD) Connection Screw terminals for wires up to 16mm² Scope of delivery Electricity meter and data sheet When connected, the covers over the terminals must be kept closed! Technical changes and errors excepted.

From €63.81*

Product number: 96002

Finder 32A Alternating current meter MID
Electronic single-phase alternating current meter MIDFinder 32A alternating current meter MID (7E.13.8.230.00x0) Electronic active current meter from the manufacturer Finder with calibration (MID) with analogue display for 35mm DIN top-hat rail. The electricity meter is designed for quick snap-in mounting on DIN top-hat rails and is therefore ideal for monitoring the consumed electricity in houses, apartments or individual devices in almost all installation cabinets and electrical boxes. Electricity meters according to EN 62053-21 and EN 50470Type approval by PTB (7E.13, 7E.16) (Physikalisch - Technische Bundesanstalt)High resistance to magnetic and mechanical manipulation With SO interface according to DIN 43864 for connection to central tariff devices and for energy management With backstop Sealable with cap as accessory The S0 output pulses can be evaluated e.g. by a 1-Wire S0 counter. The AC meter is intended for installation in the fuse box and must be installed by a qualified electrician in accordance with the applicable regulations. Top hat rail mounting 18mm / TE (DIN 43880), screw terminal connections for conductors up to 16qmm Display: 6 digits for kilowatt hours and 1 decimal placeVoltage range: nominal 230VAC (184V to 265V) Measuring current range: 0,02A (typ) to 32A Limit current LED Display:  2000 Impulse /KW/h Resolution S0: 1000 pulses / KWh = 1 pulse / Watt Pulse output S0: max. 27V and max. 27mA Operating frequency range: 40Hz to 60Hz Operating temperature range: -20°C to + 65°C Dimensions incl. cover caps: 118 x18 x 63mm (LxWxD) Dimensions without cover caps: 91 x 18 x 63mm (LxWxD)Technical changes and errors excepted.

From €69.21*

Product number: 96010

Electricity meter three-phase current
Three-phase meter with analog display for top-hat rail With this three-phase meter you can monitor and measure the electricity consumption of large consumers, a house or an apartment. The S0 output impulses can e.g. be recorded by 1-Wire S0 meters and evaluated by software. The three-phase meter is intended for installation in the fuse box on the house or apartment and must be installed by a qualified electrician in accordance with the applicable regulations. Measuring current range 3 x 10(63) A Voltage range 3 x 230 / 400 VAC, 50 / 60Hz Display Analogue 6+1 (=999999.9 kWh), counter reading is maintained even when no current is applied Design Meter according to IEC62051-11 2003, IEC62053-21 2003 Accuracy class 1 Power consumption >= 10VA (2W) Pulse output S0 Optically decoupled, 5 - 27V and max. 27mA Resolution 800 pulses / kWh = 1 pulse / Watt S0 connection cable max. 20m Display LED LED flashes red when power consumption Operating temperature range -20°C to +45°C Assembly Top hat rail mounting 122mm / TE (DIN 43880) Dimensions incl. cover caps 7 TE, 118 x 122 x 63mm (LxWxD) Dimensions without cover caps 91 x 122 x 63mm (LxWxD) Connection Screw terminals for wires up to 16mm² Scope of delivery Electricity meter and data sheet When connected, the covers over the terminals must be kept closed! Technical changes and errors excepted.

From €63.81*

Product number: 96002