1-Wire Adapter / 1-Wire Verteiler für Kabelsensoren

With our 1-Wire Adapters and 1-Wire Distributors a fast and cost-sensitive cabling of the 1-Wire cable sensors is possible.

You can find matching 1-Wire cable sensors here:

1-Wire Temperature sensors in cable form for measurements outdoors, on surfaces or in water (cable sensors)

1-Wire Temperature sensors in housings for indoor and outdoor applications can be found here:

1-Wire Temperature sensors in housings for indoor and outdoor use (wall sensors)

Shipping until

1-Wire Adapter 1, RJ12 to Push In Terminal Adapter

Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €8.91*

Product number: 11118

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire Adapter 2, RJ45 to screw terminal

The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors. The adapter has a RJ45 connector on one side and a Push In terminal for ground, 5V, 12V and 1-Wire data on the other side. It is no longer necessary to remove the existing network connectors. The pin assignment of the RJ45 socket is matched to our 1-Wire Hub RJ45.

From €8.01*

Product number: 11124

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire distributor 1 RJ45 passive

Passive 1-Wire distributor with 6 outputs on RJ45 modular connectors Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-wire cabling system based on network cables. This enables fast and cost-sensitive cabling. Connections 6 x RJ45 sockets with 1-Wire standard assignment 12V, 5V, Data and GND (sockets connected in parallel) Pressure connection terminal for connection to 1-wire hub or 1-wire bus coupler/1-wire controller Assembly top-hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions

From €28.71*

Product number: 11140

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire distributor 2 RJ12 passive

1-Wire distributor with 6 outputs RJ12 modular connectors Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling. Connection 1-Wire Bus Input push-in terminal* and RJ45 socket (connected in parallel) Assignment bus connection 5V, 12, Data and GND (connection RJ45 and push-in terminal) Connection temperature sensors 6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND) Operating voltage 3 - 5.5VDC Operating current max. 500mA Assembly Designed for top hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire distributor 4 Linear cabling with Push In terminals

1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire distributor 4 star wiring with Push In terminals

1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire distributor LIN 6 with grounding system

1-Wire distributor LIN 6 for cabling of 1-Wire sensors in linear topology with EMC system or shielding.6 inputs / outputs on push-in connectors plus ground connection / functional grounding.Distribution module for easy cabling in linear bus topology of 1-Wire sensors in industrial and data center environment. Designed for cabling CAT5, CAT6 cables or system cables with 5 Aden plus shield. This allows a fast and cost sensitive cabling. Due to the use of Push In clamps you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can quickly and easily connect several 1-Wire distributors 6 LIN with each other linearly via system cable.The distributor complements the existing 1-Wire cabling system based on ESERA system cables.*Push In connectors are screwless clamp connections.

From €38.69*

Product number: 11164

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

1-Wire Distributor, Star Topology/Cabling with Push-In Connector, 1-Wire Extender 7

1-Wire distributor for cabling of 1-Wire sensors and actuators in STAR/star or tree topology, with functional groundingy 6 outputs with push-in connector 1 input with push-in connectorPlug and Play distribution module for easy cabling in STAR topology / star bus cabling of 1-Wire sensors and actuators. Designed for cabling with CAT5, CAT6, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost-sensitive cabling. By using push-in connectors you do not need a screwdriver for mounting. Also the times of loosening screws are over with it. Multiple 1-Wire Extender 7 distributors can be combined to extend the 1-Wire network. *Push-In connectors are screwless clamp connectors.

From €38.69*

Product number: 11166

Instantly available

Shipping until , if you place your order within the next .

Details

in production

Cable tie steel 152mm

Lock: Ball-shaped closure Design: Stainless steel type 304, material thickness 0.3 mm Dimensions: 152 x 4,5 mm Temperature range: -80°C - +500°C Packaging quantity: 5 pieces

From €2.26*

Product number: 42624

Currently not available, please sign up to get notified

Details

Shipping until

Thermocouple plug yellow type-K

Coupler yellow for thermocouple type-K Connector (female) for thermocouple type K, yellow 2-poleStrain reliefconnection up to 0,5qmm cable cross section

From €2.61*

Product number: 42766-F

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

Thermocouple plug yellow type-K

Connector yellow for thermocouple type K Connector for thermocouple type K, yellow 2-poleStrain reliefconnection up to 0,5qmm cable cross section

From €2.61*

Product number: 42766-M

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

Thermocouple type-K straight, probe 50mm, 3m, -100°C to 1100°C

Type K - Nickel-Chromium / Nickel-Aluminum, IEC 60584-1 Type K thermocouple, commonly referred to as nickel-chromium-nickel.Connection cable 2mStraight probe, length 50mmConnection cable withkink protectionGlass fiber cable insulationMeasuring range -100°C to 1100°CTerminals or open cable ends

From €15.21*

Product number: 20018

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

Thermocouple type-K, "button probe", 1m -100°C to 800°C

Type K - Nickel-Chromium / Nickel-Aluminum, IEC 60584-1 Type K thermocouple, commonly referred to as nickel-chromium-nickel.Connection cable 1m"Button probe" with M6 threadGlass fiber cable insulationMeasuring range -100°C to 800°C

From €17.01*

Product number: 20016

Instantly available

Shipping until , if you place your order within the next .

Details

Shipping until

Thermoelement Typ-K, Sonde gebogen 3m -100°C bis 1100°C

Thermoelement Typ K, gebogen, Nickel-Chrom-Nickel, -100°C bis 1100°C, 3m Thermoelement Typ K, allgemein als Nickel-Chrom-Nickel bezeichnet.Anschlusskabel 3mGebogene SondeGlasfaser KabelisolationMessbereich -100°C bis 1100°C

From €17.01*

Product number: 20019

Instantly available

Shipping until , if you place your order within the next .

Details