1-Wire 8-Fach Schaltmodul, Leiterplatte ohne Bauteile Unbestückte Leiterplatte zum Aufbau eines 1-Wire 8-Fach Schaltmoduls. Mit dem 1-Wire 8-Fach Schaltmodul können 8 Gleich- oder Wechselspannungsverbraucher geschaltet werden. Das Gerät ist in zwei Gruppen zu je 4 Kanälen aufgebaut. Jede Gruppe hat einen getrennten Stromeingang, der mit  je 5A abgesichert ist. Anzahl Kanäle 8 Schaltstrom 5A pro Ausgang, maximal 5A pro 4-Fachgruppe Schaltspannung Gleich- oder Wechselspannung bis 230V Einbau Für Hutschienengehäuse und Schaltschrankeinbau vorgesehen Anschluß Schraubklemmen für 1-Wire Bus und Schaltkontakte (bis 2,5qmm möglich) Absicherung Sicherungen innenliegend,  2 x Micro Fuse 5A/T Versorgungsspannung 5V und 12V Stromaufnahme 5V ca. 1mA, 12V ca. 100mA (alle Ausgänge aktiv) Schutzklasse II Lieferumfang Unbestückte Platine in Industriequalität ohne Bauteile oder Gehäuse. Bauanleitung per Download Hinweis: Auf der Platine müssen SMD-Bauteile gelötet werden.

1-Wire 8-fold switch module display board Unassembled printed circuit board (display board) for the assembly of an 8-fold switching module Display board for mounting the 1-Wire 8-fold switch module Installation: Designedfor DIN rail housing Dimensions: 65 x 55mm (WxH) Scope of delivery: Unassembled industrial quality board without components or housing. Building instructions per download Further information, like program examples, data sheets or drivers can be found in our download area

1-Wire 3-fold analog input, 0- 5V or 0 - 10V(Unassembled printed circuit board for the construction of a 1-Wire 3-fold analog input) With the 1-Wire analog input module, three DC voltage sources can be measured independently of each other. As an example, pressure sensors, brightness sensors or other transducers can be read in. The inputs are not isolated from the 1-wire bus and have a ground potential. The module is only intended for the connection of isolated DC voltage sources.The measuring inputs have reverse polarity protection, overvoltage protection and input filters. The measuring range (0-5VDC or 0-10VDC) can be switched by software. number of channels 3 Measuring input 0-5VDC or 0-10VDC Input resistance Input resistance 200k Supply voltage 5V and 12V Power consumption approx. 15mA (all inputs active) Connection Screw terminals for 1-Wire bus and input voltage Isolation No isolation between input and 1-Wire bus Installation Designed for installation in DIN rail housing and control cabinet installation 1-Wire device DS2450(4-fold analog input) Protection class III Scope of delivery Unassembled board in industrial quality without components or housing. Building instructions per download Note: SMD components must be soldered on the board.  

1-Wire Dual Digital Input, Board Unassembled printed circuit board for the construction of a 1-Wire digital input. With the 1-Wire dual digital input module two inputs can be monitored independently of each other. A pump or lamp can be monitored as an example. The inputs are connected in parallel to the consumer to be monitored. The dual input module is designed for three variants:- 230V AC voltage - 24V DC voltage - 5V DC voltageConnection: screw terminals for 1-wire bus and input voltageSupply voltage: 1-Wire bus with 5V and 12VCurrent consumption: 5V approx.1mA, 12V approx. 5mA (both inputs active)Installation: Designed for control cabinet installation (top hat rail)Protection class:  IIAssessories: Top hat rail housing (HUT 2)Scope of delivery: Unassembled board in industrial quality without components or housing. Building instructions per downloadNote: Small SMD components must be soldered on the board.

1-Wire Dual Reed contact module, board Unassembled printed circuit board for the assembly of a 1-Wire dual reed contact module.With the 1-Wire Dual Reed Contact Sensor Module two independent reed contacts (magnetic switches) can be monitored.The sensor can be used, for example, to monitor a window, door or garage door. 1-Wire interface DS2413 Dual I/O Dimensions 85,8x30,5mm Connection Screw terminals for 1-Wire bus and input voltage (up to 2.5qmm possible) Supply voltage 1-Wire Bus with 5V and 12V Power consumption 5V approx. 1mA, 12V approx. 5mA (both inputs active) Isolation Inputs electrically connected with 1-Wire bus Installation intended for top hat rail housing (switch cabinet installation) Scope of delivery Unassembled board in industrial quality without components or housing.Building instructions per download Cable length between sensor and module It is recommended to use max. 10m cable length. Labelling CE Protection class III Note: SMD components must be soldered on the board

1-Wire switching module Dual 230V 5A top hat rail mounting, board Unassembled printed circuit board for the assembly of a 1-Wire dual switch module.With the Dual Switching Module, two direct current or alternating current consumers can be switched independently of each other. By interconnecting the two channels it is possible to control awnings or tubular motors (roller shutters) (mech. relay version). The module is available in two versions. 1-Wire switch module Dual mech. relay By 5A - Change-over relay for switching AC or DC consumers, all contacts of the relay are led outside- - control of tubular motors for awnings or roller shutters possible 1-Wire Switch Module Dual Electronic Load Relay, Solid State Relay 5A Electronic load relays are the modern way to switch 230V consumers. The switching process is carried out by electronic switches, so there are no malfunctions and no wear and tear of switching contacts as with mechanical relay devices.- Gentle switching of AC 230V consumers - Increased service life of lamps due to zero-crossing control- Practically wear-free Switching current 5A for mech. relay and electronic relay Installation The 1-Wire Dual switch module is designed for control cabinet installation (top-hat rail). Power consumption 5V approx. 1mA, 12V (both outputs active) approx. 30mA Supply voltage 1-Wire Bus, 5V and 12V Connection Screw terminals Protection class II Accessories DS2413 Dual I/O module, top hat rail housing (HUT 2), Elect. Load relays Scope of delivery Unassembled board in industrial quality without components or housing. Building instructions per downloadNote:SMD components must be soldered on the board.

1-Wire Hub II AC with integrated power supply unit unpopulated printed circuit board for the construction of a 1-Wire Hub II AC. The 1-Wire Hub II AC is the central module for building a 1-Wire network. Combination with all 1-Wire devices possible. Designed for control cabinet installation (top hat rail mounting). Via the 1-Wire hub the 1-Wire bus is supplied with 5V and 12V voltage. If the output power of the 1-Wire hub is not sufficient, additional power can be supplied by an external power supply (15V - 24V). Options:- Voltage monitoring of the 5V and 12V voltages by 1-Wire - Voltage and current monitoring of the 5V and 12V by 1-Wire Supply voltage 230VAC Output 5V 0.1A, 12V 0.2A (sum of 5V and 12V 4.5W) LED indicator 5V voltage, 1-Wire activity Dimensions 85 x 77mm, intended for HUT4 top hat rail housing Connection Screw connection Scope of delivery Unassembled board in industrial quality without components or housing. Building instructions per download Note: SMD components must be soldered on the board, depending on the assembly option.

1-Wire Dual S0 counter, board Unassembled printed circuit board for the construction of a 1-Wire Dual Counter. Counter module is designed for energy metering of two independent electricity, water and gas meters. All S0 devices manufactured according to DIN 43864 with isolated S0 interface can be connected. The counted pulse states are maintained for several days by the internal voltage buffering and can be read out via the 1-wire BUS with a time delay. A maintenance-free GoldCap (high-performance capacitor) is integrated to buffer the meter values. Note: The counter reading cannot be reset. Accessories: IC DS2423 (counter module)Installation note: The 1-Wire Dual S0 counter is designed for panel mountingConnection: 2 S0 counter inputs via screw terminal Supply voltage: 5V 1-Wire Bus, no additional external power supply necessary!Power consumption: 5V, both LED's active 4mA Scope of delivery: Unassembled industrial quality board without components or housing. Building instructions per downloadNote: Small SMD components must be soldered on the board.

1-Wire Dual Display Board Designed for mounting two 3mm or 5mm display LEDs inside the 32mm DIN rail housing art. no. 94002. For the electrical connection to the motherboards, a post plug for ribbon cable is provided. The board is fastened in the upper part of the top-hat rail housing with two screws.The board can be combined with the following ESERA boards: 1-Wire Dual S0 Counter, Art.No. 120041-Wire Dual Switch Module, Art.No. 120011-Wire Dual Digital Input, Art.No. 120001-Wire 3-fold analog input, Art.No. 12010 1-Wire Dual Reed Contact, Art.No. 12009 Dimensions: 55 x 29 mm Design: double-sided printed circuit board, industrial design Scope of delivery: unassembled printed circuit board, without components and screws Installation: Designed for DIN rail housing Dimensions: 65 x 55mm (WxH) Scope of delivery: Unassembled industrial quality board without components or housing. Building instructions per download Further information, like program examples, data sheets or drivers can be found in our download area

1-Wire temperature, humidity and brightness living room sensor, surface mounting, unassembled board Unassembled board for the construction of a living room sensor for temperature, humidity and brightness. The circuit boards are industrially manufactured, plated through and provided with solder resist. The product photo of the assembled PCB shows only an example of a completely assembled board. Printed circuit board for Multisensor / living space sensor for accurate temperature and humidity measurement. A DS18B20 sensor is used for temperature measurement, and a high-precision Honeywell sensor is provided for humidity measurement. The light sensor has a measuring behaviour similar to the human eye and therefore reacts specifically to visible light and not to UV light as with many sensors. The light sensor is suitable for detecting sunrise/set. Scope of delivery: Unassembled board in industrial quality without components or housing. Building instructions per downloadNote: SMD components must be assembled on the board. 1-Wire components DS18B20, temperatureDS2438 Multisensor for air humidity Temperature sensor DS18B20 Accuracy 0.5° in the range of -10°C - 85°C Resolution 9-12 bits, 0.5°C-0.0625°C/bit, depending on the selected resolution Air humidity sensor Capacitive sensor (Honeywell HIH4000 series) Accuracy 3-8% in the range of 5-95% relative humidity (non-condensing) Repeatability 0,5% brightness sensor Sensor adapted to the sensitivity of the human eye Measuring range 2 - 7000 lux Resolution 9 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 V= (+/-10%) Power consumption max.2mA Connection: RJ45 modular socket and Push In terminal Dimensions Printed circuit board: 67 x 67mm (LxWxH)Installed in sensor housing: 71 x 71 x 32mm (LxWxH)