HDR30-24 top hat rail power supply unit 24V 30W black

Quantity Unit price
1 to 49
€21.90*
50 to 99
€20.81*
From 100
€19.71*

Currently not available, please sign up to get notified

Product number: 61120
EAN: 0098931699936
Manufacturer product ID: HDR30-24
Product information "HDR30-24 top hat rail power supply unit 24V 30W black"

DIN rail power supply 115/230V according to 24V 30W 1.5AW

Meanwell HDR series

Energy-saving narrow low-power power supply unit for supplying ESERA devices.

- Space-saving and narrow top hat rail power supply
- Mains Input voltage with wide range input
- Short circuit and overload protection
- Insulation class 2 (protection class 2)

Colour: black
Connection type: Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Design / Manufacturer: Meanwell
Dimensions: 2TE, 35 x 90 x 58,5mm (BxWxH)
Enclosure: ABS plastic, black (RAL7035)
Function: Stromversorgung, Netzteil
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP20
  • Protection class II
Mounting: DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
Number of inputs / outputs:
  • 1 - channel input
  • 1 - channel output
Power output: 30W
Power supply, Supply Voltage: Supply voltage, wide range for mains voltage, 85VAC to 264VAC, 120VDC to 370VDC
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -30°C to +70°C, Extended temperature range

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

eBUS Coupler Ethernet
eBus coupler USB: eBus to USB data interface for PC, Raspberry Pi and Co Application With the eBus coupler you can access the eBUS e.g. of your heating system in read and write mode. With appropriate software, you can evaluate data from your heating system and send new values to your heating control system via the eBUS. Features With the eBus coupler you can access the eBUS e.g. of your heating system in read and write mode. With appropriate software, you can evaluate data from your heating system and send new values to your heating control system via the eBUS. The eBus coupler is equipped with a galvanic isolation between eBus and PC interface. The eBus input is bipolar, so you do not need to pay attention to the polarity of the eBus when connecting. The housing of the eBus coupler is designed for control cabinet installation. As data interface to your PC, the eBus coupler is equipped with an Ethernet interface. Drivers for Windows operating systems are available.The eBus coupler is not supported by Vaillant vrDIALOG software. A very good example (VWMon by Alexey Ozerov) for reading out eBus data can be found here or the project Fhem here

From €127.71*

Product number: 12002

Currently not available, please sign up to get notified

1-Wire Bus Coupler USB Pro, isolated
1-Wire Bus Coupler Pro with USB interface, isolation and external power supply With the professional 1-Wire Bus Coupler USB V3 a stable and electrically isolated connection of the 1-Wire network and a PC, mini computer (e.g. Raspberry Pi) or to many other controllers is established. The 1-Wire Bus Coupler USB is compatible with the serial version of Maxim, DS9097 and DS9097E, and works with a standard DS2480 1-Wire master device. By using the 1-Wire standard interface module (DS2480), the 1-Wire bus copller is compatible with all controllers that support this module. These are for example IP-Symcon, FHEM, OpenHub and many more. A special highlight of the 1-Wire Bus Coupler USB V3 is the external power supply. This significantly increases the operational reliability of the data connection to the computer and prevents problems caused by unreliable USB power supplies. The use of more expensive USB hubs is no longer necessary.For the 1-Wire network the 5V output voltage is provided. The insulation prevents interference from and to the PC and reduces possible "electrosmog" in the house. The insulation also increases electrical safety.Individual 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended. Data interface USB 1.1, with FTDI FT232RL Chip (Virtual COM Port) Compatibility To DS9097U 1-Wire Adapter SerialApplicable for many software, such as OWFS, IP-Symcon, FHEM, which is intended for the DS9097U (DS2480 device) Drivers for different operating systems in the download area of this article. Display LED Power and data 1-Wire device DS2480R+ Power supply 9-32 VDC max. 500mA (power supply unit see accessories) Control Control by all devices and controllers that support the DS2480 (serial master) Dimensions 85 x 32 x 70mm Protection circuit Reverse polarity protection for 1-Wire output and supply voltage Isolation Between 1-Wire bus and PC interface min. 500VDC Scope of delivery Finished device and operating instructions

From €89.91*

Product number: 11302-U

Currently not available, please sign up to get notified

Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Note: If the device is not available, we recommend the new model, the ECO 10. Here you can find the ECO 10 controller. Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €152.91*

Product number: 11319

Currently not available, please sign up to get notified

Rain sensor
Versions: 12V version
  Rain sensor with heater and professional, functionally reliable measuring principle (12V)The large sensor surface reacts to rain or snow. The switching polarity and sensitivity are adjustable. The switchable heating prevents icing or condensation and accelerates drying. In the most sensitive setting, the device is also suitable for detecting fog. The mast or wall mounting bracket, available as an accessory, enables easy installation. Typical areas of application are in garden centres, in agriculture, in building control systems, but also in the home and garden. The rain sensor works on the basis of an alternating current measuring system (electrolytic measuring principle). The advantage is that no sensor electrode can degrade and therefore has a significantly higher life expectancy compared to other sensors with direct current measuring principle (as almost 80% of all devices on the market). The potential-free relay contact closes when rain starts. The relay contact can transmit any voltage, e.g. 12V or 24V, to the evaluation electronics, e.g. an ESERA 1-Wire Digital Input or 1-Wire Switch Input Module. Measurement procedure: Electrolytic AC voltage measurement Evaluation: - Potential-free changeover relay contact- Active in rain or dew- Contacts are isolated from the rest of the electronics. Power supply: 12V or 24V AC or DC (+/-10%), depending on version Power consumption: approx. 60mA (with heating 80 - 300mA) Relay contact: max. 30V / 4A Dimensions: 80 x 82 x 58mm Scope of delivery: Device with instructions, without evaluation electronics, without mounting bracket

From €69.21*

Product number: 20002

Currently not available, please sign up to get notified

1-Wire bus coupler with RS232 (V24 interface), industrial version, galvanic isolation, DS2480
DIN rail adapter between PC and 1-Wire network, Serial to 1-WireIndustrial 1-Wire bus coupler with RS232 (V24) in industrial design with galvanic isolation between the data and 1-Wire bus interface.1-Wire bus coupler RS232 in DIN rail housing. With the 1-Wire Bus Coupler a fast and simple connection between computer and 1-Wire network or to the PLC via a serial terminal is possible.State-of-the-art high-speed optocouplers and DC/DC power supplies are used for safe galvanic isolation. Even the 1-Wire activity LED has an isolated design. The isolation prevents interference to and from the PC and reduces possible "electrosmog" in the building. The isolation also increases electrical safety.For the 1-Wire network, the 5V output voltage is 250mA max.Single 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended.LED indicators for power and activity.

From €89.91*

Product number: 11302-R

Currently not available, please sign up to get notified

1-Wire bus coupler with RS232 (TTL 5V), industrial version, galvanic isolation
DIN rail adapter between PC and 1-Wire networkIndustrial 1-Wire bus coupler with RS232 (TTL 5V standard) in industrial design with galvanic isolation between the data and 1-Wire bus interface.1-Wire bus coupler RS232 in DIN rail housing. With the 1-Wire Bus Coupler a fast and easy connection between computer and 1-Wire network or to the PLC via a serial terminal is possible.State-of-the-art high-speed optocouplers and DC/DC power supplies are used for safe galvanic isolation. Even the 1-Wire activity LED has an isolated design. The isolation prevents interference to and from the PC and reduces possible "electrosmog" in the building. The isolation also increases electrical safety.For the 1-Wire network, the 5V output voltage is 250mA max.Single 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended.LED indicators for power and activity.Note: The data interface is designed as a D-Sub socket.

From €89.91*

Product number: 11302-T

Currently not available, please sign up to get notified

Related products

HDR15-24 DIN rail power supply 24V 15W black
DIN rail power supply 115/230V according to 24V 15Wl Meanwell HDR series Energy-saving and narrow low-power power supply unit for supplying ESERA devices. - Space-saving and narrow DIN rail unit- - Mains input voltage with wide range input - Short circuit and overload protection - Insulation class 2 (protection class 2)

From €15.21*

Product number: 61118

Currently not available, please sign up to get notified