Finder 32A Alternating current meter MID

Quantity Unit price
1 to 49
€76.90*
50 to 99
€73.06*
From 100
€69.21*
Product number: 96010
EAN: 0098931699028
Manufacturer product ID: 96010
Product information "Finder 32A Alternating current meter MID"

Electronic single-phase alternating current meter MID
Finder 32A alternating current meter MID (7E.13.8.230.00x0)

Electronic active current meter from the manufacturer Finder with calibration (MID) with analogue display for 35mm DIN top-hat rail. The electricity meter is designed for quick snap-in mounting on DIN top-hat rails and is therefore ideal for monitoring the consumed electricity in houses, apartments or individual devices in almost all installation cabinets and electrical boxes.

Electricity meters according to EN 62053-21 and EN 50470
Type approval by PTB (7E.13, 7E.16) (Physikalisch - Technische Bundesanstalt)
High resistance to magnetic and mechanical manipulation
With SO interface according to DIN 43864 for connection to central tariff devices and for energy management
With backstop
Sealable with cap as accessory


The S0 output pulses can be evaluated e.g. by a 1-Wire S0 counter.

The AC meter is intended for installation in the fuse box and must be installed by a qualified electrician in accordance with the applicable regulations.

Top hat rail mounting 18mm / TE (DIN 43880), screw terminal connections for conductors up to 16qmm


Display: 6 digits for kilowatt hours and 1 decimal place
Voltage range: nominal 230VAC (184V to 265V)
Measuring current range: 0,02A (typ) to 32A Limit current

LED Display:  2000 Impulse /KW/h
Resolution S0: 1000 pulses / KWh = 1 pulse / Watt 
Pulse output S0: max. 27V and max. 27mA
Operating frequency range: 40Hz to 60Hz
Operating temperature range: -20°C to + 65°C
Dimensions incl. cover caps: 118 x18 x 63mm (LxWxD) 
Dimensions without cover caps: 91 x 18 x 63mm (LxWxD)

Technical changes and errors excepted.

Accuracy class: 1
Colour: gray
Dimensions:
  • 91 x 18 x 63mm (LxWxD), without cover caps
  • 118 x 18 x 63mm (LxWxD), incl. cover caps
Display: 5 digits for kilowatt hours and 2 decimal places (counter reading is retained even when no power is supplied)
Display LED: LED flashes red on power consumption
Enclosure: ABS plastic, light gray (RAL7035)
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): IP20
Measuring current range: 0.02A (typ) to 50A Limit current
Mounting: DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
Number of inputs / outputs:
  • 1 - channel input
  • 1 - channel output
Operating frequency range: 40Hz bis 60Hz
Power Consumption: 8VA < 0.4W
Pulse output S0: Passively optically decoupled, max. 27V and max. 27mA
Resolution: 1000 pulses / kWh = 1 pulse / watt
Scope of delivery: Device and user manual
Temperature range, operation: -20°C to +65°C, Extended temperature range
Voltage range: Nominal 230VAC (184V bis 265V)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software &amp; co.
Worth knowing Wikis, entries, tutorials

Accessories

Tip
1-Wire Dual S0 counter module PRO
The 1-Wire S0 Meter Pro is designed for energy metering of two independent electricity, water and gas meters or the wind turbine. All S0 energy meters manufactured according to DIN 43864 can be reliably measured. Due to the high-quality electronics of the 1-Wire S0 Meter Pro, energy meters can also be reliably recorded with very high pulse frequencies of up to 300 Hz. The S0 meter values are made available via a 1-Wire bus interface. In the event of a power failure, the S0 meter values are permanently stored internally for at least 99 years. Inputs 2 x S0 pulse input (counter) for 2 energy meters or wind sensor Supply voltage 12V 1-Wire Bus Power consumption 10mA, both inputs active S0 Interface 10V and approx. 4mA working level, according to DIN 43864 Counter range / scope 32 bit counter per S0 input Data preservation / storage Permanent storage of meter values for up to 99 years in the event of a power failure Data interface 1-Wire Interface, DS2423 command set (GND, Data and 12V) Operating voltage 12VDC (+10% / -20%) Power consumption max. 10mA Operating frequency S0 Input max. 300Hz Connection Screw terminals for 1-Wire bus and S0 inputs up to 2,5qmm cable cross section Dimensions 1HP, 17 x 71x 90mm (WxHxD) Protection class III Note The counter value can be reset via push button on the front panel Installation Designed for control cabinet installation (top hat rail) Scope of delivery Finished device and operating instructions

From €59.31*

Product number: 11211

Related products

Electricity meter alternating current
Electronic single-phase alternating current meter Electronic alternating current meter with analogue display for DIN top-hat rail. The electricity meter is designed for quick snap-in mounting on DIN top-hat rails and is therefore ideal for monitoring the consumed KWh in houses, apartments or individual devices in almost all installation cabinets and electrical boxes. The S0 output pulses can be evaluated e.g. by a 1-Wire S0 counter.Top hat rail mounting 18mm / TE (DIN 43880), screw terminal connections for conductors up to 16qmm Voltage range Nominal 230VAC (184V to 265V), 50 - 60Hz Measuring current range 0.02A (type) up to 32A Display 5 digits for kilowatt hours and 2 decimal places Accuracy class 1 Resolution S0 1000 pulses / kWh = 1 pulse / Watt Pulse output S0 Optically decoupled, 5 - 27V and max. 27mA Operating temperature range -20°C to +65°C Power consumption 8VA < 0.4W Dimensions incl. cover caps 118 x 18 x 63mm (LxWxD) Dimensions without cover caps 91 x 18 x 63mm (LxWxD) Scope of delivery Electricity meter Note:When connected, the covers over the terminals must be kept closed.The AC meter is intended for installation in the fuse box and must be installed by a qualified electrician in accordance with the applicable regulations.Technical changes and errors excepted.

From €23.31*

Product number: 96001