1-Wire temperature sensor, open cable ends, industrial, pro, waterproof, silicone cable

Quantity Unit price
1 to 49
€13.90*
50 to 99
€13.21*
From 100
€12.51*

Available, delivery time 1-5 days, depending on the carrier

Length
Product number: 11104-1-OK
EAN: 0098931699967
Manufacturer product ID: 11104-1-OK
Product information "1-Wire temperature sensor, open cable ends, industrial, pro, waterproof, silicone cable"

1-Wire temperature sensor / contact sensor Pro Waterproof, robust connection cable and open cable ends. Unshielded cable

Features:

  • Available in the cable lengths 1m, 2m and 5m
  • Professional high quality 1-Wire temperature sensor with stainless steel sleeve oil resistant connection cable open cable ends.
  • The sensor can be operated permanently outdoors and in all environments in a temperature range from -55°C to +125°C
  • The probes are suitable for permanent use in water due to IP68 class
  • The temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. Therefore the temperature sensor is suitable for professional applications. You can find details about the topic decoupling / blocking capacitor in our eBook

Examples of use:

  • Temperature measurement of hot water tanks
  • Installation on heating pipes (e.g. flow and return temperature)
  • Temperature measurement of outdoor pools, swimming pools and ponds
  • Floor heating systems for overtemperature monitoring
  • Suitable for temperature measurement in rough and conditionally aggressive environments 

Connection:

  • To connect the temperature sensors we recommend the 1-Wire distributor art.no. 11142 or the 1-Wire adapter 2 art.no. 11124
  • The temperature sensor can be operated directly at many 1-wire interfaces, e.g. the USB adapter, the ESERA 1-wire bus coupler, 1-wire controller or 1-wire gateway
  • Operation in 2- or 3-wire technology is possible

Execution:

1-Wire temperature sensor with robust connection cable in industrial quality. Special lengths and other versions are available on request.

Version

  • Contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation
  • The sensor is permanently waterproof
  • Robust connection cable for professional applications

Tightness

IP68

Operating temperature  

-55°C to 125°C

Accuracy

±0.5° C typ. (from -10°C to +85°C), according to manufacturer's data sheet

Connection / Cable

  • Open cable ends with wire end sleeves for easy connection without previous electrical knowledge
  • shielded robust connection cable with 5mm diameter
  • Cable lengths available in 1m, 2m and 5m
  • Wire colours: white = GND, green = 1-Wire Data (DQ), brown = 3-5.5VDC (VDD)

Supply voltage   

3 - 5.5 VDC max. 1mA

Operating mode

2 or 3-wire connection (data, ground and 5V, parasitic operation possible)

Resolution

9-12 bit adjustable via software

1-Wire device

DS18B20

Protection tube

6 X 40 mm potted, Stainless steel 1.4303

1-Wire Interface:
  • DS18B20 Temperature Chip
  • Parasitic operation is supported (2-wire operation without 5V power supply)
  • Standard 1-Wire bus functions
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Classes Assignment: Output OWD sensor class via ECO controller
Colour: gray
Connection type: Open cable ends
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
Design / Manufacturer: ESERA
Dimensions: 6 X 40 mm (LxW), molded
Enclosure: Stainless steel sleeve , alloy 1.4303, cast
Execution: 3 pin connector
Function:
  • Sensoric
  • Temperature sensor
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP65
  • Protection class III
Internal sensors: Temperature measuring range -55 to + 125°C, accuracy +/- 0.5°C
Length:
  • 1m
  • 2m
  • 5m
Measurement values: Temperature, °C
Mounting:
  • Cable sensor
  • Outdoor / weather-protected area
  • Roof mounting
  • wall mount
Number of inputs / outputs: 1 - channel input
Plug and Play support , Auto-E-Connect Support: Yes
Power supply, Supply Voltage: Voltage supply 2.8VDC to 5.5VDC
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -45°C to +125°C, Extended temperature range 3, (E3)
Temperature range, storage: -55°C to +125°C, Extended temperature range 3, (E3)
Version: Professional Version / Professional Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

1-Wire Adapter 2, RJ45 to screw terminal
The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors. The adapter has a RJ45 connector on one side and a Push In terminal for ground, 5V, 12V and 1-Wire data on the other side. It is no longer necessary to remove the existing network connectors. The pin assignment of the RJ45 socket is matched to our 1-Wire Hub RJ45.

From €8.01*

Product number: 11124

Available, delivery time 1-5 days, depending on the carrier

1-Wire Adapter 1, RJ12 to Push In Terminal Adapter
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €8.91*

Product number: 11118

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Available, delivery time 1-5 days, depending on the carrier

Related products

ESERA-Station 200 Smart Home IoT
ESERA-Station 200 - expandable, open and future-proof Central control with integrated professional 1-Wire interface for Smart Building, IoT and general automation applicationsTheESERA-Station is the central control unit of your Smart Home and for Internet of Things (IoT). The ESERA station is more like another central controller. It is an open platform, is a combination of an embedded computer and professional ESERA ECO controller. It is an open automation control center built on standards.ESERA station is usable for a variety of software packages, Codesys*****, IP-Symcon, OpenHAB, FHEM, NodeRed and many more, built on a Raspberry Pi 3b.Thefollowing modules are integrated in the ESERA-Station 200:Powerful ARM Quad Core Embedded Computer, Raspberry Pi 3b New in 2021ECO 200 1-Wire controller of the latest generationwithPlug and Play system (Auto-E-Connect Support) for 1-Wire.No matter which IoT or automation system you are already using or still planning to use, you can combine them with ESERA Station 200.You can combine the following systems with ESERA Station 200: The listed systems are exemplary and depend on the installed application software and hardware extensions. Wired / Cable systems / Bus systems*** (Exemplary) Radio based / Radio systems*** (Exemplary) ESERA 1-Wire Gateway (ASCII and Modbus RTU software interface) EnOcean* KNX* (IP-Symcon, Codesys*****) HomeMatic* digitalSTROM* (IP-Symcon) XBee/Zigbee* LCN* (IP-Symcon) xComfort* DMX lighting technology** (IP-Symcon) Z-Wave* ModBus TCP/RTU**, Slave / Master (IP-Symcon, Codesys*****) Voice control from Amazon (Alexa)*, *** M-Bus* (IP-Symcon) PLC Siemens* / WAGO* / Beckhoff* (IP-Symcon, Codesys*****) PROFINET Controller / Device (Codesys*****) EtherCAT Master (Codesys*****) CANopen Master / Slave (Codesys*****) EtherNet/IP Scanner / Adapter (Codesys*****) * An additional gateway is required for operation. This is not included in the scope of delivery.** The optional RS485 interface is required for operation. The RS485 interface can be ordered together with the Station 200.*** The functions depend on the installed application software. The listed systems are related to the operation with IP-Symcon and Codesys and are to be understood as an example. The scope of functions can be found in the respective application software.**** ESERA sensors and actuators of the Pro series with Auto-E-Connect support are required.***** The offered CODESYS Runtime is intended for testing and teaching purposes. All scripts, software modules and extensions of IP-Symcon can be used. To manage and configure your smart home or smart system, the IP-Symcon management console is available for temptation. After installing the runtime environment, the Raspberry Pi can be programmed as a PLC using the CODESYS Development System.The product is installed into the Linux distribution Raspbian via the CODESYS Development System using the included CODESYS Deploy Tool extension. After each restart of the Raspberry Pi, the runtime system is automatically started.

From €392.31*

Product number: 19200-1M

Available, delivery time 1-5 days, depending on the carrier

Kabelbinder Stahl 152mm
Kabelbinder aus rostfreiem StahlIdeal geeignet um Temperatursensoren an Heizungsrohren zu fixieren. Verschluss  Kugelverschluß Ausführung  Edelstahl Typ 304, Materialstärke 0,3mm Abmessungen 152x4,5mm Temperaturbereich  -80°C - +500°C Verpackungsmenge 5 Stück    

From €2.26*

Product number: 42624

Available, delivery time 1-5 days, depending on the carrier

1-Wire Adapter 1, RJ12 to Push In Terminal Adapter
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €14.31*

Product number: 11348

Available, delivery time 1-5 days, depending on the carrier

1-Wire Adapter 1, RJ12 to Push In Terminal Adapter
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €8.91*

Product number: 11118

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 2 RJ12 passive
1-Wire distributor with 6 outputs RJ12 modular connectors Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling. Connection 1-Wire Bus Input push-in terminal* and RJ45 socket (connected in parallel) Assignment bus connection 5V, 12, Data and GND (connection RJ45 and push-in terminal) Connection temperature sensors 6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND) Operating voltage 3 - 5.5VDC Operating current max. 500mA Assembly Designed for top hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Available, delivery time 1-5 days, depending on the carrier