Temperature sensor cable LC 1-Wire 1m

Quantity Unit price
1 to 49
€8.90*
50 to 99
€8.46*
From 100
€8.01*

Available, delivery time 1-5 days, depending on the carrier

Product number: 11137
EAN: 0782321213559
Manufacturer product ID: 11137
Product information "Temperature sensor cable LC 1-Wire 1m"

Low cost 1-Wire Temperature Sensor DS18B20 in stainless steel sleeve with PVC connection cable and open cable ends.
The sensors are designed for measurement outdoors, on surfaces or in non-aggressive gases. The sensors are not waterproof.

The Temperature Sensor can be connected directly to one of our 1-Wire bus couplers, 1-Wire controllers, 1-Wire hub or to many other controllers.


Application

Contact sensor for heating systems, outdoor sensor

Connection

Open cable ends, cable length approx. 1m

Pin assignment

Red = +5V, Black = GND, Yellow = Data

Operating temperature

max. cable temperatures, moved 5° to 60°C, unmoved -10° to 80°C

Resolution

9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution

Accuracy

+/- 0,5° in the range of -10°C to + 85°C

Operation

2 or 3-wire connection (data, ground and 5V, parasitic operation possible)

1-Wire device

DS18B20

Supply voltage

3 - 5.5 VDC

Scope of delivery

Cable sensor


Hint:
We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from +5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

1-Wire Interface:
  • DS18B20 Temperature Chip
  • Standard 1-Wire bus functions
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
Colour: gray
Connection type: Open cable ends
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
Design / Manufacturer: ESERA
Dimensions: 6 X 40 mm (LxW), molded
Enclosure: Stainless steel sleeve , alloy 1.4303, cast
Execution: 3 pin connector
Function: Temperature sensor
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP65
  • Protection class III
Internal sensors: Temperature measuring range -55 to + 125°C, accuracy +/- 0.5°C
Length: 1m
Number of inputs / outputs: 1 - channel output
Plug and Play support , Auto-E-Connect Support: Yes
Power supply, Supply Voltage: Voltage supply 2.8VDC to 5.5VDC
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Software Version / Support: without software
Temperature range, operation: -45°C to +125°C, Extended temperature range 3, (E3)
Temperature range, storage: -40°C bis +85°C, Extended temperature range 2, (E2)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

microSD SanDisk 8GB industrial version
microSD SanDisk memory card, industrial version Suitable for continuous operation with extended operating temperature range.   Design microSD Industrial Version / Industrial Memory Card Type microSDHC card Capacity 8GB Speed read: 80MB/s write 50MB/s Operating temperature -40°C to +85°C Specification Class 10 - UHS I Technology MLC memory system

From €29.61*

Product number: 42179

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

Kabelbinder Stahl 152mm
Kabelbinder aus rostfreiem StahlIdeal geeignet um Temperatursensoren an Heizungsrohren zu fixieren. Verschluss  Kugelverschluß Ausführung  Edelstahl Typ 304, Materialstärke 0,3mm Abmessungen 152x4,5mm Temperaturbereich  -80°C - +500°C Verpackungsmenge 5 Stück    

From €2.26*

Product number: 42624

Available, delivery time 1-5 days, depending on the carrier

Related products

Temperature sensor cable LC 1-Wire 1,8m
Low cost 1-Wire Temperature Sensor DS18B20 in stainless steel sleeve with PVC connection cable and open cable ends. The sensors are designed for measurement outdoors, on surfaces or in non-aggressive gases. The probes are not waterproof. The Temperature sensor can be connected directly to one of our 1-Wire bus couplers, 1-Wire controllers, 1-Wire hub or to many other controllers. Application: Contact sensor for heating systems, outdoor sensor Connection: Open cable ends, cable length approx. 1.8m Pin assignment: Red = +5V, Black = GND, Yellow = Data Operating temperature: max. cable temperatures, moved 5° to 60°C, unmoved -10° to 80°C Resolution: 9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution Accuracy +/- 0,5° in the range of -10°C - 85°C Operation 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) 1-Wire device: DS18B20 Supply voltage: 3 - 5.5 VDC Dimensions: diameter 6mm, length 50mm (without cable) Scope of delivery: Cable sensor Hint: We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from +5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €8.91*

Product number: 11139

Available, delivery time 1-5 days, depending on the carrier