Temperature sensor outdoor surface IP65

Quantity Unit price
1 to 49
€30.90*
50 to 99
€29.36*
From 100
€27.81*

Available, delivery time 1-5 days, depending on the carrier

Product number: 11100
EAN: 0782321213122
Manufacturer product ID: 11100
Product information "Temperature sensor outdoor surface IP65"
Waterproof outdoor temperature sensor for outdoor measurements or also for sauna, cold storage and industrial environments.
  • The temperature sensor outdoor is dustproof, jet-proof with sealing class IP65.
  • Due to the internal temperature sensor, the sensor is very well protected against wind influences.
  • The cable entry is sealed with a gland. 

Note on mounting: Many measurement errors are caused by mounting the thermometer in an unfavorable location. Measurement errors are caused, among other things, by direct sunlight, the intrinsic heat of a building (an intermediate layer of insulating material between the sensor housing and the house wall can help here) and the back radiation of a neighboring building. Here measurement errors of approx. 1-2° can occur.
An outdoor temperature sensor on buildings should be mounted e.g. in the north of a building at a height of approx. 2m. Translated with www.DeepL.com/Translator (free version)
1-Wire Interface:
  • DS18B20 Temperature Chip
  • Parasitic operation is supported (2-wire operation without 5V power supply)
  • Standard 1-Wire bus functions
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Classes Assignment: Output OWD sensor class via ECO controller
Colour: gray
Connection type: Push In terminal block
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
Design / Manufacturer: ESERA
Dimensions: 60 x 60 x 45mm (LxWxH)
Enclosure: ABS plastic, light gray (RAL7035)
Execution: 3 pin connector
Function: Sensoric
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP65
  • Protection class III
Internal sensors:
  • Internal backup capacitor / buffer / abblock capacitor for stable operation, important for industrial use
  • Temperature measuring range -40 to + 85°C, accuracy +/- 0.3°C
Measurement values: Temperature, °C
Mounting:
  • Housing
  • Outdoor / weather-protected area
  • Roof mounting
  • Wall mounting
  • wall mount
Number of inputs / outputs: 1 - channel input
Plug and Play support , Auto-E-Connect Support: Yes
Power supply, Supply Voltage: Voltage supply 2.8VDC to 5.5VDC
Protection circuit: ESD Schutz
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -40°C to +85°C, Extended temperature range 2, (E2)
Temperature range, storage: -40°C bis +85°C, Extended temperature range 2, (E2)
Version: Basic Version / Basic Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Related products

Flush-mounted temperature sensor for Berker, Jung, Merten
Temperature flush-mounted sensor for all 55mm switch ranges from the manufacturers Berker, Jung, Merten, Gira and many others. Living room sensor for precise temperature measurement in buildings, specially designed for all standard 55mm switch ranges This sensor allows for an attractive integration of a high-precision temperature sensor in the standard 55mm switch ranges. Optimal integration into standard switch ranges of many manufacturers Connection by screw terminal Blocking capacitor integrated for reliable operation even on longer connection cables High-precision sensor element for the 1-Wire bus Power supply via 2-wire (parasitic mode) or 3-wire system (ground,1-Wire +5V) We offer you matching covers from Berker in high-gloss white or matt. If we do not have the matching cover and adapter in our range, please ask us. Temperature sensor DS18B20 Accuracy +/- 0,5° in the range of -10°C - 85°C Resolution 9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution 1-Wire connection 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Operating voltage 3 - 5,5V= Power consumption approx. 1mA Connection: Push In Clamp (screwless) Dimensions (outside) 68 x 68 x 28mm (LxWxH) Scope of delivery Sensor element and operating instructions Delivery with or without covers/panels possible. Berker, Jung, Gira and Merten are a trademark or brand name of the respective companies and their owners.

From €22.41*

Product number: 11131M

Available, delivery time 1-5 days, depending on the carrier

Temperature sensor flush-mounted for Busch-Jaeger
Temperature flush-mounted sensor for switch ranges of the manufacturer Busch-Jaeger Living room sensor for precise temperature measurement in buildings, specially adapted to the switch ranges of the manufacturer Busch-Jaeger. With this sensor, a shapely integration of a high-precision temperature sensor into the very widespread switch ranges from Busch-Jaeger is possible. Optimum integration into Busch-Jaeger switch ranges Connection by screw terminal Blocking capacitor integrated for reliable operation even on longer connection cables High-precision sensor element for the 1-Wire bus Power supply via 2-wire (parasitic mode) or 3-wire system (ground,1-Wire +5V) Matching panels can be ordered in white or Alpine white. If we do not have the right cover for your Busch-Jaeger system in our range, please ask us. Temperature sensor DS18B20 Accuracy +/- 0,5° in the range of -10°C - 85°C Resolution 9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution 1-Wire connection 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Operating voltage 3 - 5,5V= Power consumption approx. 1mA Connection: Screw terminal Dimensions (outside) 68x68x12mm (LxWxH) Scope of delivery Sensor element and operating instructions Cover, frame can be ordered as well. Flush-mounted box is not included Busch-Jaeger is a trademark of Busch-Jaeger Elektro GmbH, Freisenbergstraße 2, 58513 Lüdenscheid and its respective owners.

Variants from €19.71*
From €23.31*

Product number: 11130M

Available, delivery time 1-5 days, depending on the carrier

Accessories

EOS 100 Multisensor Pro Outdoor
Multisensor Pro 100 Outdoor for humidity and temperature The EOS 100 is a professional outdoor multisensor of the latest generation for building, system and infrastructure monitoring.The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges. The EOS 100 has internal power and status LED indicators. The sensor finder LED function allows the sensor to be found quickly in large networks. TheESERA Plug and Play system, called Auto-E-Connect, installs the EOS 100 fully automatically in ECO controllers. The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered by ESERA GmbH as a German and European patent.The installation is done in a few minutes by Push In connection terminals.With a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.Highlights: Outdoor multisensor, waterproof High measurement accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) LED indicators for power, status and sensor finder Auto-E-Connect functions Processing of sensor values, therefore no complex formulas necessary Shapely industrial housing Universal outdoor sensor for IoT, industry and building automation

From €98.91*

Product number: 11169

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire temperature sensor, open cable ends, industrial, pro, waterproof, silicone cable
Length: 1m
1-Wire temperature sensor / contact sensor Pro Waterproof, robust connection cable and open cable ends. Unshielded cable Features: Available in the cable lengths 1m, 2m and 5m Professional high quality 1-Wire temperature sensor with stainless steel sleeve oil resistant connection cable open cable ends. The sensor can be operated permanently outdoors and in all environments in a temperature range from -55°C to +125°C The probes are suitable for permanent use in water due to IP68 class The temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. Therefore the temperature sensor is suitable for professional applications. You can find details about the topic decoupling / blocking capacitor in our eBook Examples of use: Temperature measurement of hot water tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in rough and conditionally aggressive environments  Connection: To connect the temperature sensors we recommend the 1-Wire distributor art.no. 11142 or the 1-Wire adapter 2 art.no. 11124 The temperature sensor can be operated directly at many 1-wire interfaces, e.g. the USB adapter, the ESERA 1-wire bus coupler, 1-wire controller or 1-wire gateway Operation in 2- or 3-wire technology is possible Execution: 1-Wire temperature sensor with robust connection cable in industrial quality. Special lengths and other versions are available on request. Version Contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Robust connection cable for professional applications Tightness IP68 Operating temperature   -55°C to 125°C Accuracy ±0.5° C typ. (from -10°C to +85°C), according to manufacturer's data sheet Connection / Cable Open cable ends with wire end sleeves for easy connection without previous electrical knowledge shielded robust connection cable with 5mm diameter Cable lengths available in 1m, 2m and 5m Wire colours: white = GND, green = 1-Wire Data (DQ), brown = 3-5.5VDC (VDD) Supply voltage    3 - 5.5 VDC max. 1mA Operating mode 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Resolution 9-12 bit adjustable via software 1-Wire device DS18B20 Protection tube 6 X 40 mm potted, Stainless steel 1.4303

From €12.51*

Product number: 11104-1-OK

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Industrial Temperature Sensor Pro Waterproof, Cable Probe
Length: 10m
1-Wire Temperature sensor / contact sensor Pro Waterproof with connection cable and modular plug Features Professional high-quality 1-Wire Temperature sensor with stainless steel sleeve with shielded, oil-resistant PUR connection cable and RJ11/RJ12 modular plug The sensor can be operated permanently outdoors and in all environments within a temperature range of - 55°C to +125 °C The probes are suitable for permanent use in water due to IP68 class The Temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. This makes the temperature sensor suitable for professional applications. You can find details on the subject of decoupling / blocking capacitors in our eBook Examples of use: Temperature measurement of hot water storage tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in harsh and conditionally aggressive environments Connection: To connect the Temperature sensors, we recommend the 1-Wire Distributor art.no.11141 or the 1-Wire Adapter, art.no. 11118 The Temperature sensor can be operated directly on many 1-Wire interfaces, e.g. the USB Adapter, the ESERA 1-Wire Bus coupler, 1-Wire Controller or 1-Wire Gateway Operation in 2- or 3- conductor technology is possible Execution: 1-Wire Temperature sensor with 2m connection cable and RJ11/RJ12 modular connector. Special lengths and other designs are also available on request. Design contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Shielded connection cable for professional applications or in environments with EMC interference Tightness IP68 Operating temperature - 55°C to +125°C Accuracy ±0.5°C typ. (from -10°C to +85°C), according to the data sheet of the manufacturer Connection / Cable RJ11/RJ12 modular plug for easy connection without previous electrical knowledge shielded robust PUR connection cable with 5mm diameter Cable length 2m Supply voltage 3 - 5.5 VDC max. 1mA Operating mode 2-or 3-conductor technology (data, ground and 5V, parasitic operation possible) Resolution 9 Bit fix 1-Wire device DS18S20 Protection tube 6 X 40 mm potted, stainless steel 1.4303

Variants from €25.11*
From €52.11*

Product number: 11106-10

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Industrial Temperature Sensor Pro Waterproof, Cable Probe
Length: 5m
1-Wire Temperature sensor / contact sensor Pro Waterproof with connection cable and modular plug Features Professional high-quality 1-Wire Temperature sensor with stainless steel sleeve with shielded, oil-resistant PUR connection cable and RJ11/RJ12 modular plug The sensor can be operated permanently outdoors and in all environments within a temperature range of - 55°C to +125 °C The probes are suitable for permanent use in water due to IP68 class The Temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. This makes the temperature sensor suitable for professional applications. You can find details on the subject of decoupling / blocking capacitors in our eBook Examples of use: Temperature measurement of hot water storage tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in harsh and conditionally aggressive environments Connection: To connect the Temperature sensors, we recommend the 1-Wire Distributor art.no.11141 or the 1-Wire Adapter, art.no. 11118 The Temperature sensor can be operated directly on many 1-Wire interfaces, e.g. the USB Adapter, the ESERA 1-Wire Bus coupler, 1-Wire Controller or 1-Wire Gateway Operation in 2- or 3- conductor technology is possible Execution: 1-Wire Temperature sensor with 2m connection cable and RJ11/RJ12 modular connector. Special lengths and other designs are also available on request. Design contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Shielded connection cable for professional applications or in environments with EMC interference Tightness IP68 Operating temperature - 55°C to +125°C Accuracy ±0.5°C typ. (from -10°C to +85°C), according to the data sheet of the manufacturer Connection / Cable RJ11/RJ12 modular plug for easy connection without previous electrical knowledge shielded robust PUR connection cable with 5mm diameter Cable length 2m Supply voltage 3 - 5.5 VDC max. 1mA Operating mode 2-or 3-conductor technology (data, ground and 5V, parasitic operation possible) Resolution 9 Bit fix 1-Wire device DS18S20 Protection tube 6 X 40 mm potted, stainless steel 1.4303

Variants from €25.11*
From €34.11*

Product number: 11106-5

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Industrial Temperature Sensor Pro Waterproof, Serial Number, Cable Sensor
Length: 5m
1-Wire temperature sensor / contact sensor Pro Waterproof with PUR connection cable, modular plug and serial number Features: Professional and robust shielded 1-Wire temperature sensor with stainless steel sleeve with shielded, oil-resistant PUR connection cable and RJ11/RJ12 modular plug Our highest quality industrial sensors! The 1-Wire serial number is attached to the cable The sensor can be operated permanently outdoors and in all environments in a temperature range from -55°C to +125°C The probes are suitable for permanent use in water due to IP68 class The temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. Therefore the temperature sensor is suitable for professional applications. You can find details about the topic decoupling / blocking capacitor in our eBook Examples of use: Temperature measurement of hot water tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in rough and conditionally aggressive environments  Connection: To connect the temperature sensors we recommend the 1-Wire distributor, art. no. 11141 or the 1-Wire adapter, art. no. 11118 The temperature sensor can be operated directly at many 1-wire interfaces, e.g. the USB adapter, the ESERA 1-wire bus coupler, 1-wire controller or 1-wire gateway Operation in 2- or 3-wire technology is possible Execution: 1-Wire temperature sensor with 2m connection cable and RJ11/RJ12 modular connector. Special lengths and other versions are available on request. Version contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Shielded connection cable for professional applications or in environments with EMC interference Tightness IP68 Operating temperature   -55° to 125°C Accuracy ±0.5° C typ. (from -10°C to +85°C), according to manufacturer's data sheet Connection / Cable RJ11/RJ12 modular plugs for easy connection without previous electrical knowledge shielded robust PUR connection cable with 5mm diameter Cable length 2m Supply voltage    3 - 5.5 VDC max. 1mA Operating mode 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Resolution 9 Bit fix 1-Wire device DS18S20 Protection tube 6 X 40 mm potted, Stainless steel 1.4303

Variants from €25.11*
From €30.51*

Product number: 11106-5-S

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire temperature sensor, open cable ends, industrial, pro, waterproof, silicone cable
Length: 2m
1-Wire temperature sensor / contact sensor Pro Waterproof, robust connection cable and open cable ends. Unshielded cable Features: Available in the cable lengths 1m, 2m and 5m Professional high quality 1-Wire temperature sensor with stainless steel sleeve oil resistant connection cable open cable ends. The sensor can be operated permanently outdoors and in all environments in a temperature range from -55°C to +125°C The probes are suitable for permanent use in water due to IP68 class The temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. Therefore the temperature sensor is suitable for professional applications. You can find details about the topic decoupling / blocking capacitor in our eBook Examples of use: Temperature measurement of hot water tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in rough and conditionally aggressive environments  Connection: To connect the temperature sensors we recommend the 1-Wire distributor art.no. 11142 or the 1-Wire adapter 2 art.no. 11124 The temperature sensor can be operated directly at many 1-wire interfaces, e.g. the USB adapter, the ESERA 1-wire bus coupler, 1-wire controller or 1-wire gateway Operation in 2- or 3-wire technology is possible Execution: 1-Wire temperature sensor with robust connection cable in industrial quality. Special lengths and other versions are available on request. Version Contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Robust connection cable for professional applications Tightness IP68 Operating temperature   -55°C to 125°C Accuracy ±0.5° C typ. (from -10°C to +85°C), according to manufacturer's data sheet Connection / Cable Open cable ends with wire end sleeves for easy connection without previous electrical knowledge shielded robust connection cable with 5mm diameter Cable lengths available in 1m, 2m and 5m Wire colours: white = GND, green = 1-Wire Data (DQ), brown = 3-5.5VDC (VDD) Supply voltage    3 - 5.5 VDC max. 1mA Operating mode 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Resolution 9-12 bit adjustable via software 1-Wire device DS18B20 Protection tube 6 X 40 mm potted, Stainless steel 1.4303

Variants from €12.51*
From €14.31*

Product number: 11104-2-OK

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Industrial Temperature Sensor Pro Waterproof, Serial Number, Cable Sensor
Length: 2m
1-Wire temperature sensor / contact sensor Pro Waterproof with PUR connection cable, modular plug and serial number Features: Professional and robust shielded 1-Wire temperature sensor with stainless steel sleeve with shielded, oil-resistant PUR connection cable and RJ11/RJ12 modular plug Our highest quality industrial sensors! The 1-Wire serial number is attached to the cable The sensor can be operated permanently outdoors and in all environments in a temperature range from -55°C to +125°C The probes are suitable for permanent use in water due to IP68 class The temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. Therefore the temperature sensor is suitable for professional applications. You can find details about the topic decoupling / blocking capacitor in our eBook Examples of use: Temperature measurement of hot water tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in rough and conditionally aggressive environments  Connection: To connect the temperature sensors we recommend the 1-Wire distributor, art. no. 11141 or the 1-Wire adapter, art. no. 11118 The temperature sensor can be operated directly at many 1-wire interfaces, e.g. the USB adapter, the ESERA 1-wire bus coupler, 1-wire controller or 1-wire gateway Operation in 2- or 3-wire technology is possible Execution: 1-Wire temperature sensor with 2m connection cable and RJ11/RJ12 modular connector. Special lengths and other versions are available on request. Version contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Shielded connection cable for professional applications or in environments with EMC interference Tightness IP68 Operating temperature   -55° to 125°C Accuracy ±0.5° C typ. (from -10°C to +85°C), according to manufacturer's data sheet Connection / Cable RJ11/RJ12 modular plugs for easy connection without previous electrical knowledge shielded robust PUR connection cable with 5mm diameter Cable length 2m Supply voltage    3 - 5.5 VDC max. 1mA Operating mode 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Resolution 9 Bit fix 1-Wire device DS18S20 Protection tube 6 X 40 mm potted, Stainless steel 1.4303

From €25.11*

Product number: 11106-2-S

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire temperature sensor, open cable ends, serial number, Industrial Pro, waterproof, silicone cable
Length: 5m
1-Wire temperature sensor / contact sensor Pro Waterproof, robust connection cable, open cable ends and serial number flags. Silicone - Cable Features: Available in the cable lengths 1m, 2m and 5m Professional high quality 1-Wire temperature sensor with stainless steel sleeve oil resistant connection cable open cable ends with a flag bearing the 1-Wire serial number. The sensor can be operated permanently outdoors and in all environments in a temperature range from -55°C to +125°C The probes are suitable for permanent use in water due to IP68 class The temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. Therefore the temperature sensor is suitable for professional applications. You can find details about the topic decoupling / blocking capacitor in our eBook Examples of use: Temperature measurement of hot water tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in rough and conditionally aggressive environments  Connection: To connect the temperature sensors we recommend the 1-Wire distributor art.no. 11142 or the 1-Wire adapter 2 art.no. 11124 The temperature sensor can be operated directly on many 1-wire interfaces, e.g. the ESERA 1-wire bus coupler, 1-wire controller or 1-wire gateway or also USB adapters,  Operation in 2- or 3-wire technology is possible Execution: 1-Wire temperature sensor with robust connection cable in industrial quality. Special lengths and other versions are available on request. Version Contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Robust connection cable for professional applications Tightness IP68 Operating temperature   -55°C to 125°C Accuracy ±0.5° C typ. (from -10°C to +85°C), according to manufacturer's data sheet Connection / Cable Open cable ends with wire end sleeves for easy connection without previous electrical knowledge shielded robust connection cable with 5mm diameter Cable lengths available in 1m, 2m and 5m Wire colours: white = GND, green = 1-Wire Data (DQ), brown = 3-5.5VDC (VDD) Supply voltage    3 - 5.5 VDC max. 1mA Operating mode 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Resolution 9-12 bit adjustable via software 1-Wire device DS18B20 Protection tube 6 X 40 mm potted, Stainless steel 1.4303                                      

Variants from €17.01*
From €18.81*

Product number: 11104-5-OKS

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Industrial Temperature Sensor Pro Waterproof, Cable Probe
Length: 2m
1-Wire Temperature sensor / contact sensor Pro Waterproof with connection cable and modular plug Features Professional high-quality 1-Wire Temperature sensor with stainless steel sleeve with shielded, oil-resistant PUR connection cable and RJ11/RJ12 modular plug The sensor can be operated permanently outdoors and in all environments within a temperature range of - 55°C to +125 °C The probes are suitable for permanent use in water due to IP68 class The Temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. This makes the temperature sensor suitable for professional applications. You can find details on the subject of decoupling / blocking capacitors in our eBook Examples of use: Temperature measurement of hot water storage tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in harsh and conditionally aggressive environments Connection: To connect the Temperature sensors, we recommend the 1-Wire Distributor art.no.11141 or the 1-Wire Adapter, art.no. 11118 The Temperature sensor can be operated directly on many 1-Wire interfaces, e.g. the USB Adapter, the ESERA 1-Wire Bus coupler, 1-Wire Controller or 1-Wire Gateway Operation in 2- or 3- conductor technology is possible Execution: 1-Wire Temperature sensor with 2m connection cable and RJ11/RJ12 modular connector. Special lengths and other designs are also available on request. Design contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Shielded connection cable for professional applications or in environments with EMC interference Tightness IP68 Operating temperature - 55°C to +125°C Accuracy ±0.5°C typ. (from -10°C to +85°C), according to the data sheet of the manufacturer Connection / Cable RJ11/RJ12 modular plug for easy connection without previous electrical knowledge shielded robust PUR connection cable with 5mm diameter Cable length 2m Supply voltage 3 - 5.5 VDC max. 1mA Operating mode 2-or 3-conductor technology (data, ground and 5V, parasitic operation possible) Resolution 9 Bit fix 1-Wire device DS18S20 Protection tube 6 X 40 mm potted, stainless steel 1.4303

From €25.11*

Product number: 11106-2

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire temperature sensor, open cable ends, serial number, Industrial Pro, waterproof, silicone cable
Length: 1m
1-Wire temperature sensor / contact sensor Pro Waterproof, robust connection cable, open cable ends and serial number flags. Silicone - Cable Features: Available in the cable lengths 1m, 2m and 5m Professional high quality 1-Wire temperature sensor with stainless steel sleeve oil resistant connection cable open cable ends with a flag bearing the 1-Wire serial number. The sensor can be operated permanently outdoors and in all environments in a temperature range from -55°C to +125°C The probes are suitable for permanent use in water due to IP68 class The temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. Therefore the temperature sensor is suitable for professional applications. You can find details about the topic decoupling / blocking capacitor in our eBook Examples of use: Temperature measurement of hot water tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in rough and conditionally aggressive environments  Connection: To connect the temperature sensors we recommend the 1-Wire distributor art.no. 11142 or the 1-Wire adapter 2 art.no. 11124 The temperature sensor can be operated directly on many 1-wire interfaces, e.g. the ESERA 1-wire bus coupler, 1-wire controller or 1-wire gateway or also USB adapters,  Operation in 2- or 3-wire technology is possible Execution: 1-Wire temperature sensor with robust connection cable in industrial quality. Special lengths and other versions are available on request. Version Contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Robust connection cable for professional applications Tightness IP68 Operating temperature   -55°C to 125°C Accuracy ±0.5° C typ. (from -10°C to +85°C), according to manufacturer's data sheet Connection / Cable Open cable ends with wire end sleeves for easy connection without previous electrical knowledge shielded robust connection cable with 5mm diameter Cable lengths available in 1m, 2m and 5m Wire colours: white = GND, green = 1-Wire Data (DQ), brown = 3-5.5VDC (VDD) Supply voltage    3 - 5.5 VDC max. 1mA Operating mode 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Resolution 9-12 bit adjustable via software 1-Wire device DS18B20 Protection tube 6 X 40 mm potted, Stainless steel 1.4303                                      

From €17.01*

Product number: 11104-1-OKS

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire temperature sensor, open cable ends, industrial, pro, waterproof, silicone cable
Length: 5m
1-Wire temperature sensor / contact sensor Pro Waterproof, robust connection cable and open cable ends. Unshielded cable Features: Available in the cable lengths 1m, 2m and 5m Professional high quality 1-Wire temperature sensor with stainless steel sleeve oil resistant connection cable open cable ends. The sensor can be operated permanently outdoors and in all environments in a temperature range from -55°C to +125°C The probes are suitable for permanent use in water due to IP68 class The temperature sensors are of very good quality, are manufactured in Germany and include an integrated decoupling capacitor. Therefore the temperature sensor is suitable for professional applications. You can find details about the topic decoupling / blocking capacitor in our eBook Examples of use: Temperature measurement of hot water tanks Installation on heating pipes (e.g. flow and return temperature) Temperature measurement of outdoor pools, swimming pools and ponds Floor heating systems for overtemperature monitoring Suitable for temperature measurement in rough and conditionally aggressive environments  Connection: To connect the temperature sensors we recommend the 1-Wire distributor art.no. 11142 or the 1-Wire adapter 2 art.no. 11124 The temperature sensor can be operated directly at many 1-wire interfaces, e.g. the USB adapter, the ESERA 1-wire bus coupler, 1-wire controller or 1-wire gateway Operation in 2- or 3-wire technology is possible Execution: 1-Wire temperature sensor with robust connection cable in industrial quality. Special lengths and other versions are available on request. Version Contact sensor in stainless steel sleeve, waterproof, with integrated decoupling capacitor for trouble-free operation The sensor is permanently waterproof Robust connection cable for professional applications Tightness IP68 Operating temperature   -55°C to 125°C Accuracy ±0.5° C typ. (from -10°C to +85°C), according to manufacturer's data sheet Connection / Cable Open cable ends with wire end sleeves for easy connection without previous electrical knowledge shielded robust connection cable with 5mm diameter Cable lengths available in 1m, 2m and 5m Wire colours: white = GND, green = 1-Wire Data (DQ), brown = 3-5.5VDC (VDD) Supply voltage    3 - 5.5 VDC max. 1mA Operating mode 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Resolution 9-12 bit adjustable via software 1-Wire device DS18B20 Protection tube 6 X 40 mm potted, Stainless steel 1.4303

Variants from €12.51*
From €17.01*

Product number: 11104-5-OK

Available, delivery time 1-5 days, depending on the carrier