MSP 105 1-Wire Multisensor Pro Air Humidity and Temperature Sensor

Quantity Unit price
1 to 49
€65.90*
50 to 99
€62.61*
From 100
€59.31*

Available, delivery time 1-5 days, depending on the carrier

Product number: 11150
EAN: 0782321213313
Manufacturer product ID: 11150
Product information "MSP 105 1-Wire Multisensor Pro Air Humidity and Temperature Sensor"

Elegant multisensor for humidity and temperature Pro for 1-Wire bus system
for professional applications, e.g. public institutions, authorities, machines etc.

Highlights

  • Professional Temperature and humidity sensor for private, schools, public buildings and companies
  • Full support for ESERA Plug and Play system (Auto-E-Connect)
  • Universal surface mounting
  • Elegant and high quality sensor housing
  • Simple power supply (5VDC)

Function:

  • With the MSP105 1-Wire Multisensor Pro for temperature and humidity, simple monitoring of the room climate is possible. The MSP105 has an attractive sensor housing (surface mounting).
  • With the help of the air humidity sensor, the humidity conditions in the environment are monitored and a warning could be issued via the evaluation software about possible dangers due to mold growth.
  • The MSP105 Multisensor Pro is an important sensor for heating and ventilation systems and is a main component of a single room control.
  • In combination with 1-Wire switching modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated.

Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with article number 11134.

1-Wire Interface: DS2438 instruction set with Plug and Play support (Auto-E-Connect Functions)
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Automatic library mapping: The appropriate library is mapped fully automatically for the sensor
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
Colour: white
Connection type: Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
Design / Manufacturer: ESERA
Dimensions: 80 x 80 x 35 mm (LxWxH)
Enclosure: ABS plastic, softline white
Execution: 3 pin connector
Function: Sensoric
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP20
  • Protection class III
Internal sensors:
  • Humidity, relative, measuring range 0-100%, accuracy 3%
  • Temperature measuring range -40 to + 85°C, accuracy +/- 0.3°C
Measurement values:
  • Air humidity, relative humidity, rel. %
  • Temperature, °C
Mounting:
  • Housing
  • Wall mounting
  • wall mount
Plug and Play support , Auto-E-Connect Support: Yes
Power Consumption: 0.006W, 20mA at 5V
Power supply, Supply Voltage: System supply, 5VDC (1-Wire main voltage)
Protection circuit:
  • Enhanced ESD protection with ±4kV according to IEC 61000-4
  • Overvoltage protection for the voltage supply / power supply
  • Reverse polarity protection for voltage supply / power supply
  • Signal line overvoltage protection (1-Wire Protector) provides protection against high voltage faults up to 28VDC
  • Signal line overvoltage protection against high voltage faults
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -5°C to +50°C, standard temperature range
Temperature range, storage: -5°C bis +50°C, Standard temperature range
Version: Professional Version / Professional Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 2 RJ12 passive
1-Wire distributor with 6 outputs RJ12 modular connectors Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling. Connection 1-Wire Bus Input push-in terminal* and RJ45 socket (connected in parallel) Assignment bus connection 5V, 12, Data and GND (connection RJ45 and push-in terminal) Connection temperature sensors 6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND) Operating voltage 3 - 5.5VDC Operating current max. 500mA Assembly Designed for top hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Available, delivery time 1-5 days, depending on the carrier

Tip
ECO 10 1-Wire Controller, intelligent system interface
ECO 10, 3rd generation 1-Wire controller, the intelligent system interface to all smart home controllers The ECO 10 1-Wire Controller represents a high performance 3rd generation 1-Wire interface for sensors and actuators. Key Features Fully automatic integration of sensors* and actuators* Auto-E-Connect Support Level I and II 1-Wire controller for autonomous communication and updating of the 1-Wire network. Fast readout of all up to 30 1-Wire sensors, actuators or chips in 1-3 second cycles Cyclic output of the processed 1-Wire data in 10 second intervals and in plain text Data communication via socket server/client, TCP or UDP Designed for small to large 1-Wire networks Power supply of the 1-Wire network with 5V voltage Top-hat rail housing for control cabinet installation Wide supply voltage range 9-30VDC Management of all ESERA sensors and actuators with suitable libraries and many standard 1-Wire modules and chips Extensive software for commissioning, configuration and analysis Whatever system you want to use, the ECO 10, the intelligent system interface, is ready for it. Do you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, FHEM, ..., no problem. All systems can access 1-Wire sensors and actuators via the ECO 10 1-Wire controller. The ECO 10 allows the automatic integration of all 1-Wire sensors* with Auto-E-Connect to all controllers such as PLC or PC systems without having special knowledge about the 1-Wire protocol. /* Style Definitions */ table.MsoNormalTable {mso-style-name: "NormalTable"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family: "Times New Roman",serif;}

From €175.41*

Product number: 11601-24

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €284.31*

Product number: 11604-24

Available, delivery time 1-5 days, depending on the carrier

1-Wire Gateway 10 Modbus RTU
Whichever system you want to use, the 1-Wire Gateway 10 with Modbus TCP is ready. If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gatway 10. The 1-Wire Gateway 10 enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via Modbus protocol. The 1-Wire Gateway 10 represents a complete subsystem to your PLC control and manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. The 1-Wire Gateway 10 has extensive configuration and formatting options. Up to 30 1-Wire devices can be read out in parasitic and standard mode at 1-2 second intervals. The 1-Wire Gateway 11 Modbus 10 is designed for the operation of all 1-Wire network sizes. Application Autonomous subsystem with many automatic functions Independent administration of 1-Wire network Modbus and standard ASCII protocol Data interface Modbus RTU (RS485) slave, 4-pole connector (serial RS485) with switchable terminating resistor 120R Configuration interface USB, Mini-USB 1.1 (VSP via FT232 interface) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450 and all modules from ESERA-Automation Supply voltage 9-30VDC, 0.5A max, Output 1-Wire Interface GND, Data, +5V max. 0.2A Dimensions 32 x 71 x 90mm (WxHxD) Protection type / protection class III, IP20 Assembly Designed for top hat rail Connection Screw terminals Scope of delivery Module (without power supply unit) and operating instructions Unlike the 1-Wire controller  "speaks" the 1-Wire Gateway 10 ASCII text and Modbus protocol.

From €265.41*

Product number: 11324

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Gateway 10 Modbus RTU
Whichever system you want to use, the 1-Wire Gateway 10 with Modbus TCP is ready. If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gatway 10. The 1-Wire Gateway 10 enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via Modbus protocol. The 1-Wire Gateway 10 represents a complete subsystem to your PLC control and manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. The 1-Wire Gateway 10 has extensive configuration and formatting options. Up to 30 1-Wire devices can be read out in parasitic and standard mode at 1-2 second intervals. The 1-Wire Gateway 11 Modbus 10 is designed for the operation of all 1-Wire network sizes. Application Autonomous subsystem with many automatic functions Independent administration of 1-Wire network Modbus and standard ASCII protocol Data interface Modbus RTU (RS485) slave, 4-pole connector (serial RS485) with switchable terminating resistor 120R Configuration interface USB, Mini-USB 1.1 (VSP via FT232 interface) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450 and all modules from ESERA-Automation Supply voltage 9-30VDC, 0.5A max, Output 1-Wire Interface GND, Data, +5V max. 0.2A Dimensions 32 x 71 x 90mm (WxHxD) Protection type / protection class III, IP20 Assembly Designed for top hat rail Connection Screw terminals Scope of delivery Module (without power supply unit) and operating instructions Unlike the 1-Wire controller  "speaks" the 1-Wire Gateway 10 ASCII text and Modbus protocol.

From €72.81*

Product number: 11324-GB

Available, delivery time 1-5 days, depending on the carrier

ESERA-Station 200 Smart Home IoT
ESERA-Station 200 - expandable, open and future-proof Central control with integrated professional 1-Wire interface for Smart Building, IoT and general automation applicationsTheESERA-Station is the central control unit of your Smart Home and for Internet of Things (IoT). The ESERA station is more like another central controller. It is an open platform, is a combination of an embedded computer and professional ESERA ECO controller. It is an open automation control center built on standards.ESERA station is usable for a variety of software packages, Codesys*****, IP-Symcon, OpenHAB, FHEM, NodeRed and many more, built on a Raspberry Pi 3b.Thefollowing modules are integrated in the ESERA-Station 200:Powerful ARM Quad Core Embedded Computer, Raspberry Pi 3b New in 2021ECO 200 1-Wire controller of the latest generationwithPlug and Play system (Auto-E-Connect Support) for 1-Wire.No matter which IoT or automation system you are already using or still planning to use, you can combine them with ESERA Station 200.You can combine the following systems with ESERA Station 200: The listed systems are exemplary and depend on the installed application software and hardware extensions. Wired / Cable systems / Bus systems*** (Exemplary) Radio based / Radio systems*** (Exemplary) ESERA 1-Wire Gateway (ASCII and Modbus RTU software interface) EnOcean* KNX* (IP-Symcon, Codesys*****) HomeMatic* digitalSTROM* (IP-Symcon) XBee/Zigbee* LCN* (IP-Symcon) xComfort* DMX lighting technology** (IP-Symcon) Z-Wave* ModBus TCP/RTU**, Slave / Master (IP-Symcon, Codesys*****) Voice control from Amazon (Alexa)*, *** M-Bus* (IP-Symcon) PLC Siemens* / WAGO* / Beckhoff* (IP-Symcon, Codesys*****) PROFINET Controller / Device (Codesys*****) EtherCAT Master (Codesys*****) CANopen Master / Slave (Codesys*****) EtherNet/IP Scanner / Adapter (Codesys*****) * An additional gateway is required for operation. This is not included in the scope of delivery.** The optional RS485 interface is required for operation. The RS485 interface can be ordered together with the Station 200.*** The functions depend on the installed application software. The listed systems are related to the operation with IP-Symcon and Codesys and are to be understood as an example. The scope of functions can be found in the respective application software.**** ESERA sensors and actuators of the Pro series with Auto-E-Connect support are required.***** The offered CODESYS Runtime is intended for testing and teaching purposes. All scripts, software modules and extensions of IP-Symcon can be used. To manage and configure your smart home or smart system, the IP-Symcon management console is available for temptation. After installing the runtime environment, the Raspberry Pi can be programmed as a PLC using the CODESYS Development System.The product is installed into the Linux distribution Raspbian via the CODESYS Development System using the included CODESYS Deploy Tool extension. After each restart of the Raspberry Pi, the runtime system is automatically started.

From €392.31*

Product number: 19200-1M

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Available, delivery time 1-5 days, depending on the carrier

Related products

Tip
1-Wire Multisensor Air Quality Humidity and Temperature Pro I
Elegant multisensor for air quality, humidity and temperature Pro 1 with KI - technologywith "air quality traffic light for private and commercial use This is the first multisensor from ESERA in which an AI (machine learning) is used for the automatic calibration of the sensor. This is a small milestone in the field of VOC sensors and for ESERA.The advantage for you is that the calibration of the sensor is performed fully automatically and autonomously. This makes the measurement result more accurate and always adapted to the individual environmental conditions. It is therefore really "YOUR" sensor.The sensor can be be used in stand-alone operation or with bus connection.With the 1-Wire Multisensor a simple monitoring of the room climate is possible. It is one of the few sensors on the market that combines all three sensor types in one stylish sensor housing. The air quality is displayed in the form of a "traffic light" with green, yellow and red indicators. The "traffic light" is switched off in the dark by an integrated light sensor. This makes the sensor also suitable for children's rooms and bedrooms.

From €137.61*

Product number: 11151

Available, delivery time 1-5 days, depending on the carrier

1-Wire Multisensor Air Quality Humidity and Temperature Sensor Pro II
Elegant Multisensor for air quality, humidity and temperature Pro II for 1-Wire bus system without "Air quality traffic light", for professional applications, such as public institutions, authorities etc. - High measuring accuracy for temperature, humidity (300 - 400% more accurate than standard 1-Wire sensors) and air quality - low power consumption - processing of the sensor values, therefore no complex formulas necessary - - wall sensor (surface mounting) With the multi-sensor for air quality (or called air quality), temperature and humidity, it is easy to monitor the indoor climate. It is one of the few sensors on the market that combines all three types of sensors in one attractive sensor housing. The air quality sensor used operates on the basis of a VOC mixed gas sensor. With the help of the air quality sensor, a statement on the current air quality and advice on ventilation can be given. With the help of the humidity sensor, the humidity conditions in the room are monitored and a warning about possible mould growth could be issued via the evaluation software. All sensors together make up an important sensor for heating and ventilation systems and are a main component of individual room control. In combination with switch modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated. 1-Wire components DS2438 Multisensor for temperature, humidity and air quality Temperature Temperature sensor with very high accuracy Measuring range - 40°C to +60°C (limited by the housing, sensor itself - 40°C to +125°C) Accuracy +/- 0.3° in the range of -10°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity Sensor with high accuracy Air humidity sensor Capacitive sensor Measuring range air humidity 0 -100% rel. air humidity Accuracy +/-3,5 % Repeatability 0,5% Resolution 12 bit, approx. 0.1% humidity Air quality VOC sensor with very high accuracy and low energy consumption Air Quality Sensor Type Mixed Gas Sensor (VCO Sensor) Measuring range air quality 400 - 3500 ppm (CO2 equivalent) Accuracy +/- 5%, depending on the air composition 1-Wire connection 3 - wire connection (data, ground and 5V), parasitic operation not supported Operating voltage 5 V= (+10%/-20%) Power consumption approx. 25mA Connection push-in terminal Dimensions (outside) 80 x 80 x 32mm (LxWxH) Note: Unfortunately, the Loxone 1-Wire Extension does not support the functional range of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with the article number 11127, which we produce on request.

From €177.21*

Product number: 11152

Available, delivery time 1-5 days, depending on the carrier

MS105 1-Wire Multisensor temperature, humidity living room flush-mounted for Berker, Jung, Merten Kopie
MS105 1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.

Variants from €59.31*
From €48.52*

Product number: 11132

Available, delivery time 1-5 days, depending on the carrier

1-Wire Multisensor Pro temperature, humidity living room flush-mounted for Berker, Jung, Merten
1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.

Variants from €59.31*
From €69.21*

Product number: 11160-3

Available, delivery time 1-5 days, depending on the carrier