|1 to 49||
|50 to 99||
Available, delivery time 1-5 days, depending on the carrier
With the 1-Wire Analog Input Module 4 DC voltage sources can be measured independently from each other with a voltage range of 0-10VDC.
As an example, pressure sensors, brightness sensors or other transducers can be read in.
The inputs have a common ground potential and are electrically isolated from the 1-wire bus. This prevents ground loops or problems caused by potential differences.
The inputs have reverse polarity protection, overvoltage protection and input filters.
|Measuring input||4 channels, 0-10VDC with common ground
|Input resistance||200 kOhm|
|Isolation||Electrical isolation between measuring input (Anlog input) and bus interface|
|Bus Interface||1-Wire Bus (GND, Data, 12VDC)|
|1-Wire function||DS2450 command set (see operating instructions for details)
|Power consumption||approx. 15mA / 12V|
|Installation||Control cabinet installation (top hat rail)|
|Housing colour||Green (Different from the illustration)|
|Connection||Screw terminals for 1-Wire bus and measuring input
|Assembly||Designed for top hat rail|
|Dimensions||2HP, 32 x 71x 90mm (WxHxD)|
|Scope of delivery||Finished device and operating instructions|
|Connection type:||Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section|
|Dimensions:||2TE, 32 x 90 x 70mm (LxWxH)|
|Enclosure:||ABS plastic with high percentage of recycled plastic, green (RAL 6020)|
|Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):||Protection class III|
|Isolation:||Electrical isolation between measurement input (analog input) and bus interface|
|Mounting:||Intended for control cabinet installation (top-hat rail).|
|Power supply, Supply Voltage:||12VDC|
|Scope of delivery:||Device and user manual|
|measuring input:||4 channels, 0-10VDC with common ground|
|power consumption:||~15mA / 12V|
0 of 0 reviews