1-Wire Multisensor Air Quality Humidity and Temperature Sensor Pro II

Quantity Unit price
1 to 49
€185.90*
50 to 99
€176.61*
From 100
€167.31*

Available, delivery time 1-5 days, depending on the carrier

Product number: 11165
EAN: 0782321213146
Manufacturer product ID: 11165
Product information "1-Wire Multisensor Air Quality Humidity and Temperature Sensor Pro II"

Elegant Multisensor for air quality, humidity and temperature Pro II for 1-Wire bus system without "Air quality traffic light", for professional applications, such as public institutions, authorities etc.

- High measuring accuracy for temperature, humidity (300 - 400% more accurate than standard 1-Wire sensors) and air quality
- low power consumption
- processing of the sensor values, therefore no complex formulas necessary -
- wall sensor (surface mounting)




With the multi-sensor for air quality (or called air quality), temperature and humidity, it is easy to monitor the indoor climate. It is one of the few sensors on the market that combines all three types of sensors in one attractive sensor housing. The air quality sensor used operates on the basis of a VOC mixed gas sensor.

With the help of the air quality sensor, a statement on the current air quality and advice on ventilation can be given. With the help of the humidity sensor, the humidity conditions in the room are monitored and a warning about possible mould growth could be issued via the evaluation software.

All sensors together make up an important sensor for heating and ventilation systems and are a main component of individual room control.
In combination with switch modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated.

1-Wire components

DS2438 Multisensor for temperature, humidity and air quality

Temperature

Temperature sensor with very high accuracy

Measuring range

- 40°C to +60°C (limited by the housing, sensor itself - 40°C to +125°C)

Accuracy

+/- 0.3° in the range of -10°C - 85°C

Resolution

12 bit, 0.0625°C/bit

Air humidity

Sensor with high accuracy

Air humidity sensor

Capacitive sensor

Measuring range air humidity

0 -100% rel. air humidity

Accuracy

+/-3,5 %

Repeatability

0,5%

Resolution

12 bit, approx. 0.1% humidity

Air quality

VOC sensor with very high accuracy and low energy consumption

Air Quality Sensor Type

Mixed Gas Sensor (VCO Sensor)

Measuring range air quality

400 - 3500 ppm (CO2 equivalent)

Accuracy

+/- 5%, depending on the air composition

1-Wire connection

3 - wire connection (data, ground and 5V), parasitic operation not supported

Operating voltage

5 V= (+10%/-20%)

Power consumption

approx. 25mA

Connection

push-in terminal

Dimensions (outside)

80 x 80 x 32mm (LxWxH)

Note: Unfortunately, the Loxone 1-Wire Extension does not support the functional range of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with the article number 11127, which we produce on request.

1 wire building block: DS2438 multisensor for temperature, humidity and air quality
1 wire connection: 3-wire connection (data, ground and 5V), parasitic operation not supported
Connection type: Push In terminal block
Design / Manufacturer: ESERA
Dimensions: 80 x 80 x 32 (LxBxH)
Function: Sensoric
Measurement values:
  • Air humidity, relative humidity, rel. %
  • Indoor Air Quality, VOC (Volatile Organic Compounds)
  • Temperature, °C
Mounting:
  • Housing
  • Wall mounting
  • wall mount
Resolution: 9 - 12 bits, 0.5°C - 0.0625°C/bit depending on the selected resolution
Sensoren:
  • Air Quality: Mixed Gas Sensor (VCO Sensor)
  • Humidity: Sensor with high accuracy
  • Temperature: Sensor with very high accuracy
accuracy:
  • Air quality: +/- 5%, depending on the composition of the air
  • Humidity: +/-3.5%
  • Temp: +/- 0,3° in the range of -10°C - 85°C
measuring range:
  • Air quality: 400 - 3500 ppm (CO2 equivalent)
  • Humidity: 0 -100% rel. humidity
  • Temp: - 40°C to +60°C (limited by the housing, sensor itself - 40°C to +125°C)
operating voltage: 5 V= (+10%/-20%)
power consumption: ~25mA

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

Tip
1-Wire Multisensor Air Quality Humidity and Temperature Pro I
Elegant multisensor for air quality, humidity and temperature Pro 1 with KI - technologywith "air quality traffic light for private and commercial use This is the first multisensor from ESERA in which an AI (machine learning) is used for the automatic calibration of the sensor. This is a small milestone in the field of VOC sensors and for ESERA.The advantage for you is that the calibration of the sensor is performed fully automatically and autonomously. This makes the measurement result more accurate and always adapted to the individual environmental conditions. It is therefore really "YOUR" sensor.The sensor can be be used in stand-alone operation or with bus connection.With the 1-Wire Multisensor a simple monitoring of the room climate is possible. It is one of the few sensors on the market that combines all three sensor types in one stylish sensor housing. The air quality is displayed in the form of a "traffic light" with green, yellow and red indicators. The "traffic light" is switched off in the dark by an integrated light sensor. This makes the sensor also suitable for children's rooms and bedrooms.

From €137.61*

Product number: 11151

Available, delivery time 1-5 days, depending on the carrier

Tip
MSP 105 1-Wire Multisensor Pro Air Humidity and Temperature Sensor
Elegant multisensor for humidity and temperature Pro for 1-Wire bus systemfor professional applications, e.g. public institutions, authorities, machines etc. Highlights Professional Temperature and humidity sensor for private, schools, public buildings and companiesFull support for ESERA Plug and Play system (Auto-E-Connect)Universal surface mountingElegant and high quality sensor housingSimple power supply (5VDC) Function: With the MSP105 1-Wire Multisensor Pro for temperature and humidity, simple monitoring of the room climate is possible. The MSP105 has an attractive sensor housing (surface mounting). With the help of the air humidity sensor, the humidity conditions in the environment are monitored and a warning could be issued via the evaluation software about possible dangers due to mold growth. The MSP105 Multisensor Pro is an important sensor for heating and ventilation systems and is a main component of a single room control. In combination with 1-Wire switching modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated. Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with article number 11134.

From €59.31*

Product number: 11150

Available, delivery time 1-5 days, depending on the carrier