1-Wire Kabel für USB-Adapter DS9490

Product information "1-Wire Kabel für USB-Adapter DS9490"

Connecting cable RJ12 to RJ12 1.8m

The cable is for connecting two RJ12 1-Wire devices, such as a USB adapter and distributor.
Note that the two RJ12 connectors have a rotated pin assignment.
Further information about the cable pinout can be found in the download area

1-Wire Interface: Standard 1-Wire bus functions
Colour: black
Connection type:
  • Open cable ends
  • RJ11 / RJ12 connector / connection, 6-pin
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
Design / Manufacturer: ESERA
Execution: 3 pin connector
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP00
  • Protection class III
Length: approx. 1,8m
Mounting:
  • Cable sensor
  • Desktop, mobile application
Power supply, Supply Voltage: System supply, 5VDC (1-Wire main voltage)
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -5°C to +50°C, standard temperature range
Temperature range, storage: -5°C bis +50°C, Standard temperature range
Version: Basic Version / Basic Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials
1-Wire Adapter USB DS9490R
1-Wire Adapter USB, DS9490R USB adapter with 1-Wire interface. The adapter provides a quick and easy connection between the computer and the 1-Wire network. Individual 1-Wire sensors can be connected directly. For a network, a 1-Wire Hub or 1-Wire Hub II is recommended as the central power supply. Note: The assignment of the 1-Wire RJ11 socket is different to the 1-Wire cable sensors 11105 and 11106.To connect the 1-Wire adapter to the 1-Wire hub we recommend the adapter cable 11311. - High-Speed 12Mbps Universal Serial Bus (USB) Interface - Supports Standard and Overdrive 1-Wire Communication - Slew-Rate-Controlled 1-Wire Timing and Active Pullup for Improved 1-Wire Network Performance - DS9490R has an RJ11 interface for standard connection - Built-In Custom DS2401 Identification Chip - Reads all 1-Wire and iButton Devices. Writes All Except EPROM 1-Wire/iButton Devices Connection: USB (1.1) to RJ11 (1-Wire)Supply voltage: 5VDC1-Wire device: DS9490

From €39.51*

Product number: 11304

Available, delivery time 1-5 days, depending on the carrier

1-Wire Hub III DC, central power supply
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage. The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller. The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function: Central power supply of the 1-Wire network 1-Wire distribution for several bus sections LED display for power and 1-Wire activity Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.

From €70.11*

Product number: 11322

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 2 RJ12 passive
1-Wire distributor with 6 outputs RJ12 modular connectors Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling. Connection 1-Wire Bus Input push-in terminal* and RJ45 socket (connected in parallel) Assignment bus connection 5V, 12, Data and GND (connection RJ45 and push-in terminal) Connection temperature sensors 6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND) Operating voltage 3 - 5.5VDC Operating current max. 500mA Assembly Designed for top hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Available, delivery time 1-5 days, depending on the carrier