1-Wire distributor 4 star wiring with Push In terminals

Product information "1-Wire distributor 4 star wiring with Push In terminals"

1-Wire distributor for cabling of 1-Wire sensors in star or tree topology

6 outputs on push-in terminals* plus one RJ45 modular jack

Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables.

This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over.

You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.

The distributor complements the existing 1-Wire cabling system based on CAT patch cables.

*Push In terminals are screwless terminal connections.

1-Wire Interface:
  • Parasitic operation is not supported (2-wire operation without 5V power supply)
  • Standard 1-Wire bus functions
Colour:
  • green
  • white
Connection type:
  • Push In terminal block
  • RJ45 connector / connection, 8 pin
Data interface: Industrial 1-Wire Bus (12V, 5V, 1-Wire Data und Masse (GND))
Design / Manufacturer: ESERA
Dimensions: 40 x 112 x 24mm (BxWxT)
Enclosure: Open circuit board with ABS plastic base. Plastic with high percentage of recycled plastic, green (RAL 6020).
Function:
  • Accessories for sensors (outdoor)
  • Sensor Accessories (General)
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP00
  • Protection class III
Internal sensors:
  • Internal backup capacitor / buffer / abblock capacitor for stable operation, important for industrial use
  • no sensor
Mounting:
  • DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
  • Desktop, mobile application
Number of inputs / outputs:
  • 1 - channel output
  • 7 - channel input
Plug and Play support , Auto-E-Connect Support: Yes
Power supply, Supply Voltage:
  • System supply, 5VDC (1-Wire main voltage)
  • System supply, 12VDC (1-Wire auxiliary voltage)
Protection circuit:
  • Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use
  • Overvoltage protection for the voltage supply / power supply
  • Reverse polarity protection for voltage supply / power supply
Scope of delivery: Device and user manual
Software Version / Support: without software
Temperature range, operation: -25°C to +70°C, Extended temperature range 1, (E1)
Temperature range, storage: -25°C bis +70°C, Extended temperature range 1, (E1)
Version: Basic Version / Basic Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials
Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Note: If the device is not available, we recommend the new model, the ECO 10. Here you can find the ECO 10 controller. Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €152.91*

Product number: 11319

Available, delivery time 1-5 days, depending on the carrier

Tip
ECO 10 1-Wire Controller, intelligent system interface
ECO 10, 3rd generation 1-Wire controller, the intelligent system interface to all smart home controllers The ECO 10 1-Wire Controller represents a high performance 3rd generation 1-Wire interface for sensors and actuators. Key Features Fully automatic integration of sensors* and actuators* Auto-E-Connect Support Level I and II 1-Wire controller for autonomous communication and updating of the 1-Wire network. Fast readout of all up to 30 1-Wire sensors, actuators or chips in 1-3 second cycles Cyclic output of the processed 1-Wire data in 10 second intervals and in plain text Data communication via socket server/client, TCP or UDP Designed for small to large 1-Wire networks Power supply of the 1-Wire network with 5V voltage Top-hat rail housing for control cabinet installation Wide supply voltage range 9-30VDC Management of all ESERA sensors and actuators with suitable libraries and many standard 1-Wire modules and chips Extensive software for commissioning, configuration and analysis Whatever system you want to use, the ECO 10, the intelligent system interface, is ready for it. Do you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, FHEM, ..., no problem. All systems can access 1-Wire sensors and actuators via the ECO 10 1-Wire controller. The ECO 10 allows the automatic integration of all 1-Wire sensors* with Auto-E-Connect to all controllers such as PLC or PC systems without having special knowledge about the 1-Wire protocol. /* Style Definitions */ table.MsoNormalTable {mso-style-name: "NormalTable"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family: "Times New Roman",serif;}

From €175.41*

Product number: 11601-24

Available, delivery time 1-5 days, depending on the carrier

1-Wire Hub III DC, central power supply
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage. The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller. The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function: Central power supply of the 1-Wire network 1-Wire distribution for several bus sections LED display for power and 1-Wire activity Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.

From €70.11*

Product number: 11322

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €284.31*

Product number: 11604-24

Available, delivery time 1-5 days, depending on the carrier

ECO 208 1-Wire Controller Pro, Ethernet Interface, Digital Input, -48VDC Supply
System monitoring via ECO 208 ControllerVersion with -48VDC supplyExtremely powerful industrial 1-Wire controller with integrated digital input function for "Internet of Things" applications in the industrial environment.The ECO 208 is a professional IoT controller with digital inputs and industrial 1-Wire interface. It allows the direct polling of digital inputs, e.g. fault outputs of IT devices and the integration of 1-Wire sensors and actuators.The ECO 208 controller represents a high-performance sensor interface of the latest generation for system and infrastructure monitoring.Up to 30 sensors can be connected to the ECO 208 fully automatically via Industrial 1-Wire Bus and Auto-E-Connect Plug and Play system.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire Bus standard, has been registered as a German and European patent by ESERA GmbH.A wide range of sensors is available, such as for temperature, humidity, dew point, air quality (CO2, VOC or fine dust), digital alarm signalling contacts, glass breakage and smoke detectors. Each of the maximum 30 sensors can provide up to 5 data values. Thus, the ECO 608 controller can provide up to 150 sensor data to your control system.In addition to the sensor bus interface, the ECO 208 has 8 digital inputs for monitoring normally open contacts, such as alarm signaling or door contacts.The ECO 208 has a digital output (relay) for switching electrical loads or alarm signalling devices.Via the WLAN and LAN interface it is possible to communicate with up to 16 dynamic connections via Modbus/TCP, MQTTand ASCII text protocol.Configuration of the interfaces via web server.LAN interface for TCP/IP and UPD connectionsMax. 16 data connections via ASCII, Modbus/TCP or MQTTConnectable AcesspointRobust industrial designOLED displayplus additionally:8 x digital inputs for alarm contacts, door contact switches or other switches (normally open contacts)1 x digital output 10/230V for switching consumers or as alarm contact outputIndustrial 1-Wire bus with 5V supplyIntegrated power supply unit, power supply of the device with -48DC voltageThe 1-Wire interface is designed for the operation of small to large 1-Wire networksData interfaceLAN and WLAN Modbus/TCP, MQTT and ASCII text interface (ESERA Protocol) WLAN: 802.11 b/g, LAN 10/100MBit/s, up to16 dynamic and up to 5 static TCP connectionsOperating modesTCP/IP Server, DHCP or fixed IP-Address Auto NegotiationSensor Bus 1-Wire Industrial Bus1-Wire Bus system for parasitic or standard mode Support for ESERA Auto-E-Connect System, level 1 - 3Digital inputs8 x digital inputs for Alarm signaling contacts (normally open contacts, 5V working voltage)Internal Sensorstemperature measuring range -40 to + 85°C, accuracy +/- 0,3°C humidity, relative, measuring range 0-100%, accuracy 3%Power supply-42 to -70VDC, max. 5 watt at -48VDCConnectionscrewless terminals, Push In terminals, RJ45 socketDimensions90,5 x 106,3 x 62 mm (H x W x D)Housing colorlightgreyHousing materialABS plasticProtection system , Protection classIP20 / Protection class IITemperature, Operation-25°C to +70°C (Optional -40°C to +70°C)Humidity, Operation10-92%System clock (RTC)min. 24 hours RTC operation without mains voltageScope of deliveryDevice and quick start guide, operating instructions via download

From €469.71*

Product number: 11603-48

Available, delivery time 1-5 days, depending on the carrier

ECO 608 1-Wire Controller Pro, Ethernet Interface, Digital Input, 24VDC Supply
System monitoring via ECO 608 ControllerVersion with 24VDC supplyExtremely powerful industrial 1-Wire controller with integrated digital input function for "Internet of Things" applications in the industrial environment.The ECO 608 is a professional IoT controller with digital inputs and industrial 1-Wire interface. It allows the direct polling of digital inputs, e.g. fault outputs of IT devices and the integration of 1-Wire sensors and actuators.The ECO 608 controller represents a high-performance sensor interface of the latest generation for system and infrastructure monitoring.Up to 30 sensors can be connected to the ECO 608 fully automatically via Industrial 1-Wire Bus and Auto-E-Connect Plug and Play system.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire Bus standard, has been registered as a German and European patent by ESERA GmbH.A wide range of sensors is available, such as for temperature, humidity, dew point, air quality (CO2, VOC or fine dust), digital alarm signalling contacts, glass breakage and smoke detectors. Each of the maximum 30 sensors can provide up to 5 data values. Thus, the ECO 608 controller can provide up to 150 sensor data to your control system.In addition to the sensor bus interface, the ECO 608 has 8 digital inputs for monitoring normally open contacts, such as alarm signaling or door contacts.The ECO 608 has a digital output (relay) for switching electrical loads or alarm signalling devices.Via the WLAN and LAN interface it is possible to communicate with up to 16 dynamic connections via Modbus/TCP, MQTTand ASCII text protocol.Configuration of the interfaces via web server.LAN interface for TCP/IP and UPD connectionsMax. 16 data connections via ASCII, Modbus/TCP or MQTTConnectable AcesspointRobust industrial designOLED displayplus additionally:8 x digital inputs for alarm contacts, door contact switches or other switches (normally open contacts)1 x digital output 10/230V for switching consumers or as alarm contact outputIndustrial 1-Wire bus with 5V supplyIntegrated power supply unit, power supply of the device with 110 and 230VAC DC voltageThe 1-Wire interface is designed for the operation of small to large 1-Wire networksData interfaceLAN and WLAN Modbus/TCP, MQTT and ASCII text interface (ESERA Protocol) WLAN: 802.11 b/g, LAN 10/100MBit/s, up to16 dynamic and up to 5 static TCP connectionsOperating modesTCP/IP Server, DHCP or fixed IP-Address Auto NegotiationSensor Bus 1-Wire Industrial Bus1-Wire Bus system for parasitic or standard mode Support for ESERA Auto-E-Connect System, level 1 - 3Digital inputs8 x digital inputs for Alarm signaling contacts (normally open contacts, 5V working voltage)Internal Sensorstemperature measuring range -40 to + 85°C, accuracy +/- 0,3°C humidity, relative, measuring range 0-100%, accuracy 3%Power supply9 to 30VDC, max. 5 watt at 24VDCConnectionscrewless terminals, Push In terminals, RJ45 socketDimensions90,5 x 106,3 x 62 mm (H x W x D)Housing colorlightgreyHousing materialABS plasticProtection system , Protection classIP20 / Protection class IITemperature, Operation-25°C to +70°C (Optional -40°C to +70°C)Humidity, Operation10-92%System clock (RTC)min. 24 hours RTC operation without mains voltageScope of deliveryDevice and quick start guide, operating instructions via download

From €494.91*

Product number: 11605-24

Available, delivery time 1-5 days, depending on the carrier

ECO 608 1-Wire Controller Pro, Ethernet Interface, Digital Input, 230V Supply
System monitoring via ECO 608 ControllerVersion with 100-230VAC supplyExtremely powerful industrial 1-Wire controller with integrated digital input function for "Internet of Things" applications in the industrial environment.The ECO 608 is a professional IoT controller with digital inputs and industrial 1-Wire interface. It allows the direct polling of digital inputs, e.g. fault outputs of IT devices and the integration of 1-Wire sensors and actuators.The ECO 608 controller represents a high-performance sensor interface of the latest generation for system and infrastructure monitoring.Up to 30 sensors can be connected to the ECO 608 fully automatically via Industrial 1-Wire Bus and Auto-E-Connect Plug and Play system.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire Bus standard, has been registered as a German and European patent by ESERA GmbH.A wide range of sensors is available, such as for temperature, humidity, dew point, air quality (CO2, VOC or fine dust), digital alarm signalling contacts, glass breakage and smoke detectors. Each of the maximum 30 sensors can provide up to 5 data values. Thus, the ECO 608 controller can provide up to 150 sensor data to your control system.In addition to the sensor bus interface, the ECO 608 has 8 digital inputs for monitoring normally open contacts, such as alarm signaling or door contacts.The ECO 608 has a digital output (relay) for switching electrical loads or alarm signalling devices.Via the WLAN and LAN interface it is possible to communicate with up to 16 dynamic connections via Modbus/TCP, MQTTand ASCII text protocol.Configuration of the interfaces via web server.LAN interface for TCP/IP and UPD connectionsMax. 16 data connections via ASCII, Modbus/TCP or MQTTConnectable AcesspointRobust industrial designOLED displayplus additionally:8 x digital inputs for alarm contacts, door contact switches or other switches (normally open contacts)1 x digital output 10/230V for switching consumers or as alarm contact outputIndustrial 1-Wire bus with 5V supplyIntegrated power supply unit, power supply of the device with 110 and 230VAC DC voltageThe 1-Wire interface is designed for the operation of small to large 1-Wire networksData interfaceLAN and WLAN Modbus/TCP, MQTT and ASCII text interface (ESERA Protocol) WLAN: 802.11 b/g, LAN 10/100MBit/s, up to16 dynamic and up to 5 static TCP connectionsOperating modesTCP/IP Server, DHCP or fixed IP-Address Auto NegotiationSensor Bus 1-Wire Industrial Bus1-Wire Bus system for parasitic or standard mode Support for ESERA Auto-E-Connect System, level 1 - 3Digital inputs8 x digital inputs for Alarm signaling contacts (normally open contacts, 5V working voltage)Internal Sensorstemperature measuring range -40 to + 85°C, accuracy +/- 0,3°C humidity, relative, measuring range 0-100%, accuracy 3%Power supply100 to 240VAC, max. 5 watt at 230VACConnectionscrewless terminals, Push In terminals, RJ45 socketDimensions90,5 x 106,3 x 62 mm (H x W x D)Housing colorlightgreyHousing materialABS plasticProtection system , Protection classIP20 / Protection class IITemperature, Operation-25°C to +70°C (Optional -40°C to +70°C)Humidity, Operation10-92%System clock (RTC)min. 24 hours RTC operation without mains voltageScope of deliveryDevice and quick start guide, operating instructions via download

From €503.91*

Product number: 11605-230

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 1 RJ45 passive
Passive 1-Wire distributor with 6 outputs on RJ45 modular connectors Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-wire cabling system based on network cables. This enables fast and cost-sensitive cabling. Connections 6 x RJ45 sockets with 1-Wire standard assignment 12V, 5V, Data and GND (sockets connected in parallel) Pressure connection terminal for connection to 1-wire hub or 1-wire bus coupler/1-wire controller Assembly top-hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions

From €28.71*

Product number: 11140

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 2 RJ12 passive
1-Wire distributor with 6 outputs RJ12 modular connectors Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling. Connection 1-Wire Bus Input push-in terminal* and RJ45 socket (connected in parallel) Assignment bus connection 5V, 12, Data and GND (connection RJ45 and push-in terminal) Connection temperature sensors 6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND) Operating voltage 3 - 5.5VDC Operating current max. 500mA Assembly Designed for top hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Available, delivery time 1-5 days, depending on the carrier

1-Wire Adapter 2, RJ45 to screw terminal
The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors. The adapter has a RJ45 connector on one side and a Push In terminal for ground, 5V, 12V and 1-Wire data on the other side. It is no longer necessary to remove the existing network connectors. The pin assignment of the RJ45 socket is matched to our 1-Wire Hub RJ45.

From €8.01*

Product number: 11124

Available, delivery time 1-5 days, depending on the carrier

1-Wire Adapter 1, RJ12 to Push In Terminal Adapter
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €14.31*

Product number: 11348

Available, delivery time 1-5 days, depending on the carrier

1-Wire Adapter 1, RJ12 to Push In Terminal Adapter
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €8.91*

Product number: 11118

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

MS105 1-Wire Multisensor temperature, humidity living room flush-mounted for Berker, Jung, Merten Kopie
MS105 1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.

Variants from €59.31*
From €48.52*

Product number: 11132

Available, delivery time 1-5 days, depending on the carrier

1-Wire Multisensor Pro temperature, humidity living room flush-mounted for Berker, Jung, Merten
1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.

Variants from €59.31*
From €69.21*

Product number: 11160-3

Available, delivery time 1-5 days, depending on the carrier

Tip
MSP 105 1-Wire Multisensor Pro Air Humidity and Temperature Sensor
Elegant multisensor for humidity and temperature Pro for 1-Wire bus systemfor professional applications, e.g. public institutions, authorities, machines etc. Highlights Professional Temperature and humidity sensor for private, schools, public buildings and companiesFull support for ESERA Plug and Play system (Auto-E-Connect)Universal surface mountingElegant and high quality sensor housingSimple power supply (5VDC) Function: With the MSP105 1-Wire Multisensor Pro for temperature and humidity, simple monitoring of the room climate is possible. The MSP105 has an attractive sensor housing (surface mounting). With the help of the air humidity sensor, the humidity conditions in the environment are monitored and a warning could be issued via the evaluation software about possible dangers due to mold growth. The MSP105 Multisensor Pro is an important sensor for heating and ventilation systems and is a main component of a single room control. In combination with 1-Wire switching modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated. Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with article number 11134.

From €59.31*

Product number: 11150

Available, delivery time 1-5 days, depending on the carrier