Leak detector Water detector 12V

Quantity Unit price
1 to 49
50 to 99
From 100
Product number: 20005
EAN: 0098931699653
Manufacturer product ID: 20005
Product information "Leak detector Water detector 12V"

Prepared for the next flood!

Leakage sensor / water detector to protect against water damage

The leakage sensor reliably detects moisture or water on the floor.
The sensor itself is housed in a waterproof housing, so it can "survive" without damage even at higher water levels.
The leakage detector can be integrated into a 1-Wire network in combination with our 1-Wire Switch Input Module Art.No. 11214  (not included) .
The module can be supplied with 12V voltage from a 1-Wire hub.

The switching polarity and sensitivity is adjustable. Typical applications are the detection of liquids due to defective water pipes, defective washing or dishwashing machines and flooding.
The relay contact closes when moisture is detected.

Measuring method:    Electrolytic AC voltage measurement
Evaluation:                    relay  contact (active open or closed)
Power supply:              12V AC or DC (+/-10%)  /
relay contact:                max. 30V / 4A
Dimensions:                  80 x 82 x 58mm
Scope of delivery:        sensor, operating instructions

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials


HDR15-12 DIN rail power supply 12V 15W black
DIN rail power supply 115/230V according to 12V 15Wl Meanwell HDR series Energy-saving narrow low-power power supply unit for supplying ESERA devices, such as 1-Wire Bus Coupler Serial (TTL) 11302-T 1-Wire Bus Coupler Serial (RS232) 11302-R 1-Wire Bus Coupler Pro USB 11302-U 1-Wire bus coupler Ethernet Controller 1 Ethernet 11319 Gateway 10 and Gateway 11 ... - Space-saving and narrow DIN rail unit - Mains input voltage with wide range input - Short circuit and overload protection - Insulation class 2 (protection class 2)

From €15.21*

Product number: 61117

1-Wire 8-fold digital input 10-30V
Application With the 8-fold digital input module the status of 8 switches, reed contacts or all kinds of digital sensors can be queried.The status of the switch inputs is displayed via the LED indicators on the front panel.When the input voltage is present, the respective LED indicator lights up.AdvantageYou can acquire 8 digital signals via one moduleVia manual keys you can simulate an input status without the input being connected. This is very helpful during commissioning or maintenance.Per ESERA extended Plug and Play system, called "Auto-E-Connect", the 8-fold digital input EDIN 800 is installed fully automatic in ECO Controller easy and fast.Features Interference resistant: To further protect the inputs against interference, the module has filters with a delay of only 30ms.Storage: Even short changes of the input signals are stored. So no signal or pulse can be lost between the reading cycle.Manual function: Each input can be set manually by push button for test purposes, maintenance or development.Isolation : The inputs are isolated from the 1-Wire network by optocouplers. This allows very long connection cables between the module and the sensors without interfering with the 1-Wire bus. In addition, the isolation between switch inputs and 1-Wire network provides increased safety.For the operation of the module we recommend the use of one of our 1-Wire Hub modules.Number of inputs8Input voltageLow: 0-5V High: 10-30VDC, (common negative)Input currentmax. 5mA per channel at 24VDC1-Wire Plug and Play System,Auto-E-Connect FeaturePre Configuration: Wish OWD storage Automatic Positioning: OWD enhanced Plug And Play Sensorfinder Function: LED display for sensor detection Classes Assignment: OWD class via ECO ControllerBus Interface1-Wire Industrial Bus with ESERA Auto-E-Connect System, Level I - III 5V, Data In, Data Out, Ground/GND and Ground (Earth, Functional Ground)Data interfaceIndustrial 1-Wire Bus (12V, Data and Ground), DS2808 command setLED indicators10 LEDs (Power LED, Status LED, 8 x Input) Input LED lights up at status high of the 1-Wire DS2408 interfaceIsolationmin. 500VAC against 1-Wire busOperating voltage12VDC, max. 40mA, all inputs activePower consumptionmax. 0.5W, all inputs activeConnectionscrew terminals (up to 2,5qmm cable cross section)Dimensions32 x 90 x 70mm (WxHxD), 2TE top hat rail housingInstallationIntended for switch cabinet installation (top-hat rail)HousingABS plastic with high percentage of used plasticGreen(RAL 6020)Temperature, operation-10°C to +50°CHumidity, operation10-92%, non-condensingScope of deliveryDevice and quick guide, operating instructions as download

From €80.91*

Product number: 11216

ESI 400 4-fold push button interface, 4 channel switch input
With the ESI 400 4 Channel Switch Input Module, push buttons, switches or reed contacts can be (magnetic switch) can be interrogated. For example, the status of doors, windows, roof windows, fire dampers or a garage door can be recorded. A reed switch is only to be attached at a suitable place and connected to the ESI 400 module. The Status LED flashes when the status of one of the inputs has changed. Even short switching pulses, e.g. from buttons, are detected by the ESI 400 4-Channel Switch Input Module and stored until the next readout cycle.The ESI 400 module can be connected directly to switches or buttons. No external voltage is required for the switches. The ESI 400 module can be supplied with 5V - 12V operating voltage. Function 4 digital inputs for querying push-button or switch No external voltage for buttons or switches necessary Short keystrokes are also stored until the next readout cycle Digital inputs with filters for "calmed" buttons / switch queries Very small housing, intended for installation in flush boxes number of inputs 4 digital inputs for push-button or switch pulse duration at least 40ms Operating voltage Pushbutton / switch approx. 5V DC voltage with approx. 1mA current inputs are connected to the ground potential of the operating voltage (bus interface) Connection length inputs Cable length per input max. 20m Bus interface 1-Wire bus, interface with DS2408 command setThe data line operates with typ. 5V voltage Operating voltage 5 - 12V DC voltage (+/-10%) with max. 20mA current consumption Display LED display for power and status change of the inputs Connection Screw terminals 0,2 - 1,5qmm Cable cross section Dimensions 43 x 43 x 25mm (LxWxH), optimized for installation in flush boxes Protection class / IP class Protection class III, IP20 Scope of delivery Device and operating instructions in German, English Manual via download

From €49.41*

Product number: 11235