1-Wire Gateway 20 Modbus TCP

1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

ECO 120 1-Wire controller desktop device, the intelligent system interface for the desktop Whatever system you want to use, the ECO 120 - the intelligent system and programming interface for 1-Wire bus sensors and actuators is ready for it. Do you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 100). The ECO120 controller allows the integration of all 1-Wire sensors to all controllers like PLC or PC systems without special knowledge about the 1-Wire protocol. The 1-Wire Controller 100 represents the autonomous management of 1-Wire sensors and 1-Wire actuators (e.g. switching modules) of a 1-Wire network. It recognizes new 1-Wire sensors/actuators independently and cyclically supplies the tested values adapted to the sensor. The output is ready formatted as ASCII characters via the computer interface to your controller. You receive e.g. from temperature sensors the temperature in C° plain writing delivered. The device has extensive configuration and formatting possibilities, which can be read out and operated via ESERA Config-Tool 3 or via terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode in 1-2 second intervals. The 1-Wire interface is designed for operation for all sizes of a 1-Wire network.

ECO 10, 3rd generation 1-Wire controller, the intelligent system interface to all smart home controllers The ECO 10 1-Wire Controller represents a high performance 3rd generation 1-Wire interface for sensors and actuators. Key Features Fully automatic integration of sensors* and actuators* Auto-E-Connect Support Level I and II 1-Wire controller for autonomous communication and updating of the 1-Wire network. Fast readout of all up to 30 1-Wire sensors, actuators or chips in 1-3 second cycles Cyclic output of the processed 1-Wire data in 10 second intervals and in plain text Data communication via socket server/client, TCP or UDP Designed for small to large 1-Wire networks Power supply of the 1-Wire network with 5V voltage Top-hat rail housing for control cabinet installation Wide supply voltage range 9-30VDC Management of all ESERA sensors and actuators with suitable libraries and many standard 1-Wire modules and chips Extensive software for commissioning, configuration and analysis Whatever system you want to use, the ECO 10, the intelligent system interface, is ready for it. Do you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, FHEM, ..., no problem. All systems can access 1-Wire sensors and actuators via the ECO 10 1-Wire controller. The ECO 10 allows the automatic integration of all 1-Wire sensors* with Auto-E-Connect to all controllers such as PLC or PC systems without having special knowledge about the 1-Wire protocol. /* Style Definitions */ table.MsoNormalTable {mso-style-name: "NormalTable"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family: "Times New Roman",serif;}

System monitoring via ECO 608 ControllerVersion with 100-230VAC supplyExtremely powerful industrial 1-Wire controller with integrated digital input function for "Internet of Things" applications in the industrial environment.The ECO 608 is a professional IoT controller with digital inputs and industrial 1-Wire interface. It allows the direct polling of digital inputs, e.g. fault outputs of IT devices and the integration of 1-Wire sensors and actuators.The ECO 608 controller represents a high-performance sensor interface of the latest generation for system and infrastructure monitoring.Up to 30 sensors can be connected to the ECO 608 fully automatically via Industrial 1-Wire Bus and Auto-E-Connect Plug and Play system.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire Bus standard, has been registered as a German and European patent by ESERA GmbH.A wide range of sensors is available, such as for temperature, humidity, dew point, air quality (CO2, VOC or fine dust), digital alarm signalling contacts, glass breakage and smoke detectors. Each of the maximum 30 sensors can provide up to 5 data values. Thus, the ECO 608 controller can provide up to 150 sensor data to your control system.In addition to the sensor bus interface, the ECO 608 has 8 digital inputs for monitoring normally open contacts, such as alarm signaling or door contacts.The ECO 608 has a digital output (relay) for switching electrical loads or alarm signalling devices.Via the WLAN and LAN interface it is possible to communicate with up to 16 dynamic connections via Modbus/TCP, MQTTand ASCII text protocol.Configuration of the interfaces via web server.LAN interface for TCP/IP and UPD connectionsMax. 16 data connections via ASCII, Modbus/TCP or MQTTConnectable AcesspointRobust industrial designOLED displayplus additionally:8 x digital inputs for alarm contacts, door contact switches or other switches (normally open contacts)1 x digital output 10/230V for switching consumers or as alarm contact outputIndustrial 1-Wire bus with 5V supplyIntegrated power supply unit, power supply of the device with 110 and 230VAC DC voltageThe 1-Wire interface is designed for the operation of small to large 1-Wire networksData interfaceLAN and WLAN Modbus/TCP, MQTT and ASCII text interface (ESERA Protocol) WLAN: 802.11 b/g, LAN 10/100MBit/s, up to16 dynamic and up to 5 static TCP connectionsOperating modesTCP/IP Server, DHCP or fixed IP-Address Auto NegotiationSensor Bus 1-Wire Industrial Bus1-Wire Bus system for parasitic or standard mode Support for ESERA Auto-E-Connect System, level 1 - 3Digital inputs8 x digital inputs for Alarm signaling contacts (normally open contacts, 5V working voltage)Internal Sensorstemperature measuring range -40 to + 85°C, accuracy +/- 0,3°C humidity, relative, measuring range 0-100%, accuracy 3%Power supply100 to 240VAC, max. 5 watt at 230VACConnectionscrewless terminals, Push In terminals, RJ45 socketDimensions90,5 x 106,3 x 62 mm (H x W x D)Housing colorlightgreyHousing materialABS plasticProtection system , Protection classIP20 / Protection class IITemperature, Operation-25°C to +70°C (Optional -40°C to +70°C)Humidity, Operation10-92%System clock (RTC)min. 24 hours RTC operation without mains voltageScope of deliveryDevice and quick start guide, operating instructions via download

System monitoring via ECO 608 ControllerVersion with 24VDC supplyExtremely powerful industrial 1-Wire controller with integrated digital input function for "Internet of Things" applications in the industrial environment.The ECO 608 is a professional IoT controller with digital inputs and industrial 1-Wire interface. It allows the direct polling of digital inputs, e.g. fault outputs of IT devices and the integration of 1-Wire sensors and actuators.The ECO 608 controller represents a high-performance sensor interface of the latest generation for system and infrastructure monitoring.Up to 30 sensors can be connected to the ECO 608 fully automatically via Industrial 1-Wire Bus and Auto-E-Connect Plug and Play system.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire Bus standard, has been registered as a German and European patent by ESERA GmbH.A wide range of sensors is available, such as for temperature, humidity, dew point, air quality (CO2, VOC or fine dust), digital alarm signalling contacts, glass breakage and smoke detectors. Each of the maximum 30 sensors can provide up to 5 data values. Thus, the ECO 608 controller can provide up to 150 sensor data to your control system.In addition to the sensor bus interface, the ECO 608 has 8 digital inputs for monitoring normally open contacts, such as alarm signaling or door contacts.The ECO 608 has a digital output (relay) for switching electrical loads or alarm signalling devices.Via the WLAN and LAN interface it is possible to communicate with up to 16 dynamic connections via Modbus/TCP, MQTTand ASCII text protocol.Configuration of the interfaces via web server.LAN interface for TCP/IP and UPD connectionsMax. 16 data connections via ASCII, Modbus/TCP or MQTTConnectable AcesspointRobust industrial designOLED displayplus additionally:8 x digital inputs for alarm contacts, door contact switches or other switches (normally open contacts)1 x digital output 10/230V for switching consumers or as alarm contact outputIndustrial 1-Wire bus with 5V supplyIntegrated power supply unit, power supply of the device with 110 and 230VAC DC voltageThe 1-Wire interface is designed for the operation of small to large 1-Wire networksData interfaceLAN and WLAN Modbus/TCP, MQTT and ASCII text interface (ESERA Protocol) WLAN: 802.11 b/g, LAN 10/100MBit/s, up to16 dynamic and up to 5 static TCP connectionsOperating modesTCP/IP Server, DHCP or fixed IP-Address Auto NegotiationSensor Bus 1-Wire Industrial Bus1-Wire Bus system for parasitic or standard mode Support for ESERA Auto-E-Connect System, level 1 - 3Digital inputs8 x digital inputs for Alarm signaling contacts (normally open contacts, 5V working voltage)Internal Sensorstemperature measuring range -40 to + 85°C, accuracy +/- 0,3°C humidity, relative, measuring range 0-100%, accuracy 3%Power supply9 to 30VDC, max. 5 watt at 24VDCConnectionscrewless terminals, Push In terminals, RJ45 socketDimensions90,5 x 106,3 x 62 mm (H x W x D)Housing colorlightgreyHousing materialABS plasticProtection system , Protection classIP20 / Protection class IITemperature, Operation-25°C to +70°C (Optional -40°C to +70°C)Humidity, Operation10-92%System clock (RTC)min. 24 hours RTC operation without mains voltageScope of deliveryDevice and quick start guide, operating instructions via download