Wall bracket for wind sensor Pro 100

Quantity Unit price
1 to 49
€18.90*
50 to 99
€17.96*
From 100
€17.01*

Available, delivery time 1-5 days, depending on the carrier

Product number: 20011
EAN: 0098931698892
Manufacturer product ID: 20011
Product information "Wall bracket for wind sensor Pro 100"

Wall bracket for wind sensor Pro 100

With this holder you can fix the wind sensor Pro 100 to walls or even to a mast in a stable way.
All screws are made of weather-resistant stainless steel and are therefore suitable for professional use in weather stations.

The holder is made of aluminium and is supplied with a stainless steel mast clamp and is therefore suitable for professional use in weather stations.

 

Application

  • Wall bracket for wind sensor Pro 100

Assembly

  • Mounting via 6M screw connection
  • Wall or pole mount bracket

Dimensions

approx. 210 mm x 80mm (length x width)

Accessories

Pole mount, wall bracket

Scope of delivery

Wind sensor without mounting bracket

Colour: gray
Design / Manufacturer: ESERA
Enclosure: Aluminium. Alu
Function:
  • Environmental sensors
  • Sensor Accessories (General)
Measurement values:
  • Wind
  • Wind speed
Mounting:
  • Outdoor / weather-protected area
  • Roof mounting
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -25°C to +70°C, Extended temperature range 1, (E1)
Temperature range, storage: -25°C bis +70°C, Extended temperature range 1, (E1)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

Tip
1-Wire Dual S0 counter module PRO
The 1-Wire S0 Meter Pro is designed for energy metering of two independent electricity, water and gas meters or the wind turbine. All S0 energy meters manufactured according to DIN 43864 can be reliably measured. Due to the high-quality electronics of the 1-Wire S0 Meter Pro, energy meters can also be reliably recorded with very high pulse frequencies of up to 300 Hz. The S0 meter values are made available via a 1-Wire bus interface. In the event of a power failure, the S0 meter values are permanently stored internally for at least 99 years. Inputs 2 x S0 pulse input (counter) for 2 energy meters or wind sensor Supply voltage 12V 1-Wire Bus Power consumption 10mA, both inputs active S0 Interface 10V and approx. 4mA working level, according to DIN 43864 Counter range / scope 32 bit counter per S0 input Data preservation / storage Permanent storage of meter values for up to 99 years in the event of a power failure Data interface 1-Wire Interface, DS2423 command set (GND, Data and 12V) Operating voltage 12VDC (+10% / -20%) Power consumption max. 10mA Operating frequency S0 Input max. 300Hz Connection Screw terminals for 1-Wire bus and S0 inputs up to 2,5qmm cable cross section Dimensions 1HP, 17 x 71x 90mm (WxHxD) Protection class III Note The counter value can be reset via push button on the front panel Installation Designed for control cabinet installation (top hat rail) Scope of delivery Finished device and operating instructions

From €59.31*

Product number: 11211

Available, delivery time 1-5 days, depending on the carrier

Windsensor Pro 100, Windturbine
Wind sensor Pro 100The compact and professional Wind sensor Pro 100 can record the current wind speed and, e.g. in the event of gusts of wind, provide information via the system control for retracting an awning or raising roller shutters or slats. The Wind sensor Pro 100 is an optimal environmental sensor for recording wind speed for weather recording.All bearings and screws are made of weather-resistant stainless steel and are therefore suitable for professional use in weather stations. Via the S0 interface pulses are output depending on the wind speed. One pulse is emitted per revolution. The Wind sensor Pro 100 has a pulse output and is intended for connection to the 1-Wire S0 counter module (Art. No. 11211). It is weatherproof and has an approx. 2 meter long connection cable. A mast holder, wall bracket and mounting masts are available as accessories. Application Protection of awnings, roller shutters and slats from gusts of wind Recording the wind speed for weather data acquisition Assembly Mounting via M6 screw connection Wall or pole mount bracket Measuring range 0 - 40m/s (0 - 160 Km/s) Interface S0 interface (reed contact, normally open contact) 1 pulses per revolution 1 pulse corresponds to 0.5m/s Electr. values max. 30V, max. 20mA Connection / Cable approx. 2m cable Evaluation Pulse output for 1-Wire S0 counter 11211 Dimensions approx. 210 mm x 80mm (height x width)Wind turbine Ø 160 mm Accessories Pole mount, wall bracket Scope of delivery Wind sensor without mounting bracket

From €79.11*

Product number: 20010

Available, delivery time 1-5 days, depending on the carrier

Related products

Wind sensor Pro 200, wind turbine
Wind sensor Pro 200 with heating With the compact and professional wind sensor Pro 200, the current wind speed can be recorded and, e.g. in the event of gusts of wind, it can provide information via the system control for retracting an awning or raising roller shutters or slats. The wind sensor Pro 200 is an optimal environmental sensor for recording wind speed for weather recording. For operation in winter the wind sensor Pro 200 is equipped with a heater. This prevents icing and thus a failure of the wind sensor. All bearings and screws are made of weather-resistant stainless steel and are therefore suitable for professional use in weather stations. Via the S0 interface (pulse output) pulses are output depending on the wind speed. 4 pulses are emitted per revolution. The wind sensor Pro 200 has a pulse output and is designed for connection to the 1-Wire Dual S0 counter module (Art. No. 11211). It is weatherproof and has an approx. 3 meter long connection cable. A mast holder, wall bracket and mounting masts are available as accessories. Application Protection of awnings, roller shutters and blinds / slats by gusts of wind Recording of the wind speed for weather data acquisition Assembly Mounting on 50mm mast (antenna mast) Wall or roof bracket Flat roof mast Cable length max. 10m to S0 counter Measuring range 0 - 50m/s (0 - 180 Km/s) Output signal sensor 4 pulses per m/s Electrical values Heating: 24 V AC or DC approx. 0.15W S0 interface (reed contact, normally open contact) 4 pulses per revolution 1 pulse corresponds to 0.25m/s Connection approx. 3m cable, 4-wire Evaluation Pulse output e.g. for 1-Wire S0 counter 11211 See connection example (Download) Dimensions approx. 210 mm x 80mm (height x width) Wind turbine Ø 160 mm Accessories Pole mount, wall bracket, pole for flat roof Scope of delivery Wind sensor without mounting bracket

From €147.51*

Product number: 20020

Available, delivery time 1-5 days, depending on the carrier

Sensor holder for mast
Sensor holder for mast mounting with clamp Mounting set for rain detector or 1-Wire solar brightness and temperature sensor Mast mounting (1/2' tube) Optimum drip angle Corrosion resistant aluminium Simple and stable construction Application pole mounting for - rain sensor or - 1-Wire solar, brightness and temperature sensor Material Aluminium, 2 mm Drainage angle 45 ° Scope of delivery Mast clamps, screws and dowels Without sensors

From €16.11*

Product number: 20030

Available, delivery time 1-5 days, depending on the carrier