1-Wire distributor 2 RJ12 passive

Quantity Unit price
1 to 49
€30.90*
50 to 99
€29.36*
From 100
€27.81*

Available, delivery time 1-5 days, depending on the carrier

Product number: 11141
EAN: 0782321213580
Manufacturer product ID: 11141
Product information "1-Wire distributor 2 RJ12 passive"

1-Wire distributor with 6 outputs RJ12 modular connectors

Distribution module for 1-Wire temperature cable sensors with RJ12 connector.
The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling.

Connection 1-Wire Bus

Input push-in terminal* and RJ45 socket (connected in parallel)

Assignment bus connection

5V, 12, Data and GND (connection RJ45 and push-in terminal)

Connection temperature sensors

6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel)
Output: 5V, Data and ground (GND)

Operating voltage

3 - 5.5VDC

Operating current

max. 500mA

Assembly

Designed for top hat rail

Miscellaneous

Internal filtering of the power supply

Scope of delivery

Distributor and operating instructions

*Push In terminals are screwless terminal connections.

1-Wire Interface:
  • Parasitic operation is supported (2-wire operation without 5V power supply)
  • Standard 1-Wire bus functions
Colour:
  • green
  • white
Connection type:
  • Push In terminal block
  • RJ11 / RJ12 connector / connection, 6-pin
  • RJ45 connector / connection, 8 pin
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
Design / Manufacturer: ESERA
Dimensions: 40 x 112 x 24mm (BxWxT)
Enclosure: Open circuit board with ABS plastic base. Plastic with high percentage of recycled plastic, green (RAL 6020).
Execution: 3 pin connector
Function:
  • Accessories for sensors (outdoor)
  • Sensor Accessories (General)
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP00
  • Protection class III
Internal sensors: no sensor
Mounting:
  • DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
  • Desktop, mobile application
Number of inputs / outputs:
  • 1 - channel output
  • 6 - channel input
Plug and Play support , Auto-E-Connect Support: Yes
Power supply, Supply Voltage:
  • System supply, 5VDC (1-Wire main voltage)
  • System supply, 12VDC (1-Wire auxiliary voltage)
Protection circuit:
  • Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use
  • Overvoltage protection for the voltage supply / power supply
  • Reverse polarity protection for voltage supply / power supply
Scope of delivery: Device and user manual
Software Version / Support: without software
Temperature range, operation: -25°C to +70°C, Extended temperature range 1, (E1)
Temperature range, storage: -25°C bis +70°C, Extended temperature range 1, (E1)
Version: Basic Version / Basic Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

Temperature sensor Pro M10 screw-in cable
Professional high-quality 1-Wire Temperature sensor in M10 screw-in sleeve with shielded, oil-resistant PUR connection cable and RJ 12 plug. The sensor can be operated permanently outdoors and in all environments within a temperature range of -40 to +125 °C. The probes are suitable for permanent use in water.The sensors are manufactured in Germany in high quality. Application example: - Temperature measurement of hot water storage tanks- Installation on heating pipes (e.g. flow and return temperature)- Temperature measurement of outdoor pools, swimming pools and ponds- Suitable for temperature measurement in harsh and conditionally aggressive environmentsTo connect the Temperature sensors we recommend the 1-Wire Adapter 1 or a 1-Wire Extention5 Distributor. The Temperature sensor can be integrated directly at one of our 1-Wire bus couplers or via a 1-Wire hub into the 1-Wire network.Note: The sensor cannot be NOT connected directly to the 1-Wire USB adapter, because of different pin assignments.

From €33.88*

Product number: 11107

Available, delivery time 1-5 days, depending on the carrier

Related products

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 1 RJ45 passive
Passive 1-Wire distributor with 6 outputs on RJ45 modular connectors Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-wire cabling system based on network cables. This enables fast and cost-sensitive cabling. Connections 6 x RJ45 sockets with 1-Wire standard assignment 12V, 5V, Data and GND (sockets connected in parallel) Pressure connection terminal for connection to 1-wire hub or 1-wire bus coupler/1-wire controller Assembly top-hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions

From €28.71*

Product number: 11140

Available, delivery time 1-5 days, depending on the carrier

1-Wire Adapter 1, RJ12 to Push In Terminal Adapter
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €8.91*

Product number: 11118

Available, delivery time 1-5 days, depending on the carrier

1-Wire Adapter 1, RJ12 to Push In Terminal Adapter
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.

From €14.31*

Product number: 11348

Available, delivery time 1-5 days, depending on the carrier