Temperature sensor flush-mounted for Busch-Jaeger

Quantity Unit price
1 to 49
€21.90*
50 to 99
€20.81*
From 100
€19.71*
Central plate / covers / panels
Product number: 11130
EAN: 0782321213535
Manufacturer product ID: 11130
Product information "Temperature sensor flush-mounted for Busch-Jaeger"

Temperature flush-mounted sensor for switch ranges of the manufacturer Busch-Jaeger

Living room sensor for precise temperature measurement in buildings, specially adapted to the switch ranges of the manufacturer Busch-Jaeger.
With this sensor, a shapely integration of a high-precision temperature sensor into the very widespread switch ranges from Busch-Jaeger is possible.

  • Optimum integration into Busch-Jaeger switch ranges
  • Connection by screw terminal
  • Blocking capacitor integrated for reliable operation even on longer connection cables
  • High-precision sensor element for the 1-Wire bus
  • Power supply via 2-wire (parasitic mode) or 3-wire system (ground,1-Wire +5V)

Matching panels can be ordered in white or Alpine white. If we do not have the right cover for your Busch-Jaeger system in our range, please ask us.

Temperature sensor

DS18B20

Accuracy

+/- 0,5° in the range of -10°C - 85°C

Resolution

9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution

1-Wire connection

2 or 3-wire connection (data, ground and 5V, parasitic operation possible)

Operating voltage

3 - 5,5V=

Power consumption

approx. 1mA

Connection:

Screw terminal

Dimensions (outside)

68x68x12mm (LxWxH)

Scope of delivery

Sensor element and operating instructions
Cover, frame can be ordered as well. Flush-mounted box is not included

Busch-Jaeger is a trademark of Busch-Jaeger Elektro GmbH, Freisenbergstraße 2, 58513 Lüdenscheid and its respective owners.

1-Wire Interface:
  • DS18B20 Temperature Chip
  • Parasitic operation is not supported (2-wire operation without 5V power supply)
  • Standard 1-Wire bus functions
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
Colour: green
Connection type: Push In terminal block
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
Design / Manufacturer:
  • Busch-Jaeger
  • ESERA
Enclosure: Open housing, open assembly / printed circuit board
Execution: 3 pin connector
Function:
  • Sensoric
  • Temperature sensor
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP20
  • Protection class III
Internal sensors:
  • Internal backup capacitor / buffer / abblock capacitor for stable operation, important for industrial use
  • Temperature measuring range -40 to + 85°C, accuracy +/- 0.3°C
Measurement values: Temperature, °C
Mounting:
  • Housing
  • Wall mounting
  • inwall mount
Number of inputs / outputs: 1 - channel output
Plug and Play support , Auto-E-Connect Support: Yes
Power supply, Supply Voltage:
  • System supply, 5VDC (1-Wire main voltage)
  • Voltage supply 2.8VDC to 5.5VDC
Protection circuit:
  • ESD Schutz
  • Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use
Scope of delivery: Device and user manual
Temperature range, operation: -40°C to +85°C, Extended temperature range 2, (E2)
Temperature range, storage: -40°C bis +85°C, Extended temperature range 2, (E2)
Version: Basic Version / Basic Serie
Zustand: Neu

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

Frame 1 compartment UP BJ Living room sensor 2511-21x
Frame 1 compartment for 1-Wire UP living space sensor Busch-Jaeger® -Temperature -Temperature-Humidity Busch-Duro 2000® - Series Cover frame, 1 compartment Available design:- Reflex SI alpine white - Reflex SI white

From €1.71*

Product number: 42301-1M

Related products

Temperature sensor flush-mounted for Busch-Jaeger
Temperature flush-mounted sensor for switch ranges of the manufacturer Busch-Jaeger Living room sensor for precise temperature measurement in buildings, specially adapted to the switch ranges of the manufacturer Busch-Jaeger. With this sensor, a shapely integration of a high-precision temperature sensor into the very widespread switch ranges from Busch-Jaeger is possible. Optimum integration into Busch-Jaeger switch ranges Connection by screw terminal Blocking capacitor integrated for reliable operation even on longer connection cables High-precision sensor element for the 1-Wire bus Power supply via 2-wire (parasitic mode) or 3-wire system (ground,1-Wire +5V) Matching panels can be ordered in white or Alpine white. If we do not have the right cover for your Busch-Jaeger system in our range, please ask us. Temperature sensor DS18B20 Accuracy +/- 0,5° in the range of -10°C - 85°C Resolution 9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution 1-Wire connection 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Operating voltage 3 - 5,5V= Power consumption approx. 1mA Connection: Screw terminal Dimensions (outside) 68x68x12mm (LxWxH) Scope of delivery Sensor element and operating instructions Cover, frame can be ordered as well. Flush-mounted box is not included Busch-Jaeger is a trademark of Busch-Jaeger Elektro GmbH, Freisenbergstraße 2, 58513 Lüdenscheid and its respective owners.

Variants from €19.71*
From €23.31*

Product number: 11130M

Temperature sensor outdoor surface IP65
Waterproof outdoor temperature sensor for outdoor measurements or also for sauna, cold storage and industrial environments.The temperature sensor outdoor is dustproof, jet-proof with sealing class IP65. Due to the internal temperature sensor, the sensor is very well protected against wind influences. The cable entry is sealed with a gland. Note on mounting: Many measurement errors are caused by mounting the thermometer in an unfavorable location. Measurement errors are caused, among other things, by direct sunlight, the intrinsic heat of a building (an intermediate layer of insulating material between the sensor housing and the house wall can help here) and the back radiation of a neighboring building. Here measurement errors of approx. 1-2° can occur. An outdoor temperature sensor on buildings should be mounted e.g. in the north of a building at a height of approx. 2m. Translated with www.DeepL.com/Translator (free version)

From €27.81*

Product number: 11100

Flush-mounted temperature sensor for Berker, Jung, Merten
Temperature flush-mounted sensor for all 55mm switch ranges from the manufacturers Berker, Jung, Merten, Gira and many others. Living room sensor for precise temperature measurement in buildings, specially designed for all standard 55mm switch ranges This sensor allows for an attractive integration of a high-precision temperature sensor in the standard 55mm switch ranges. Optimal integration into standard switch ranges of many manufacturers Connection by screw terminal Blocking capacitor integrated for reliable operation even on longer connection cables High-precision sensor element for the 1-Wire bus Power supply via 2-wire (parasitic mode) or 3-wire system (ground,1-Wire +5V) We offer you matching covers from Berker in high-gloss white or matt. If we do not have the matching cover and adapter in our range, please ask us. Temperature sensor DS18B20 Accuracy +/- 0,5° in the range of -10°C - 85°C Resolution 9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution 1-Wire connection 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) Operating voltage 3 - 5,5V= Power consumption approx. 1mA Connection: Push In Clamp (screwless) Dimensions (outside) 68 x 68 x 28mm (LxWxH) Scope of delivery Sensor element and operating instructions Delivery with or without covers/panels possible. Berker, Jung, Gira and Merten are a trademark or brand name of the respective companies and their owners.

From €22.41*

Product number: 11131M