Temperature sensor cable LC 1-Wire 1,8m

Quantity Unit price
1 to 49
€9.90*
50 to 99
€9.41*
From 100
€8.91*

Available, delivery time 1-5 days, depending on the carrier

Product number: 11139
EAN: 0782321213566
Manufacturer product ID: 11139
Product information "Temperature sensor cable LC 1-Wire 1,8m"

Low cost 1-Wire Temperature Sensor DS18B20 in stainless steel sleeve with PVC connection cable and open cable ends.
The sensors are designed for measurement outdoors, on surfaces or in non-aggressive gases. The probes are not waterproof.

The Temperature sensor can be connected directly to one of our 1-Wire bus couplers, 1-Wire controllers, 1-Wire hub or to many other controllers.


Application:

Contact sensor for heating systems, outdoor sensor

Connection:

Open cable ends, cable length approx. 1.8m

Pin assignment:

Red = +5V, Black = GND, Yellow = Data

Operating temperature:

max. cable temperatures, moved 5° to 60°C, unmoved -10° to 80°C

Resolution:

9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution

Accuracy

+/- 0,5° in the range of -10°C - 85°C

Operation

2 or 3-wire connection (data, ground and 5V, parasitic operation possible)

1-Wire device:

DS18B20

Supply voltage:

3 - 5.5 VDC

Dimensions:

diameter 6mm, length 50mm (without cable)

Scope of delivery:

Cable sensor


Hint:
We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from +5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

1 wire connection: 2 or 3-wire connection (data, ground and 5V, parasitic operation possible)
1-Wire Interface: DS18B20 Temperature Chip
Connection type: Englisch Open cable ends, cable length approx. 1.8m
Dimensions: Diameter 6mm, length 50mm (without cable)
Function: Sensoric
Measurement values: Temperature, °C
Resolution: 9 - 12 bits, 0.5°C - 0.0625°C/bit depending on the selected resolution
Scope of delivery: cable sensor
accuracy: +/- 0.5° in the range of -10°C - 85°C
application: Contact sensor for heating systems, outdoor sensor
operating voltage: 3 - 5,5V=
pinout: Red = +5V, Black = GND, Yellow = Data

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

Kabelbinder Stahl 152mm
Kabelbinder aus rostfreiem StahlIdeal geeignet um Temperatursensoren an Heizungsrohren zu fixieren. Verschluss  Kugelverschluß Ausführung  Edelstahl Typ 304, Materialstärke 0,3mm Abmessungen 152x4,5mm Temperaturbereich  -80°C - +500°C Verpackungsmenge 5 Stück    

From €2.26*

Product number: 42624

Available, delivery time 1-5 days, depending on the carrier

microSD SanDisk 8GB industrial version
microSD SanDisk memory card, industrial version Suitable for continuous operation with extended operating temperature range.   Design microSD Industrial Version / Industrial Memory Card Type microSDHC card Capacity 8GB Speed read: 80MB/s write 50MB/s Operating temperature -40°C to +85°C Specification Class 10 - UHS I Technology MLC memory system

From €29.61*

Product number: 42179

Available, delivery time 1-5 days, depending on the carrier

Related products

Temperature sensor Pro M10 screw-in cable
Professional high-quality 1-Wire Temperature sensor in M10 screw-in sleeve with shielded, oil-resistant PUR connection cable and RJ 12 plug. The sensor can be operated permanently outdoors and in all environments within a temperature range of -40 to +125 °C. The probes are suitable for permanent use in water.The sensors are manufactured in Germany in high quality. Application example: - Temperature measurement of hot water storage tanks- Installation on heating pipes (e.g. flow and return temperature)- Temperature measurement of outdoor pools, swimming pools and ponds- Suitable for temperature measurement in harsh and conditionally aggressive environmentsTo connect the Temperature sensors we recommend the 1-Wire Adapter 1 or a 1-Wire Extention5 Distributor. The Temperature sensor can be integrated directly at one of our 1-Wire bus couplers or via a 1-Wire hub into the 1-Wire network.Note: The sensor cannot be NOT connected directly to the 1-Wire USB adapter, because of different pin assignments.

From €33.88*

Product number: 11107

Available, delivery time 1-5 days, depending on the carrier

Temperature sensor cable LC 1-Wire 1m
Low cost 1-Wire Temperature Sensor DS18B20 in stainless steel sleeve with PVC connection cable and open cable ends. The sensors are designed for measurement outdoors, on surfaces or in non-aggressive gases. The sensors are not waterproof. The Temperature Sensor can be connected directly to one of our 1-Wire bus couplers, 1-Wire controllers, 1-Wire hub or to many other controllers. Application Contact sensor for heating systems, outdoor sensor Connection Open cable ends, cable length approx. 1m Pin assignment Red = +5V, Black = GND, Yellow = Data Operating temperature max. cable temperatures, moved 5° to 60°C, unmoved -10° to 80°C Resolution 9 - 12 bit, 0.5°C - 0.0625°C/bit depending on the selected resolution Accuracy +/- 0,5° in the range of -10°C to + 85°C Operation 2 or 3-wire connection (data, ground and 5V, parasitic operation possible) 1-Wire device DS18B20 Supply voltage 3 - 5.5 VDC Scope of delivery Cable sensor Hint: We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from +5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.

From €8.01*

Product number: 11137

Available, delivery time 1-5 days, depending on the carrier