ESI 400 4-fold push button interface, 4 channel switch input

Quantity Unit price
1 to 49
€54.90*
50 to 99
€52.16*
From 100
€49.41*

Available, delivery time 1-5 days, depending on the carrier

Product number: 11235
EAN: 0098931698526
Manufacturer product ID: 11235
Product information "ESI 400 4-fold push button interface, 4 channel switch input"

With the ESI 400 4 Channel Switch Input Module, push buttons, switches or reed contacts can be (magnetic switch) can be interrogated.
For example, the status of doors, windows, roof windows, fire dampers or a garage door can be recorded.
A reed switch is only to be attached at a suitable place and connected to the ESI 400 module. The Status LED flashes when the status of one of the inputs has changed.

Even short switching pulses, e.g. from buttons, are detected by the ESI 400 4-Channel Switch Input Module and stored until the next readout cycle.

The ESI 400 module can be connected directly to switches or buttons. No external voltage is required for the switches. The ESI 400 module can be supplied with 5V - 12V operating voltage.

Function
  • 4 digital inputs for querying push-button or switch
  • No external voltage for buttons or switches necessary
  • Short keystrokes are also stored until the next readout cycle
  • Digital inputs with filters for "calmed" buttons / switch queries
  • Very small housing, intended for installation in flush boxes
number of inputs

4 digital inputs for push-button or switch pulse duration
at least 40ms

Operating voltage Pushbutton / switch approx. 5V DC voltage with approx. 1mA current inputs
are connected to the ground potential of the operating voltage (bus interface)
Connection length inputs Cable length per input max. 20m
Bus interface 1-Wire bus, interface with DS2408 command setThe
data line operates with typ. 5V voltage
Operating voltage 5 - 12V DC voltage (+/-10%) with max. 20mA current consumption
Display LED display for power and status change of the inputs
Connection Screw terminals 0,2 - 1,5qmm Cable cross section
Dimensions 43 x 43 x 25mm (LxWxH), optimized for installation in flush boxes
Protection class / IP class Protection class III, IP20
Scope of delivery Device and operating instructions in German, English Manual via download
1-Wire Interface: DS2408 instruction set with Plug and Play support (Auto-E-Connect Functions)
Connection length inputs: Cable length per input max. 20m
Connection type: Screw terminals 0.2 - 1.5qmm cable cross-section
Dimensions: 78 x 93 x 56mm (WxHxD)
Display: LED display for power and status change of the inputs
Function: Digital Input
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP20
  • Protection class III
Mounting: inwall mount
Number of inputs / outputs:
  • 4 digital inputs for buttons or switches
  • Pulse duration at least 40ms
Scope of delivery: Device and user manual
operating voltage: 5 - 12V Gleichspannung (+/-10%) mit max. 20mA Stromaufnahme

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

Reed contact installation/mounting, 5m
The reed contact / magnetic contact is used as opening detector for monitoring doors, housings, windows and for smart home systems. The housing variants of the magnetic switch incl. the magnet as built-in and surface-mounted version allow an optimal adaptation to the object to be protected. It is suitable for both recessed and surface mounting. As protection against sabotage (bridging protection) a connection cable with four wires of the same colour is used. The surface-mounted housings are designed so that the contact can be installed in both directions. To ensure magnetic decoupling in the case of ferromagnetic objects, or to compensate for any height compensation, spacer blocks are supplied with the surface-mounted version. It can be mounted on a door frame, a window block or on the standing surface of an object to be monitored in such a way that an alarm is triggered if it is opened or lifted by more than 2 cm. VdS:     VdSClass B                       according to VdS GmbH (Damage prevention GmbH) Material:                      PA Magnet:                       Diameter 6 mm x 19 mm Neodymium, axially polarized Protection class:          IP 67 Connection cable:       4-core Cable length:               5 m LIYY ZGL 4 x 0.14 mm² Cu tin-plated LSA insulation,displacement technology suitable. Dimensions (WxHxD): 35 x 10 x 10 mm Color:                           white Contact type:               1 - pole NO contact Contact dimensions:    6 x 19mm Mounting flange:          6x6 / 10 mm for magnet and contact; for wood,  plastic, aluminium and non-magnetic metals  

From €9.81*

Product number: 11354

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Available, delivery time 1-5 days, depending on the carrier

Leak detector Water detector 12V
Prepared for the next flood! Leakage sensor / water detector to protect against water damage The leakage sensor reliably detects moisture or water on the floor. The sensor itself is housed in a waterproof housing, so it can "survive" without damage even at higher water levels. The leakage detector can be integrated into a 1-Wire network in combination with our 1-Wire Switch Input Module Art.No. 11214  (not included) . The module can be supplied with 12V voltage from a 1-Wire hub. The switching polarity and sensitivity is adjustable. Typical applications are the detection of liquids due to defective water pipes, defective washing or dishwashing machines and flooding. The relay contact closes when moisture is detected. Measuring method:    Electrolytic AC voltage measurement Evaluation:                    relay  contact (active open or closed) Power supply:              12V AC or DC (+/-10%)  / relay contact:                max. 30V / 4A Dimensions:                  80 x 82 x 58mm Scope of delivery:        sensor, operating instructions

From €67.41*

Product number: 20005

Available, delivery time 1-5 days, depending on the carrier

1-Wire Hub III DC, central power supply
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage. The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller. The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function: Central power supply of the 1-Wire network 1-Wire distribution for several bus sections LED display for power and 1-Wire activity Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.

From €70.11*

Product number: 11322

Available, delivery time 1-5 days, depending on the carrier

1-Wire cable set-1
5 different coloured wires (YV wire), each 5 m long. Colours: red, black, blue, green, yellow for wiring of 1-Wire modules in the control cabinetDesign: wire (YV) 0.5qmm Length: 5m each colourColours: red, black, blue, green, yellow

From €5.31*

Product number: 11313

Available, delivery time 1-5 days, depending on the carrier

Related products

Tip
1-Wire 8-fold digital input 10-30V
Application With the 8-fold digital input module the status of 8 switches, reed contacts or all kinds of digital sensors can be queried.The status of the switch inputs is displayed via the LED indicators on the front panel.When the input voltage is present, the respective LED indicator lights up.AdvantageYou can acquire 8 digital signals via one moduleVia manual keys you can simulate an input status without the input being connected. This is very helpful during commissioning or maintenance.Per ESERA extended Plug and Play system, called "Auto-E-Connect", the 8-fold digital input EDIN 800 is installed fully automatic in ECO Controller easy and fast.Features Interference resistant: To further protect the inputs against interference, the module has filters with a delay of only 30ms.Storage: Even short changes of the input signals are stored. So no signal or pulse can be lost between the reading cycle.Manual function: Each input can be set manually by push button for test purposes, maintenance or development.Isolation : The inputs are isolated from the 1-Wire network by optocouplers. This allows very long connection cables between the module and the sensors without interfering with the 1-Wire bus. In addition, the isolation between switch inputs and 1-Wire network provides increased safety.For the operation of the module we recommend the use of one of our 1-Wire Hub modules.Number of inputs8Input voltageLow: 0-5V High: 10-30VDC, (common negative)Input currentmax. 5mA per channel at 24VDC1-Wire Plug and Play System,Auto-E-Connect FeaturePre Configuration: Wish OWD storage Automatic Positioning: OWD enhanced Plug And Play Sensorfinder Function: LED display for sensor detection Classes Assignment: OWD class via ECO ControllerBus Interface1-Wire Industrial Bus with ESERA Auto-E-Connect System, Level I - III 5V, Data In, Data Out, Ground/GND and Ground (Earth, Functional Ground)Data interfaceIndustrial 1-Wire Bus (12V, Data and Ground), DS2808 command setLED indicators10 LEDs (Power LED, Status LED, 8 x Input) Input LED lights up at status high of the 1-Wire DS2408 interfaceIsolationmin. 500VAC against 1-Wire busOperating voltage12VDC, max. 40mA, all inputs activePower consumptionmax. 0.5W, all inputs activeConnectionscrew terminals (up to 2,5qmm cable cross section)Dimensions32 x 90 x 70mm (WxHxD), 2TE top hat rail housingInstallationIntended for switch cabinet installation (top-hat rail)HousingABS plastic with high percentage of used plasticGreen(RAL 6020)Temperature, operation-10°C to +50°CHumidity, operation10-92%, non-condensingScope of deliveryDevice and quick guide, operating instructions as download

From €80.91*

Product number: 11216

Available, delivery time 1-5 days, depending on the carrier