1-Wire Analog Eingang, 1-Wire Analog Ausgang

Here you will find the following devices for measuring and outputting analog voltage. With these devices e.g. pumps or power controllers are controlled or sensor values are read in via 0-10VDC interface. All analog devices are equipped with isolation between input and output according to industry standards.

1-Wire Analog input 4-fold 0-10V Iso 1-Wire bus system

With the 1-Wire Analog Input Module 4 DC voltage sources can be measured independently from each other with a voltage range of 0-10VDC.As an example, pressure sensors, brightness sensors or other transducers can be read in. The inputs have a common ground potential and are electrically isolated from the 1-wire bus. This prevents ground loops or problems caused by potential differences. The inputs have reverse polarity protection, overvoltage protection and input filters. Measuring input 4 channels, 0-10VDC with common ground Resolution 12bit Input resistance 200 kOhm Isolation Electrical isolation between measuring input (Anlog input) and bus interface Bus Interface 1-Wire Bus (GND, Data, 12VDC) 1-Wire function DS2450 command set (see operating instructions for details) Supply voltage 12VDC Power consumption approx. 15mA / 12V Installation Control cabinet installation (top hat rail) Housing colour Green (Different from the illustration) Connection Screw terminals for 1-Wire bus and measuring input Protection class III Assembly Designed for top hat rail Dimensions 2HP, 32 x 71x 90mm (WxHxD) Scope of delivery Finished device and operating instructions

From €79.11*

Product number: 11230

Available, delivery time 1-5 days, depending on the carrier

Details

1-Wire Analog Output PRO 0-10V Isolated

With the 1-Wire Analog Output Pro, a DC voltage in the range of 0-10V with a resolution of 8 bits can be easily output. The 1-Wire analog output module can be used to control a heating mixer, a dimmer or other power units, for example. The analog output is galvanically isolated from the 1-wire bus and the power supply. The insulation prevents ground loops or effects due to potential differences. Analog output 0-10 VDC, max. 20 mA Resolution 8 bits Connection Screw terminals for 1-Wire bus and input voltage (up to 2.5qmm) Interface 1-Wire Bus (GND, Data, +12V) Data interface 1-Wire Interface, DS2408 Command Set Operating voltage 12VDC (+10% / -20%) Power consumption max. 30mA Dimensions 1HP, 17 x 71x 90mm (WxHxD) Isolation Analog output electrically isolated against 1-Wire interface Assembly Designed for control cabinet installation (top hat rail) Protection class III Scope of delivery Finished device and operating instructions

From €59.31*

Product number: 11208

Details