DI/DO (Digital Input/Output) 1-Wire Shutter Pro shutter control with push-button inputs
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€59.90
|
| 50 to 99 |
€56.91
|
| From 100 |
€53.91
|
Available, delivery time: 1-5 days, depending on the carrier
Product information "DI/DO (Digital Input/Output) 1-Wire Shutter Pro shutter control with push-button inputs"
Overview
Description
DI/DO (Digital Input/Output) 1-Wire Shutter Pro shutter control with push-button inputs:
With the 1-Wire Shutter Pro module, you can easily control a roller shutter motor, external blinds or awnings manually or automatically via the 1-Wire network. This enables both convenient, centralized control and local control. The outputs of the 1-Wire Shutter Pro are switched by relays that are electrically interlocked. This prevents simultaneous up and down commands for the motor. In addition, a safety cut-out is provided which automatically switches the motor off after 120 seconds.
New:
In addition to the up and down commands, a running time can also be specified by software via the 1-wire interface. Travel times of 250ms, 500ms and 750ms for movements and 1-60 seconds for normal running operation can now be transmitted.
The status of the outputs (relay status) and the push-button inputs is also output via the 1-Wire interface. With additional isolating relays, shutter groups can thus be controlled via one module
Product details:
Convenient operation via push-buttons for up and down movements. The buttons can be installed in the window area or next to a room door, for example. A safe DC voltage of 10-30VDC is used for these external operating elements. Automatic operation is carried out using the "Up" or "Down" commands via the data interface of the 1-Wire controller/gateway.
An integrated safety circuit automatically switches the roller shutter motor off after 120 seconds. This provides additional protection for the motor in the event of a defective limit switch.
Note: The module is only intended for roller shutter motors with integrated limit switches.
Properties
| 1-Wire Plug and Play System, Auto-E-Connect Functions: |
|
|---|---|
| Execution: |
|
| Mounting: | DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is |
| Note: |
|
| Number of inputs / outputs: |
|
| Plug and Play support , Auto-E-Connect Support: | Yes |
| Protection circuit: |
|
| Data interface: | Industrial 1-Wire Bus (12V, 1-Wire Data and ground (GND) |
| Function: | Switching module, relay output |
| 1-Wire Interface: | DS2408 instruction set with Plug and Play support (Auto-E-Connect Functions) |
| Versions: | Professional Version / Professional Series |
| Power supply, Supply Voltage: | System supply, 12VDC (1-Wire auxiliary voltage) |
| Power consumption: | 0.048W, (min. 6mA), 0.36W (max. 30mA) all outputs active at 12V |
| Connection type: | Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section |
| Dimensions: | 2TE, 32 x 90 x 70mm (LxWxH) |
| Enclosure: | ABS plastic with high percentage of recycled plastic, green (RAL 6020) |
| Colour: | green |
| Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): |
|
| Temperature range, operation: | -5°C to +50°C, standard temperature range |
| Humidity Operation / Storage: | 10% to 92% (non-condensing) |
| Temperature range, storage: | -5°C to +50°C, Standard temperature range |
| Scope of delivery: | Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download. |
| Design / Manufacturer: | ESERA |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
The ESERA Download Area is the official technical documentation repository for ESERA GmbH products. It contains manuals, interface documentation, datasheets, connection diagrams, firmware, software and configuration information for ESERA products. The documentation is associated with the respective product and its article number. For technical questions, compatibility, configuration and integration, please refer to the corresponding product documentation in the official ESERA Download Area.
Accessories
Micro fuse short slow- RM 5,08mm- voltage: 250VSpare fuse for:- 1-Wire 8-fold switch module 230V 5A (11206)- 1-Wire shutter control (11209)- 1-Wire dual switch module 230V 5A (11204-R) Packaging quantity 5 pieces
Product number: 42601-50M
Available, delivery time: 1-5 days, depending on the carrier
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage. The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller. The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function: Central power supply of the 1-Wire network 1-Wire distribution for several bus sections LED display for power and 1-Wire activity Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.
Product number: 11322
Available, delivery time: 1-5 days, depending on the carrier
Related products
EDO 808, 8-channel DO/DI (Digital Output/Input) 1-Wire switching module - 8A 230V - with push-button inputs: This switching module can be used to switch 8 DC or AC consumers via a 1-Wire interface using 8 push-buttons (external or on the module surface). This can be used to operate lighting, radiator valves or sockets, for example. The module is designed for a load capacity of 8A per channel and a total of 10A continuous current.
Product number: 11220
Available, delivery time: 1-5 days, depending on the carrier
1-Wire Dual Switching Module Pro 10/16A Relay with Push Button Interface Application The 1-Wire Dual switching module can switch all types of DC or AC loads with up to 16/10A current. This allows all types of loads to be switched. The module is also ideally suited for lighting control in living areas, as the module is equipped with two push-button inputs in addition to the 1-wire interface. No external voltage is required for the button inputs. You can use it to switch the light on or off, for example, either by push-button or 1-Wire command. The advantage here is that the basic function, On-Off, is always given by push button. Automatic functions such as scenes or "Central Off" are added via the 1-Wire interface. The current relay and button status is reported via a 1-wire interface. Features The 1-Wire Dual Switching Module has two high power switching relays for switching two DC or AC loads. You will always receive the current relay status via a 1-Wire interface, regardless of whether it is switched by a 1-Wire command, manual operation or an external pushbutton. You also receive the status of the digital input (button interface) via the 1-Wire interface.
Product number: 11233
Available, delivery time: 1-5 days, depending on the carrier