1-Wire components, 1-Wire chips, such as DS18B20
DS18B20 1-Wire Temp Sensor
DS18B20, 1-Wire Temperature Sensor Temperature sensor with high accuracyTemperature range: -55 - +125°CSupply voltage: 3 - 5.5VHousing: TO 92Accuracy: ±0.5°C from -10°C to +85°CHint: We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.
Product number: 42000
Available, delivery time: 1-5 days, depending on the carrier
DS2401 1-Wire Serial Chip
DS2401+, 1-Wire Serial Number Module DS2401 Silicone Serial Number Function: Serial number module for 1-Wire bus Housing: TO92 Supply voltage: 2.8V to 5.5V For further data please refer to the data sheet (Download) Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.
Product number: 42001
DS2406 1-Wire Dual Addressable Switch Plus 1Kb Memory
DS2406+, 1-Wire Dual Switch with 1K memory DS2406 Dual Addressable Switch Plus 1Kb Memory Function: 1 channel I/O module for 1-Wire bus Housing: TO92 Supply voltage: 2.8V to 5.5V Switching voltage/current max. 13V, max. 0.1A For further data please refer to the data sheet Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.
Product number: 42002
DS2408S+ 1-Wire 8-Fach Digital I/O Chip
DS2408, 1-wire 8-fold digital I/O module Dallas Addressable 8-Port Switch, switching module for 8-fold digital input or digital outputTemperature range: -40°C to +85°C Supply voltage: 2.8V to 5.25VType: DS2408S+ Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.
Product number: 42003
Currently not available, please sign up to get notified
DS2413 1-Wire Dual I/O Chip
1-Wire Dual Digital I/O Chip Actuator for 2 channel digital input or output Temperature range: -55 to +85°C- Supply voltage: 2.8V - 5.25VHousing: TOSC 8 Type :DS2413P+PIO Pins Support 20mA max Continuous Current Sink - Supports 28V (max) PIO Pin Operating Voltage - On-Resistance of PIO Pulldown Transistor 20mA, max; OFF Resistance 1MOhm - Parasitic Power Supply Through 1-Wire
Product number: 42004
DS2423 1-wire dual counter / counter module
DS2423 1-Wire Dual Counter Module / DS2423 1-Wire Dual Counter Function: Dual counter module for 1-Wire network 2x 32Bit counter Housing: 6-pin TSOC SMD Housing Supply voltage: 2.8V to 5.25V Module not resettable. For further data please refer to the data sheet Hint:We recommend to connect a 100nF (0.1µF) capacitor (see accessories) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.
Product number: 42005
Currently not available, please sign up to get notified
DS2438 Batterie-Management Smart Battery Monitor
1-Wire Battery Management Smart Battery Monitor with Temp Sensor Type/designation DS2438Z+ Housing SOIC-8 (SMD) Supply voltage 2.4 V to 10 V Function Temperature sensor Analog Input 0-10VDC (VAD) Analog Input 0-250mV, +/- (Xsens) Measurement Operating voltage (VDD) Operating temperature -40°C to +85°C Details See data sheet The DS2438 is a Smart Battery Monitor and is used in its original function as a mobile phone battery monitor. For automation, especially in the smart home area, it is also used for other functions: as voltage meter (supplies the bus voltage (VDD) as thermometer - the temperature is measured AD-Converter (VAD) - is used to measure humidity or brightness Current input (XSENS) - freely available Hint: We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.
Product number: 42006
DS2480 1-Wire Serial Line Driver
DS2480B+ Bus master, serial to 1-Wire deviceDS2480B+ Serial 1-Wire Line Driver with Load Sensor Function: Bus master serial for 1-Wire with load sensor Housing: TO 8 Supply voltage: 2.8V to 5.25V For further data please refer to the data sheet Hint: We recommend to connect a 0.1µF capacitor (ceramic) in parallel to the 1-Wire device, i.e. from 5V to GND. The capacitor should be placed as close as possible. This increases the stability of the entire 1-Wire network.
Product number: 42008