1-Wire Shutter Pro shutter control V4

Quantity Unit price
1 to 49
50 to 99
From 100

Available, delivery time 1-5 days, depending on the carrier

Product number: 11231
EAN: 0782321213436
Manufacturer product ID: 11231
Product information "1-Wire Shutter Pro shutter control V4"

Shutter control / Shutter Pro for 1-Wire bus and push button interface

With the 1-Wire Shutter Pro module you can easily control a roller shutter motor, external blinds or awnings manually or automatically via the 1-Wire network. Thus a central and convenient control as well as local decentralized control is possible. The output of the 1-Wire Shutter Pro is switched by relays, which are electrically interlocked with each other. This can result in an up and down command for the tubular motor at the same time. In addition, a safety shutdown is provided, which automatically switches off the motor after 120 seconds.
New, a runtime can now be transferred via software (1-Wire interface) in addition to an Up or Down command. Travel times of 250ms, 500ms and 750ms for tilting movements and 1-60 seconds for normal running operation can now be transferred.

New: The status of the output (relay status) and the button inputs is output via the 1-Wire interface.With additional isolating relays, shutter groups can be controlled via a module.

product details:
Convenient manual operation via push-buttons for up and down, which can be installed in the window area or next to a room door, for example. A harmless DC voltage of 10-30V is used to operate the external pushbuttons. Automatic operation via 1-Wire commands via the data interface.
An integrated safety circuit automatically switches off the roller shutter motor after 120 seconds. This provides additional protection for the motor in case of a defective limit position switch.
Note: Module is only intended for roller shutter motors with integrated limit switches.

Control system
  • 1-Wire interface (DS2408 command set)
  • Manual operation by push button on top of the module
  • Digital / binary input for external push buttons (manual operation)
Up / Down times per 1-Wire interface
  • 250ms, 500ms and 750ms for tilting movements of laminations and external blinds Shading
  • 1 - 60 seconds in 1 second steps for up and down movement
  • 120 seconds per automatic safety stop (no time input required)

Module function switchable for roller shutters or lamella or external blinds

Advertisements LED display Up / Down

Digital / binary input for external push buttons
(manual operation)

10-30VDC max. 10mA, electrically isolated
Switching power/current 1150VA, 5A continuous current (resistive load)
Operating voltage
5 - 230V direct or alternating voltage
Connection Screw terminals for cable cross sections up to 2,5qmm
Supply voltage +12VDC, max. 20mA
Interface 1-Wire interface, three-wire system with ground/GND, Data and +12V
1-Wire interface
DS2408 command set
Dimensions 2HP, 32 x 71x 90mm (WxHxD)
Connection Screw terminals
Scope of delivery Finished device, operating instructions

Controlled by 1-Wire controller 1 / 1-Wire gateway by command "Up" and "Down" with time function. For details, please refer to the programming manual for the 1-Wire controller / 1-Wire gateway / Station-200
. convenient software modules are available for free download for integration into IP-Symcon, 1-Wire controller and ESERA Station 200. For details please refer to the category "Compatible controllers / IP-Symcon".

1-Wire Interface: DS2408 instruction set with Plug and Play support (Auto-E-Connect Functions)
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Automatic library mapping: The appropriate library is mapped fully automatically for the sensor
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
Colour: green
Connection type: Screw terminal/s for cable up to 2.5qmm (~ AWG 13) cross-section
Data interface: Industrial 1-Wire Bus (12V, 1-Wire Data und Masse (GND))
Design / Manufacturer: ESERA
Dimensions: 2TE, 32 x 90 x 70mm (LxWxH)
Enclosure: ABS plastic with high percentage of recycled plastic, green (RAL 6020)
  • Pushbutton interface (binary input 10-30VDC, normally open contact) to control the outputs
  • Rollladen oder Markisenbetrieb: Steuereingänge für Aufwärts, Stopp, Abwärts. Raffstore oder Jalousien: Taster, kurz für Kippbewegung, Taster, lang für Aufwärts, Stopp, Abwärts.
Function: Switching module, relay output
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP20
  • Protection class II
Mounting: DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
  • An integrated safety function automatically switches off the connected motor after 120 seconds.
  • During motor operation, the travel can be stopped by the control inputs and module pushbuttons.
  • In the case of capacitive or inductive loads, appropriate additional circuitry, such as spark suppression capacitors, must be provided. Minimum load 10mA per output The max. current and power are reduced for non-resistive loads.
Number of inputs / outputs:
  • 1 Shutter (1 x Up Output, 1 x Down Output)
  • 1 x relay output, normally open contact (NO)(NO contact) and changeover relay for running direction, intended for motor control e.g. roller shutter motor
  • 2 x push button interface (binary input/pulse input 10-30VDC) to control the outputs
Plug and Play support , Auto-E-Connect Support: Yes
Power Consumption: 0.048W, (min. 6mA), 0.36W (max. 30mA) all outputs active at 12V
Power supply, Supply Voltage: System supply, 12VDC (1-Wire auxiliary voltage)
Protection circuit:
  • Enhanced ESD protection with ±4kV according to IEC 61000-4
  • Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use
  • Overvoltage protection for the voltage supply / power supply
  • Reverse polarity protection for voltage supply / power supply
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -5°C to +50°C, standard temperature range
Temperature range, storage: -5°C bis +50°C, Standard temperature range
Version: Professional Version / Professional Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials


Micro fuse short slow blow
Micro fuse short slow- RM 5,08mm- voltage: 250VSpare fuse for:- 1-Wire 8-fold switch module 230V 5A (11206)- 1-Wire shutter control (11209)- 1-Wire dual switch module 230V 5A (11204-R) Packaging quantity 5 pieces

From €0.81*

Product number: 42601-50M

Available, delivery time 1-5 days, depending on the carrier

1-Wire Hub III DC, central power supply
1-Wire Hub III DC, central power supply and distribution for the 1-Wire network with 24VDC input voltage. The 1-Wire Hub III DC is the central module for building a 1-Wire network. The 1-Wire Hub III DC supplies the 1-Wire network with 5V and 12V voltage and distributes the 1-Wire data line. 1-Wire Hub III DC can be ideally combined with a 1-Wire bus coupler (USB, Ethernet or serial) or 1-Wire controller. The input voltage of the 1-Wire Hub III DC is nominally 24VDC (18-36VDC) and is therefore especially suited for system environments with DC voltage supply, such as PLC controls. Equipment / Function: Central power supply of the 1-Wire network 1-Wire distribution for several bus sections LED display for power and 1-Wire activity Measurement function for the output voltages (voltage and current measurement for the 5V and 12V output)Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.Note: The device has no repeater function for the 1-Wire data signal, which means that the device does not increase the possible network size.

From €70.11*

Product number: 11322

Available, delivery time 1-5 days, depending on the carrier

Related products

1-Wire 8-fold switch module 230V 8A with button inputs
Relay switch module with 1-Wire and push button interface With this 8-fold switching module 8 DC or AC consumers can be switched via 1-Wire interface, via 8 external push buttons or the buttons on the module surface. This can be used to operate lighting, radiator valves or sockets, for example. The module is designed for a load capacity of 8A per channel and a total of 10A continuous current.

From €127.71*

Product number: 11220

Available, delivery time 1-5 days, depending on the carrier

1-Wire Dual switching module Pro 230V 10/16A with push-button interface
1-Wire Dual Switching Module Pro 10/16A Relay with Push Button Interface Application The 1-Wire Dual switching module can switch all types of DC or AC loads with up to 16/10A current. This allows all types of loads to be switched. The module is also ideally suited for lighting control in living areas, as the module is equipped with two push-button inputs in addition to the 1-wire interface. No external voltage is required for the button inputs. You can use it to switch the light on or off, for example, either by push-button or 1-Wire command. The advantage here is that the basic function, On-Off, is always given by push button. Automatic functions such as scenes or "Central Off" are added via the 1-Wire interface. The current relay and button status is reported via a 1-wire interface. Features The 1-Wire Dual Switching Module has two high power switching relays for switching two DC or AC loads. You will always receive the current relay status via a 1-Wire interface, regardless of whether it is switched by a 1-Wire command, manual operation or an external pushbutton. You also receive the status of the digital input (button interface) via the 1-Wire interface.

From €58.41*

Product number: 11233

Available, delivery time 1-5 days, depending on the carrier