Thermocouple type-K straight, probe 50mm, 3m, -100°C to 1100°C
| Quantity | Unit price |
|---|---|
| 1 to 49 |
€16.90*
|
| 50 to 99 |
€16.06*
|
| From 100 |
€15.21*
|
Instantly available
Shipping until , if you place your order within the next .
Product number:
20018
Manufacturer product ID:
20018
Product information "Thermocouple type-K straight, probe 50mm, 3m, -100°C to 1100°C"
Overview
Type K straight nickel-chromium / nickel-aluminum, IEC 60584-1 Thermocouple type K, nickel-chromium-nickel
Description
Type K - Nickel-Chromium / Nickel-Aluminum, IEC 60584-1
Type K thermocouple, commonly referred to as nickel-chromium-nickel.
- Connection cable 2m
- Straight probe, length 50mm
- Connection cable withkink protection
- Glass fiber cable insulation
- Measuring range -100°C to 1100°C
- Terminals or open cable ends
Properties
| Execution: | 2 pin connector |
|---|---|
| Length, cable length: | 3m |
| Measurement values: |
|
| Mounting: | Cable sensor |
| Number of inputs / outputs: | 1 - channel input |
| Function: |
|
| Versions: | Professional Version / Professional Series |
| Connection type: | Open cable ends |
| Colour: | gray |
| Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): |
|
| Temperature range, storage: | -55°C to +125°C, Extended temperature range 3, (E3) |
| Scope of delivery: | Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download. |
| Design / Manufacturer: | ESERA |
Login
| Device Documentation | Operating instructions, connection diagram, conformity, ... |
| Info Material | Product catalogue, Brochures |
| Technical Downloads | Software & co. |
| Worth knowing | Wikis, entries, tutorials |
Zubehör
Tip
Shipping until
ETH 1200 Measuring transducer for thermocouples, measuring range -100°C to 1200°C
The ETH 1200 is a high-precision measuring transducer for the latest generation of thermocouple sensors, developed for demanding high-temperature measurements from -100 to +1200°C. This versatile device is ideal for industrial applications, commercial use and also for the home where precise temperature monitoring is required.
Thanks to a robust EMC and earthing concept, it offers comprehensive protection with overvoltage protection up to 35V and reliable fault indication via an LED system that signals cable breaks and interruptions.
Main features:
LED displays: Visualization of power, sensor status and 1-Wire data.
Sensorfinder LED: Enables the sensor to be found quickly in large networks.
Plug and Play Installation: Integrates automatically into ECO Controller thanks to ESERA's patented Auto-E-Connect system.
Quick installation:Simple installation using screw terminals in just a few minutes.
Compact design: Aesthetically pleasing and optimized for installation in switch boxes.
Power supply: Operation with simple 5VDC voltage.
This sensor combines state-of-the-art technology with easy handling and quick installation, ideal for reliable environmental monitoring.
Product number: 11172
Instantly available
Shipping until , if you place your order within the next .
Tip
in production
EPT 1000 measuring transducer for PT 1000 sensors, measuring range -50°C to +700°C
The EPT 1000 is an advanced and precise transducer designed for temperature measurement from -50 to 700°C in industrial, commercial and residential applications. Equipped for the innovative ESERA Auto-E-Connect system, it enables simple and fully automatic integration into ECO controllers.
Thanks to a robust EMC and earthing concept, it offers comprehensive protection with overvoltage protection up to 45V and reliable fault indication via an LED system that signals cable breaks and interruptions.
Main features
LED displays: Visualization of power, sensor status and 1-Wire data.
Sensorfinder LED: Enables the sensor to be found quickly in large networks.
Plug and Play Installation: Integrates automatically into ECO Controller thanks to ESERA's patented Auto-E-Connect system.
Quick installation:Simple installation using screw terminals in just a few minutes.
Compact design: Aesthetically pleasing and optimized for installation in switch boxes.
Power supply: Operation with simple 5VDC voltage.
The EPT 1000 combines state-of-the-art technology with ease of use and high reliability, ideal for accurate high temperature measurements.
Note: Please note that the Loxone 1-Wire Extension does not support the full functionality of this state-of-the-art sensor. Instead, we recommend using an ECO Controller as a suitable interface for optimal performance and compatibility.
Product number: 11175
Instantly available
Shipping until , if you place your order within the next .
Ähnliche Produkte
Shipping until
1-Wire 8-Fach Schaltmodul, Platine
1-Wire 8-Fach Schaltmodul, Leiterplatte ohne Bauteile
Unbestückte Leiterplatte zum Aufbau eines 1-Wire 8-Fach Schaltmoduls.
Mit dem 1-Wire 8-Fach Schaltmodul können 8 Gleich- oder Wechselspannungsverbraucher geschaltet werden. Das Gerät ist in zwei Gruppen zu je 4 Kanälen aufgebaut. Jede Gruppe hat einen getrennten Stromeingang, der mit je 5A abgesichert ist.
Anzahl Kanäle
8
Schaltstrom
5A pro Ausgang, maximal 5A pro 4-Fachgruppe
Schaltspannung
Gleich- oder Wechselspannung bis 230V
Einbau
Für Hutschienengehäuse und Schaltschrankeinbau vorgesehen
Anschluß
Schraubklemmen für 1-Wire Bus und Schaltkontakte (bis 2,5qmm möglich)
Absicherung
Sicherungen innenliegend, 2 x Micro Fuse 5A/T
Versorgungsspannung
5V und 12V
Stromaufnahme
5V ca. 1mA, 12V ca. 100mA (alle Ausgänge aktiv)
Schutzklasse
II
Lieferumfang
Unbestückte Platine in Industriequalität ohne Bauteile oder Gehäuse. Bauanleitung per Download
Hinweis: Auf der Platine müssen SMD-Bauteile gelötet werden.
Product number: 11806
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire 8-fold switch m. Display pl.
1-Wire 8-fold switch module display board
Unassembled printed circuit board (display board) for the assembly of an 8-fold switching module
Display board for mounting the 1-Wire 8-fold switch module
Installation: Designedfor DIN rail housing Dimensions: 65 x 55mm (WxH) Scope of delivery: Unassembled industrial quality board without components or housing. Building instructions per download
Further information, like program examples, data sheets or drivers can be found in our download area
Product number: 11802
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Adapter 1, RJ12 to Push In Terminal Adapter
Adapter for 1-Wire cable Temperature sensors. The 1-Wire Adapter 1 is designed to connect all 1-Wire temperature cable sensors 1-Wire network. The adapter has an input with push in terminals and an output with RJ12 socket to which 1-wire cable temperature sensors can be connected directly. With this adapter it is not necessary to remove the existing plugs of the temperature sensors. The 1-Wire Adapter 1 is not designed to connect to a USB Adapter DS9490.
Product number: 11118
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Adapter 2, RJ45 to screw terminal
The 1-Wire Adapter 2 is designed to adapt a network cable to open Push In terminals (screwless terminal). This means that inexpensive CAT network cables can be used for cabling the 1-Wire network and can be easily adapted to screw terminals. This prevents electrical damage caused by cut and incorrectly connected CAT wires, e.g. for living room sensors.
The adapter has a RJ45 connector on one side and a Push In terminal for ground, 5V, 12V and 1-Wire data on the other side. It is no longer necessary to remove the existing network connectors. The pin assignment of the RJ45 socket is matched to our 1-Wire Hub RJ45.
Product number: 11124
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Adapter USB DS9490R
1-Wire Adapter USB, DS9490R
USB adapter with 1-Wire interface. The adapter provides a quick and easy connection between the computer and the 1-Wire network. Individual 1-Wire sensors can be connected directly. For a network, a 1-Wire Hub or 1-Wire Hub II is recommended as the central power supply.
Note: The assignment of the 1-Wire RJ11 socket is different to the 1-Wire cable sensors 11105 and 11106.To connect the 1-Wire adapter to the 1-Wire hub we recommend the adapter cable 11311. - High-Speed 12Mbps Universal Serial Bus (USB) Interface - Supports Standard and Overdrive 1-Wire Communication - Slew-Rate-Controlled 1-Wire Timing and Active Pullup for Improved 1-Wire Network Performance - DS9490R has an RJ11 interface for standard connection - Built-In Custom DS2401 Identification Chip - Reads all 1-Wire and iButton Devices. Writes All Except EPROM 1-Wire/iButton Devices
Connection: USB (1.1) to RJ11 (1-Wire)Supply voltage: 5VDC1-Wire device: DS9490
Product number: 11304
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Analog Input, Board
1-Wire 3-fold analog input, 0- 5V or 0 - 10V(Unassembled printed circuit board for the construction of a 1-Wire 3-fold analog input)
With the 1-Wire analog input module, three DC voltage sources can be measured independently of each other. As an example, pressure sensors, brightness sensors or other transducers can be read in. The inputs are not isolated from the 1-wire bus and have a ground potential. The module is only intended for the connection of isolated DC voltage sources.The measuring inputs have reverse polarity protection, overvoltage protection and input filters. The measuring range (0-5VDC or 0-10VDC) can be switched by software.
number of channels
3
Measuring input
0-5VDC or 0-10VDC
Input resistance
Input resistance 200k
Supply voltage
5V and 12V
Power consumption
approx. 15mA (all inputs active)
Connection
Screw terminals for 1-Wire bus and input voltage
Isolation
No isolation between input and 1-Wire bus
Installation
Designed for installation in DIN rail housing and control cabinet installation
1-Wire device
DS2450(4-fold analog input)
Protection class
III
Scope of delivery
Unassembled board in industrial quality without components or housing. Building instructions per download
Note: SMD components must be soldered on the board.
Product number: 11810
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Bus Coupler USB Pro, isolated
1-Wire Bus Coupler Pro with USB interface, isolation and external power supply
With the professional 1-Wire Bus Coupler USB V3 a stable and electrically isolated connection of the 1-Wire network and a PC, mini computer (e.g. Raspberry Pi) or to many other controllers is established. The 1-Wire Bus Coupler USB is compatible with the serial version of Maxim, DS9097 and DS9097E, and works with a standard DS2480 1-Wire master device. By using the 1-Wire standard interface module (DS2480), the 1-Wire bus copller is compatible with all controllers that support this module. These are for example IP-Symcon, FHEM, OpenHub and many more.
A special highlight of the 1-Wire Bus Coupler USB V3 is the external power supply. This significantly increases the operational reliability of the data connection to the computer and prevents problems caused by unreliable USB power supplies. The use of more expensive USB hubs is no longer necessary.For the 1-Wire network the 5V output voltage is provided. The insulation prevents interference from and to the PC and reduces possible "electrosmog" in the house. The insulation also increases electrical safety.Individual 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended.
Data interface
USB 1.1, with FTDI FT232RL Chip (Virtual COM Port)
Compatibility
To DS9097U 1-Wire Adapter SerialApplicable for many software, such as OWFS, IP-Symcon, FHEM, which is intended for the DS9097U (DS2480 device) Drivers for different operating systems in the download area of this article.
Display LED
Power and data
1-Wire device
DS2480R+
Power supply
9-32 VDC max. 500mA (power supply unit see accessories)
Control
Control by all devices and controllers that support the DS2480 (serial master)
Dimensions
85 x 32 x 70mm
Protection circuit
Reverse polarity protection for 1-Wire output and supply voltage
Isolation
Between 1-Wire bus and PC interface min. 500VDC
Scope of delivery
Finished device and operating instructions
Product number: 11302-U
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire bus coupler with RS232 (TTL 5V), industrial version, galvanic isolation
DIN rail adapter between PC and 1-Wire networkIndustrial 1-Wire bus coupler with RS232 (TTL 5V standard) in industrial design with galvanic isolation between the data and 1-Wire bus interface.1-Wire bus coupler RS232 in DIN rail housing. With the 1-Wire Bus Coupler a fast and easy connection between computer and 1-Wire network or to the PLC via a serial terminal is possible.State-of-the-art high-speed optocouplers and DC/DC power supplies are used for safe galvanic isolation. Even the 1-Wire activity LED has an isolated design. The isolation prevents interference to and from the PC and reduces possible "electrosmog" in the building. The isolation also increases electrical safety.For the 1-Wire network, the 5V output voltage is 250mA max.Single 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended.LED indicators for power and activity.Note: The data interface is designed as a D-Sub socket.
Product number: 11302-T
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire bus coupler with RS232 (V24 interface), industrial version, galvanic isolation, DS2480
DIN rail adapter between PC and 1-Wire network, Serial to 1-WireIndustrial 1-Wire bus coupler with RS232 (V24) in industrial design with galvanic isolation between the data and 1-Wire bus interface.1-Wire bus coupler RS232 in DIN rail housing. With the 1-Wire Bus Coupler a fast and simple connection between computer and 1-Wire network or to the PLC via a serial terminal is possible.State-of-the-art high-speed optocouplers and DC/DC power supplies are used for safe galvanic isolation. Even the 1-Wire activity LED has an isolated design. The isolation prevents interference to and from the PC and reduces possible "electrosmog" in the building. The isolation also increases electrical safety.For the 1-Wire network, the 5V output voltage is 250mA max.Single 1-Wire sensors can be connected directly. For a 1-Wire network, the use of a 1-Wire hub is recommended.LED indicators for power and activity.
Product number: 11302-R
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire cable Bus coupler PLC
Adapter cable between 1-Wire bus coupler PLC (Part No. 11302-T) and a WAGO® PLC (750-841, 750-881, ...). The adapter cable is designed to connect the 1-wire bus coupler PLC (art.no.11302-T) and a WAGO® PLC, including models 750-841, 750-881 and other models with configuration and programming interfaces. The cable is designed for mounting the 1-Wire bus coupler PLC to the left of the PLC.A description of the library for Codesys (2.3) can be found here.A description of the connection between the 1-Wire bus coupler and the WAGO PLC controller can be found here.
Connection: 1 x D-SUB9 connector on pin row 4-PIN WAGO assignment (GND, RX and TX signals) Dimensions: Cable length approx. 15cm
Product number: 11312
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire cable set 2
3 different coloured cables (flexible), each 2 m long. Colours: red, black, white for wiring of 1-Wire modules Design: Cable (flexible) 0,5qmm length: each colour 2m
Colours: red, black, white
Product number: 11321
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire cable set-1
5 different coloured wires (YV wire), each 5 m long. Colours: red, black, blue, green, yellow for wiring of 1-Wire modules in the control cabinetDesign: wire (YV) 0.5qmm Length: 5m each colourColours: red, black, blue, green, yellow
Product number: 11313
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 1 RJ45 passive
Passive 1-Wire distributor with 6 outputs on RJ45 modular connectors
Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-wire cabling system based on network cables. This enables fast and cost-sensitive cabling.
Connections
6 x RJ45 sockets with 1-Wire standard assignment 12V, 5V, Data and GND (sockets connected in parallel)
Pressure connection terminal for connection to 1-wire hub or 1-wire bus coupler/1-wire controller
Assembly
top-hat rail
Miscellaneous
Internal filtering of the power supply
Scope of delivery
Distributor and operating instructions
Product number: 11140
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 2 RJ12 passive
1-Wire distributor with 6 outputs RJ12 modular connectors
Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling.
Connection 1-Wire Bus
Input push-in terminal* and RJ45 socket (connected in parallel)
Assignment bus connection
5V, 12, Data and GND (connection RJ45 and push-in terminal)
Connection temperature sensors
6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND)
Operating voltage
3 - 5.5VDC
Operating current
max. 500mA
Assembly
Designed for top hat rail
Miscellaneous
Internal filtering of the power supply
Scope of delivery
Distributor and operating instructions
*Push In terminals are screwless terminal connections.
Product number: 11141
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators.
Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling.
By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over.
You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables.
The distributor supplements the existing 1-Wire cabling system based on CAT patch cables.
*Push In terminals are screwless terminal connections.
Product number: 11162
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology
6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables.
This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over.
You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.
Product number: 11142
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor LIN 6 with grounding system
1-Wire distributor LIN 6 for cabling of 1-Wire sensors in linear topology with EMC system or shielding.6 inputs / outputs on push-in connectors plus ground connection / functional grounding.Distribution module
for easy cabling in linear bus topology of 1-Wire sensors in industrial and data center environment. Designed for cabling CAT5, CAT6 cables or system cables with 5 Aden plus shield.
This allows a fast and cost sensitive cabling.
Due to the use of Push In clamps you do not need a
screwdriver for mounting. Also the times of loosening
screws are over.
You can quickly and easily connect several 1-Wire distributors 6 LIN with each other linearly via system cable.The distributor complements the existing 1-Wire cabling system based on ESERA system cables.*Push In connectors are screwless clamp connections.
Product number: 11164
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Distributor, Star Topology/Cabling with Push-In Connector, 1-Wire Extender 7
1-Wire distributor for cabling of 1-Wire sensors and actuators in STAR/star or tree topology, with functional groundingy
6 outputs with push-in connector 1 input with push-in connectorPlug and Play distribution module for easy cabling in STAR topology / star bus cabling of 1-Wire sensors and actuators. Designed for cabling with CAT5, CAT6, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost-sensitive cabling. By using push-in connectors you do not need a screwdriver for mounting. Also the times of loosening screws are over with it.
Multiple 1-Wire Extender 7 distributors can be combined to extend the 1-Wire network. *Push-In connectors are screwless clamp connectors.
Product number: 11166
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Dual Digital Input, Board
1-Wire Dual Digital Input, Board
Unassembled printed circuit board for the construction of a 1-Wire digital input.
With the 1-Wire dual digital input module two inputs can be monitored independently of each other. A pump or lamp can be monitored as an example. The inputs are connected in parallel to the consumer to be monitored. The dual input module is designed for three variants:- 230V AC voltage - 24V DC voltage - 5V DC voltageConnection: screw terminals for 1-wire bus and input voltageSupply voltage: 1-Wire bus with 5V and 12VCurrent consumption: 5V approx.1mA, 12V approx. 5mA (both inputs active)Installation: Designed for control cabinet installation (top hat rail)Protection class: IIAssessories: Top hat rail housing (HUT 2)Scope of delivery: Unassembled board in industrial quality without components or housing. Building instructions per downloadNote: Small SMD components must be soldered on the board.
Product number: 11800
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Dual Reed contact, circuit board
1-Wire Dual Reed contact module, board
Unassembled printed circuit board for the assembly of a 1-Wire dual reed contact module.With the 1-Wire Dual Reed Contact Sensor Module two independent reed contacts (magnetic switches) can be monitored.The sensor can be used, for example, to monitor a window, door or garage door.
1-Wire interface
DS2413 Dual I/O
Dimensions
85,8x30,5mm
Connection
Screw terminals for 1-Wire bus and input voltage (up to 2.5qmm possible)
Supply voltage
1-Wire Bus with 5V and 12V
Power consumption
5V approx. 1mA, 12V approx. 5mA (both inputs active)
Isolation
Inputs electrically connected with 1-Wire bus
Installation
intended for top hat rail housing (switch cabinet installation)
Scope of delivery
Unassembled board in industrial quality without components or housing.Building instructions per download
Cable length between sensor and module
It is recommended to use max. 10m cable length.
Labelling
CE
Protection class
III
Note: SMD components must be soldered on the board
Product number: 11809
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Dual switching module 230V 5A, board
1-Wire switching module Dual 230V 5A top hat rail mounting, board
Unassembled printed circuit board for the assembly of a 1-Wire dual switch module.With the Dual Switching Module, two direct current or alternating current consumers can be switched independently of each other. By interconnecting the two channels it is possible to control awnings or tubular motors (roller shutters) (mech. relay version). The module is available in two versions.
1-Wire switch module Dual mech. relay By 5A
- Change-over relay for switching AC or DC consumers, all contacts of the relay are led outside- - control of tubular motors for awnings or roller shutters possible
1-Wire Switch Module Dual Electronic Load Relay, Solid State Relay 5A
Electronic load relays are the modern way to switch 230V consumers. The switching process is carried out by electronic switches, so there are no malfunctions and no wear and tear of switching contacts as with mechanical relay devices.- Gentle switching of AC 230V consumers - Increased service life of lamps due to zero-crossing control- Practically wear-free
Switching current
5A for mech. relay and electronic relay
Installation
The 1-Wire Dual switch module is designed for control cabinet installation (top-hat rail).
Power consumption
5V approx. 1mA, 12V (both outputs active) approx. 30mA
Supply voltage
1-Wire Bus, 5V and 12V
Connection
Screw terminals
Protection class
II
Accessories
DS2413 Dual I/O module, top hat rail housing (HUT 2), Elect. Load relays
Scope of delivery
Unassembled board in industrial quality without components or housing. Building instructions per downloadNote:SMD components must be soldered on the board.
Product number: 11801
Instantly available
Shipping until , if you place your order within the next .
Tip
Shipping until
1-Wire Dual switching module Pro 230V 10/16A with push-button interface
1-Wire Dual Switching Module Pro 10/16A Relay with Push Button Interface
Application
The 1-Wire Dual switching module can switch all types of DC or AC loads with up to 16/10A current. This allows all types of loads to be switched. The module is also ideally suited for lighting control in living areas, as the module is equipped with two push-button inputs in addition to the 1-wire interface. No external voltage is required for the button inputs. You can use it to switch the light on or off, for example, either by push-button or 1-Wire command. The advantage here is that the basic function, On-Off, is always given by push button. Automatic functions such as scenes or "Central Off" are added via the 1-Wire interface. The current relay and button status is reported via a 1-wire interface.
Features
The 1-Wire Dual Switching Module has two high power switching relays for switching two DC or AC loads.
You will always receive the current relay status via a 1-Wire interface, regardless of whether it is switched by a 1-Wire command, manual operation or an external pushbutton.
You also receive the status of the digital input (button interface) via the 1-Wire interface.
Product number: 11233
Instantly available
Shipping until , if you place your order within the next .
in production
1-Wire Gateway 10 Modbus RTU
Whichever system you want to use, the 1-Wire Gateway 10 with Modbus TCP is ready. If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gatway 10.
The 1-Wire Gateway 10 enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via Modbus protocol. The 1-Wire Gateway 10 represents a complete subsystem to your PLC control and manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. The 1-Wire Gateway 10 has extensive configuration and formatting options. Up to 30 1-Wire devices can be read out in parasitic and standard mode at 1-2 second intervals. The 1-Wire Gateway 11 Modbus 10 is designed for the operation of all 1-Wire network sizes.
Application
Autonomous subsystem with many automatic functions
Independent administration of 1-Wire network
Modbus and standard ASCII protocol
Data interface
Modbus RTU (RS485) slave, 4-pole connector (serial RS485) with switchable terminating resistor 120R
Configuration interface USB, Mini-USB 1.1 (VSP via FT232 interface)
Number of 1-Wire and iButton devices
30 pieces
Supported Chips
DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450 and all modules from ESERA-Automation
Supply voltage
9-30VDC, 0.5A max,
Output 1-Wire Interface
GND, Data, +5V max. 0.2A
Dimensions
32 x 71 x 90mm (WxHxD)
Protection type / protection class
III, IP20
Assembly
Designed for top hat rail
Connection
Screw terminals
Scope of delivery
Module (without power supply unit) and operating instructions
Unlike the 1-Wire controller "speaks" the 1-Wire Gateway 10 ASCII text and Modbus protocol.
Product number: 11324
Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Hub II AC Platine
1-Wire Hub II AC with integrated power supply unit
unpopulated printed circuit board for the construction of a 1-Wire Hub II AC.
The 1-Wire Hub II AC is the central module for building a 1-Wire network. Combination with all 1-Wire devices possible. Designed for control cabinet installation (top hat rail mounting).
Via the 1-Wire hub the 1-Wire bus is supplied with 5V and 12V voltage. If the output power of the 1-Wire hub is not sufficient, additional power can be supplied by an external power supply (15V - 24V). Options:- Voltage monitoring of the 5V and 12V voltages by 1-Wire - Voltage and current monitoring of the 5V and 12V by 1-Wire
Supply voltage
230VAC
Output
5V 0.1A, 12V 0.2A (sum of 5V and 12V 4.5W)
LED indicator
5V voltage, 1-Wire activity
Dimensions
85 x 77mm, intended for HUT4 top hat rail housing
Connection
Screw connection
Scope of delivery
Unassembled board in industrial quality without components or housing. Building instructions per download
Note: SMD components must be soldered on the board, depending on the assembly option.
Product number: 11812
Instantly available
Shipping until , if you place your order within the next .