UMS2205 Umweltmesssystem für Smart City Anwendung, 8 integrierte Sensoren in Industriequalität, NB-IoT und Ethernet Schnittstelle

Product information "UMS2205 Umweltmesssystem für Smart City Anwendung, 8 integrierte Sensoren in Industriequalität, NB-IoT und Ethernet Schnittstelle"

UMS2205 Umweltmessystem für Smart City Anwendung, 230V Ausführung
Leistungsfähiges und kompaktes Umweltmesssystem mit langlebigen und hochgenauen Sensoren
Extrem leistungsfähige und kompaktes Umweltmesssystem in Industrie Qualität für Smart City Anwendung.

Das Umweltmesssystem beinhaltet folgende Sensoren:

  • Feinstaubsensor, zertifizierter Sensor für Feinstaub mit 1µm, 2,5µm 4µm und 10µm
  • Stickoxid
  • Ozon
  • Luftruck
  • CO2
  • Luftfeuchte (rel.)
  • Taupunkt
  • Temperatur


Datenschnittstellen

  • NB-IoT (LTE Funktechnik) oder alternativ
  • LoRaWAN, Funkverbindung bis zu 15Km im Freifeld
  • WLAN mit Accespoint
  • Extrem Leistungsfähige 1-Wire Schnittstelle für bis zu 30 Sensoren. Jeder Sensor kann bis 5 Sensordaten liefern. Damit kann der EIoT 1000 bis zu 150 Sensordaten verarbeiten.

    Erweiterungsmöglichkeit für: 

    • Bodentemperatur, Frosterkennung
    • Sonneneinstrahlung, Helligkeitserkennung (Tag-Nachterkennung)
    • Regensensor
    • Windrichtung

      Windgeschwindigkeit


plus zusätzlich:

  • 4 x Digitale Eingänge für Alarmkontakte, Türkontaktschalter oder andere Schalter (Schliesserkontakte)
  • Industrie 1-Wire Bus mit 5V Versorgung
  • Spannungsversorgung des Geräts mit 100-230VAC

Der EIoT 1000 IoT Controller stellt zusätzlich zu den direkten Eingängen eine sehr leistungsfähige 1-Wire Schnittstelle zur Verwaltung von 30 1-Wire Bausteinen zur Verfügung. Über die 1-Wire Schnittstelle erkennt er selbstständig neue 1-Wire Bauteile und liefert zyklisch deren aktuelle Werte.

Das Gerät verfügt über umfangreiche Konfigurations- und Formatierungsmöglichkeiten.
Es können bis zu 30 1-Wire Bausteine im Parasitär- und Standardmodus im 2 Sekundentakt ausgelesen werden (Parasitär gibt es Systembedimg Limitierungen auf ca. 5-8 Temperatursensoren). Die 1-Wire Schnittstelle ist für den Betrieb von kleinen bis große 1-Wire Netzwerke vorgesehen.























1 wire connection: 3-wire connection (data, ground and 5V), parasitic operation not supported
1-Wire Interface:
  • Advanced 1-Wire bus functions with Plug and Play feature, Auto-E-Connect system
  • Parasitic operation is supported (2-wire operation without 5V power supply)
  • max. 30 1-Wire sensors or actuators
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Automatic library mapping: The appropriate library is mapped fully automatically for the sensor
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
Colour: gray
Connection type: Push In connector / connection
Data interface:
  • Ethernet: WLAN, access point (local WLAN network)
  • Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND))
  • LoRaWAN 868MHz (Long Range Wide Area Network)
  • MQTT (Message Queuing Telemetry Transport), machine-to-machine communication (M2M)
  • NB-IoT (Narrowband IoT), Low Power Wide Area Network
  • Text protocol according to ASCII standard
Design / Manufacturer: ESERA
Enclosure: ABS plastic, light gray (RAL7035)
Execution: 1-Wire controller, intelligent system interface
Function:
  • ECO Controller
  • Environmental sensors
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1): IP54
Internal sensors:
  • Dew point calculation, measuring range -40 to + 85°C
  • Humidity, relative, measuring range 0-100%, accuracy 3%
  • Temperature measuring range -40 to + 85°C, accuracy +/- 0.3°C
Measurement values:
  • Air humidity, relative humidity, rel. %
  • Barometric pressure (hPa), sea level (m)
  • Fine dust, 1µm, 2.5µm, 4µm, 10µm
  • Nitrogen oxide - in short nitrogen oxide, NO2, NOx
  • Ozone, O2
  • Temperature, °C
Mounting: Fixation by spring washer
Number of inputs / outputs:
  • 1-Wire Bus Interface
  • Normally open contact, alarm signalling contact (not potential-free)
Operating frequency range: 40Hz bis 60Hz
Plug and Play support , Auto-E-Connect Support: Yes
Power supply, Supply Voltage: Supply voltage, wide range for mains voltage, 85VAC to 264VAC, 120VDC to 370VDC
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Supported 1-Wire chips / 1-Wire sensors: 1-Wire Chips, Electronic keys, iButton: DS2401, DS1990, DS1963, DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450
Temperature range, operation: -25°C to +70°C, Extended temperature range 1, (E1)
Temperature range, storage: -25°C bis +70°C, Extended temperature range 1, (E1)
Version: Professional Version / Professional Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials
1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Power supply 12VDC 1A
Switching power supply 12V 1A, plug-in power supply AC/DC HNP12-120 Energy-saving plug-in power supply unit for supplying electronic assemblies - Power supply with European plug - wide range input 100-240VAC - short circuit and overload protection - insulation class 2 (protection class 2)- complies with Energy Star Level IVManufacturer: HN-PowerModel: HNP12Connection: Input: Euro plug, Output: Hollow plug Input: 100-- 240VAC, Output: 12V, 1A. 12W Output plug: 2.1 x 5.5 x 10 mm,inside positive, outside negative Connection: 1,5m Operating temperature: -5...+40°CEfficiency: 70%.

From €8.91*

Product number: 61051

iButton / RFID Fast Mode - Function extension for 1-Wire Controller / 1-Wire Gateway
iButton / RFID Fast Mode - Function extension for 1-Wire Controller / 1-Wire Gateway   Function: with this software function extension the 1-Wire Controller / 1-Wire Gateway queries connected / learned RFID key fobs / cards and/or iButtons extremely fast the status information of the RFID units or iButtons is then transferred to the higher-level control (software, such as IP-Symcon or FHEM) via the 1-Wire Controller / 1-Wire Gateway the "if-then" logic, e.g. when an RFID unit or iButton should trigger a function, is programmed in the software The 1-Wire controller / 1-Wire gateway does not perform any logic tasks in this function extension, i.e. no output for a door opener is triggered Applications: With this function extension you can implement a door opener function or time recording via RFID unit or iButton. You activate the function extension via the Config-Tool (configuration software of the 1-Wire controller / 1-Wire gateway). Instructions can be found in the Config-Tool in the help file  

From €29.61*

Product number: 40202

Tip
1-Wire Startset Pro 200 Temperature Ethernet
The 1-Wire Temperature Startset Pro 200 consists of the following components: 1-Wire Controller / Gateway Ethernet, 11319 1-Wire Multisensor: temperature, humidity, brightness surface-mounted living space Power supply 12V (61051) cable set (11321) All you need to do is mount the set, connect it to your IP network, assign IP address and port and read out temperature and humidity values using a terminal program, e.g. "Putty" or the "IP-Symcon"* software. No drivers are required, so it can be used* under all operating systems. Tip: Watch the support video on how to set up the 1-Wire Pro 200 starter kit. *For configuration a computer with Windows operating system is necessary * = Purchase software The product picture and product video are only exemplary. Please refer to the product description for the components included in the set.

From €197.01*

Product number: 11502

iButton / RFID Fast Mode - Function extension for 1-Wire Controller / 1-Wire Gateway
iButton / RFID Fast Mode - Function extension for 1-Wire Controller / 1-Wire Gateway   Function: with this software function extension the 1-Wire Controller / 1-Wire Gateway queries connected / learned RFID key fobs / cards and/or iButtons extremely fast the status information of the RFID units or iButtons is then transferred to the higher-level control (software, such as IP-Symcon or FHEM) via the 1-Wire Controller / 1-Wire Gateway the "if-then" logic, e.g. when an RFID unit or iButton should trigger a function, is programmed in the software The 1-Wire controller / 1-Wire gateway does not perform any logic tasks in this function extension, i.e. no output for a door opener is triggered Applications: With this function extension you can implement a door opener function or time recording via RFID unit or iButton. You activate the function extension via the Config-Tool (configuration software of the 1-Wire controller / 1-Wire gateway). Instructions can be found in the Config-Tool in the help file  

From €29.61*

Product number: 40202

Tip
1-Wire Controller 1, intelligent system interface
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers Note: If the device is not available, we recommend the new model, the ECO 10. Here you can find the ECO 10 controller. Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it. If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1). The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text. The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules). Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network. Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment. Data interface 1-Wire to Ethernet (TCP/IP or UDP) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 Supply voltage 9-30VDC Output 1-Wire Interface GND, Data, +5V max.0.2A Dimensions 2HP, 32 x 71x 90mm (WxHxD) Assembly Designed for top hat rail Connection Screw terminals Scope of delivery module (without power supply) and operating instructions. Program for configuration and readout as download

From €152.91*

Product number: 11319

Tip
1-Wire Gateway 10 Modbus RTU
Whichever system you want to use, the 1-Wire Gateway 10 with Modbus TCP is ready. If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gatway 10. The 1-Wire Gateway 10 enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via Modbus protocol. The 1-Wire Gateway 10 represents a complete subsystem to your PLC control and manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. The 1-Wire Gateway 10 has extensive configuration and formatting options. Up to 30 1-Wire devices can be read out in parasitic and standard mode at 1-2 second intervals. The 1-Wire Gateway 11 Modbus 10 is designed for the operation of all 1-Wire network sizes. Application Autonomous subsystem with many automatic functions Independent administration of 1-Wire network Modbus and standard ASCII protocol Data interface Modbus RTU (RS485) slave, 4-pole connector (serial RS485) with switchable terminating resistor 120R Configuration interface USB, Mini-USB 1.1 (VSP via FT232 interface) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450 and all modules from ESERA-Automation Supply voltage 9-30VDC, 0.5A max, Output 1-Wire Interface GND, Data, +5V max. 0.2A Dimensions 32 x 71 x 90mm (WxHxD) Protection type / protection class III, IP20 Assembly Designed for top hat rail Connection Screw terminals Scope of delivery Module (without power supply unit) and operating instructions Unlike the 1-Wire controller  "speaks" the 1-Wire Gateway 10 ASCII text and Modbus protocol.

From €72.81*

Product number: 11324-GB

1-Wire Gateway 10 Modbus RTU
Whichever system you want to use, the 1-Wire Gateway 10 with Modbus TCP is ready. If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gatway 10. The 1-Wire Gateway 10 enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via Modbus protocol. The 1-Wire Gateway 10 represents a complete subsystem to your PLC control and manages the 1-Wire network completely autonomously. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the Modbus and ASCII interface. The 1-Wire Gateway 10 has extensive configuration and formatting options. Up to 30 1-Wire devices can be read out in parasitic and standard mode at 1-2 second intervals. The 1-Wire Gateway 11 Modbus 10 is designed for the operation of all 1-Wire network sizes. Application Autonomous subsystem with many automatic functions Independent administration of 1-Wire network Modbus and standard ASCII protocol Data interface Modbus RTU (RS485) slave, 4-pole connector (serial RS485) with switchable terminating resistor 120R Configuration interface USB, Mini-USB 1.1 (VSP via FT232 interface) Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic keys (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450 and all modules from ESERA-Automation Supply voltage 9-30VDC, 0.5A max, Output 1-Wire Interface GND, Data, +5V max. 0.2A Dimensions 32 x 71 x 90mm (WxHxD) Protection type / protection class III, IP20 Assembly Designed for top hat rail Connection Screw terminals Scope of delivery Module (without power supply unit) and operating instructions Unlike the 1-Wire controller  "speaks" the 1-Wire Gateway 10 ASCII text and Modbus protocol.

From €265.41*

Product number: 11324

1-Wire Gateway 20 Modbus TCP
Via the Modbus Gateway you can integrate inexpensive sensors and actuators into your PLC. Whichever system you want to use, the 1-Wire Gateway 20 Modbus TCP is ready. If you have a PLC control system, for example from WAGO, Siemens, B&R, Beckhoff, Kunbus, or ..., no problem. All systems can access inexpensive 1-Wire sensors and actuators via the 1-Wire Gateway 20 Modbus TCP. 1-Wire Gateway 20 Modbus TCP from ESERA is the product of the year 2017 Read the whole article here. The 1-Wire Gateway 20 Modbus TCP enables the integration of inexpensive 1-Wire sensors without special knowledge to all industrial control systems via MODBUS protocol. The 1-Wire Gateway 20 Modbus TCP represents a complete subsystem to your PLC control and manages the 1-Wire network completely independently. The system automatically recognizes new 1-Wire modules and components, interrogates them cyclically and converts the data. The current values are available via the MODBUS and ASCII interface. The 1-Wire Gateway 20 has extensive configuration and formatting options.Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors).The 1-Wire Gateway 20 is designed for all sizes of 1-Wire networks. Application Autonomous subsystem with many automatic functions Independent administration of 1-Wire network Modbus and standard ASCII protocol Data interface Modbus TCP (10/100MBit) Slave ASCII text protocol according to ESERA specification Number of 1-Wire and iButton devices 30 pieces Supported Chips DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 andDS2450 and almost all modules from ESERA-Automation Supply voltage 15-30VDC, max. 1.0A Output 1-Wire Interface GND, Data, 5V max. 0.2A, 12V max. 0.2A Dimensions 100 x 71 x 90mm (WxHxD) Protection type / protection class III, IP20 Assembly Designed for top hat rail Connection Screw terminals Scope of delivery Module (without power supply unit) and operating instructions In contrast to the 1-Wire controller devices, the 1-Wire gateway devices "speak" two languages, ASCII text and Modbus protocol.

From €343.71*

Product number: 11337

Door opener via iButton / RFID - Functional extension for 1-Wire Controller / 1-Wire Gateway
Door opener / Access system via iButton / RFID - Functional extension for 1-Wire Controller / 1-Wire Gateway Features: Independent access system for electric doors / door opener via iButton and RFID key (RFID via RFID to 1-Wire reader, Art. No. 11614) the 1-Wire Controller / 1-Wire Gateway takes over the control of an electric door opener when an RFID or iButton key is contacted or brought into the area of the RFID reader. Additionally, an additional feedback output for an LED display can be controlled. Internal relays of the 1-Wire Controller 2 or any 1-Wire module in the 1-Wire network can be used as control output Door open time can be set in a wide range (1 - 65000 seconds) Additional display output for feedback via LED displays Electrical devices can also be activated for a time up to 65000 seconds incl. iButton / RFID Fast Mode function extension NO superordinate software / control system is required for the door opener function max. 30 keys can be used. If further 1-Wire devices are controlled, correspondingly fewer keys Application: With this function extension for 1-Wire controller / 1-Wire gateway, a door opener function or access system can be implemented via iButton Release of electrical devices for a certain time, e.g. for TV, beamer or game consoles (child safety lock)

From €37.71*

Product number: 40203