PLUG and PLAY
USER FRIENDLY
SECURE
DURABLE
ECO FRIENDLY

EIoT 1000 LoRaWAN / WLAN IoT Controller Pro, Digital Input, 100 - 230V Supply

Product information "EIoT 1000 LoRaWAN / WLAN IoT Controller Pro, Digital Input, 100 - 230V Supply"

Overview

EIoT 1000 LoRaWAN/WLAN Controller for IoT Applications Ethernet, digital input function, 1-Wire bus system for autonomous management of up to 30 1-Wire sensors and actuators Plug and Play System

Description

EIoT 1000, 230V version
Industrial IoT controller for up to 30 sensors, the intelligent system interface to all IoT controllers.
Extremely powerful industrial 1-Wire controller with integrated digital input function for "Internet of Things" applications in the industrial environment..

  • Extremely powerful 1-Wire interface for up to 30 sensors. Each sensor can provide up to 5 sensor data. Thus the EIoT 1000 can process up to 150 sensor data.
  • Power supply 100-230VAC

plus additional:

  • 4 x digital inputs for alarm contacts, door contact switches or other switches (normally open contacts)
  • Industrial 1-Wire bus with 5V supply
  • Power supply of the device with 100-230VAC

The EIoT 1000 is a professional IoT controller with digital inputs and industrial 1-Wire interface. It allows the direct polling of digital inputs, e.g. fault outputs of IT devices and the integration of 1-Wire sensors and actuators.
The device can be ideally connected as a subsystem for all kinds of controllers, PLC or PC systems without special knowledge. It is a classic device for IoT (Internet of Things) applications in the Industrial IoT (IIoT) environment.

In addition to the direct inputs, the EIoT 1000 IoT controller provides a very powerful 1-Wire interface for managing 30 1-Wire devices. It automatically detects new 1-Wire devices via the 1-Wire interface and cyclically supplies their current values.

Communication with the EIoT 1000 takes place via an extremely powerful Modbus TCP interface and or via a readable, simple text-based protocol (ASCII characters).
The device has extensive configuration and formatting capabilities.
Up to 30 1-Wire devices can be read in parasitic and standard modes at 2 second intervals (parasitic has system limitations of approximately 5-8 temperature sensors). The 1-Wire interface is intended for operation of small to large 1-Wire networks.



1-Wire bus, supported devices: DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406,DS2413, DS2408, DS2423, DS2438 and DS2450
Mounting: Intended for wall mounting indoors or weather-protected outdoors

Properties

1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic library mapping: The appropriate library is mapped fully automatically for the sensor
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Sensorfinder Function: LED display for sensor identification. Let the status LED on the sensor / actuator flash for identification.
  • Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
Internal sensors:
  • Dew point calculation, measuring range -40 to + 85°C
  • Humidity, relative, measuring range 0-100%, accuracy 3%
  • Temperature measuring range -40 to + 85°C, accuracy +/- 0.3°C
Mounting:
  • Outdoor / weather-protected area
  • Wall mounting
Number of inputs / outputs: 4 - channel output
Data interface:
  • Text protocol according to ASCII standard
  • Ethernet (LAN): TCP/IP, UDP
  • Ethernet: WLAN, access point (local WLAN network)
  • LoRaWAN 868MHz (Long Range Wide Area Network)
  • Modbus/TCP (Ethernet 10/100MBit)
Function: Digital Input
1-Wire Interface: max. 30 1-Wire sensors or actuators
Display: No
Versions: Professional Version / Professional Series
Power supply, Supply Voltage: Supply voltage, wide range for mains voltage, 110VAC to 250VAC
Connection type: Push In terminal block
Enclosure: ABS plastic, light gray (RAL7035)
Colour: gray
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Design / Manufacturer: ESERA

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessories

Tip
Shipping until
ECO 503 Pro central unit, Industrial Ethernet/LAN switching actuator
The ECO 503 Pro central unit, Industrial Ethernet/LAN switching actuator can be used as an IT switching actuator, IoT cloud switching module and industrial LAN relay module. The switching actuator offers a high switching capacity of 8x16A* and can therefore control complete luminous flux circuits, larger machine or luminaire groups (without dimmers). The integrated high-performance relays can be controlled either by software commands or by 8 digital inputs. The digital inputs are designed for operation with a low voltage of 10-30 VDC and are optimized for push-button operation. The ECO503 central unit supports 4 data protocols: Modbus/TCP, ASCII text, MQTT (with optional SSL encryption). These protocols can communicate in parallel on up to 4 data channels. The device has a web server for switching, configuration and firmware updates. The web server can be accessed via LAN or the access point (activated at the touch of a button). The ECO 503 switching actuator was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which ensures the stability and reliability of the system. Extensive free software support is available. The ECO 503 Pro central processing unit offers a wide range of possible uses and can be seamlessly integrated into various control and automation technology applications. *Note: The specification "8x16A" means that the switching actuator has a total of 8 outputs, each of which can switch a maximum current of 16 amps. HIGHLIGHTS 8 High-performance switching channels (up to 10/16A* switching current), 8 digital inputs for direct control of the switching channels Web server and LAN interface/access point for data, configuration, debug and firmware updates Multi-protocol capable: HTML, Modbus/TCP, MQTT and ASCII Robust and low-maintenance industrial design, can be used for the extended temperature range from -5°C to 50°C regardless of manufacturer Native programming: without Linux and without unknown libraries Cost savings thanks to simple installation and fast commissioning Applications Industrial plant and machinery Smart Building IoT and M2M applications Energy optimization for all consumers, rooms and buildings through central control Switching/control of loads up to 16Amp switching current (switching channels are separately fused) Optional equipment Personalization and branding possible Basis for extensions, e.g. more channels, analog in/out, energy detection, etc.

From €287.91*

Product number: 11618-24

Instantly available
Shipping until , if you place your order within the next .
Tip
Shipping until
ECO 502 Pro central unit Industrial 1-Wire sensor gateway, Modbus/RTU
The ECO 502 central processing unit is a powerful industrial 1-Wire sensor gateway of the latest generation for plant and system system monitoring. The gateway is equipped with an access point and web server. State-of-the-art, universal sensor interface for manufacturer-independent 1-Wire use in all modern machines, systems and consumers. Up to 30 sensors can be connected to the gateway fully automatically to the 1-Wire bus via the Auto-E-Connect plug-and-play system. A wide range of measurement sensors is available, such as temperature, humidity, dew point, air quality (CO2, VOC or particulate matter), additionally for glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server. The web server can be accessed via LAN or via the access point (activation at the touch of a button) This system was developed as a low-maintenance industrial device, without Linux and with its own native programming. was implemented. No unknown libraries are used, which ensures the stability stability and reliability of the system. The WLAN and LAN interface can be used for communication with up to 3 data connections via Modbus/TCP, MQTT, ASCII text protocol. Extensive free software support is available. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -5°C to 50°C Applications Industrial plants Mechanical engineering Building management, IoT and M2M Energy optimization in many areas of application Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible

From €269.99*

Product number: 11608-24

Instantly available
Shipping until , if you place your order within the next .
Tip
New
Shipping until
ECO 531 Central Unit Industrial Multizone 1-Wire Sensor-Actor-Gateway
The ECO 531 central device/gateway is a modern system bus interface for the comprehensive monitoring and control of systems. It integrates up to 30 sensors and actuators via the Industrial 1-Wire bus and the Auto-E-Connect plug-and-play system. The ECO central units are low-maintenance industrial devices that have been the standard for 1-Wire bus systems for over 10 years, offer stability and meet a high "security by design" standard. The gateway can be controlled in parallel by PLC controllers, cloud applications and text protocols through BMS and media control systems. The simple installation of complex networks is facilitated by the integrated 1-Wire Zone feature. ESERA offers a wide range of sensors and actuators for the gateway. User-friendliness is reflected in the intuitive and simple configuration, software updates and provision of data via the web server, accessible via LAN or the access point that can be activated at the touch of a button. HIGHLIGHTS Three 1-wire bus zones, fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown libraries Device security through secure boot and updates with encrypted SSL certificate Robust and low-maintenance industrial design with extensive device protection, suitable for extended temperature range from -20°C to 50°C Applications Suitable for complex 1-wire networks: Industrial plants Mechanical engineering Building management, IoT and M2M, silo monitoring Energy optimization in many application areas, can be used regardless of manufacturer Optional equipment Ultrafast iButton or RFID Read function for access or security authentication TPM (Trusted Platform Module) hardware for secure boot and SSL certificates Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization and branding possible

From €332.70*

Product number: 11624-24

Instantly available
Shipping until , if you place your order within the next .
Tip
Shipping until
ECO 501 Pro central unit Industrial 1-Wire sensor gateway, MODBUS/TCP, MQTT
The ECO 501 central unit is a powerful industrial 1-wire sensor gateway of the latest generation for plant and system monitoring. The gateway has an access point and web server. State-of-the-art, universal sensor interface for manufacturer-independent 1-Wire use in all modern machines, systems and consumers. Up to 30 sensors can be connected to the gateway fully automatically via the 1-Wire bus using the Auto-E-Connect plug-and-play system. A wide range of measurement sensors are available, such as temperature, humidity, dew point, air quality (CO2, VOC or fine dust), as well as glass breakage and smoke detectors. The configuration, software updates, sensor and production data of the connected sensors are conveniently made available via the web server, which can be accessed via LAN or via the access point (activation at the touch of a button) This system was developed as a low-maintenance industrial device by implementing it without Linux and with its own native programming. No unknown libraries are used, which guarantees the stability and reliability of the system. HIGHLIGHTS Fully automatic Auto-E-Connect plug-and-play system for up to 30 sensors Web server and access point for data, configuration, debug and firmware updates Data interface for Modbus/TCP, MQTT and ASCII Native programming, without Linux and without unknown librariesDevice security through secure boot and updates with encrypted SSL certificate Applications Industrial plants Mechanical engineering Building management, IoT and M2M Energy optimization in many areas of application Optional equipment Ultrafast iButton or RFID Read function for access or security authentication Optional firmware versions, e.g. for 1-wire memory (EEPROM) and read iButton without programming Customization an branding possible

From €287.91*

Product number: 11607-24

Instantly available
Shipping until , if you place your order within the next .
Tip
Shipping until
ECO 120 Pro central unit Industrial 1-Wire gateway
The 3rd generation of the ECO 120 Pro Industrial 1-Wire Gateway is an ESERA further development of the 1-Wire high-performance sensor interface. It is optimized for operation on your desk as a programming interface or in the laboratory as an innovative measuring system. Up to 30 sensors can be connected to the ECO 120 PRO fully automatically via the Industrial 1-Wire bus and the Auto-E-Connect Plug and Play system. The ESERA Auto-E-Connect system is an extension of the 1-Wire bus standard and has been registered as a German and European patent by ESERA GmbH. A wide range of sensors can be connected via the 1-Wire bus interface: e.g. for temperature, humidity, dew point, air quality (VOC or fine dust), gases (e.g. CO2 or CO) or alarm signaling contacts. Thanks to the Auto-E-Connect support, product data can be read out from all sensors in real time. Each sensor can provide up to 5 data values. This means that the ECO 120 PRO can provide a maximum of 150 sensor data to your control system or PLC. The ESERA Config Tool and the ECO-Dashboard 100 provide you with extensive software support. To ensure continuous and reliable operation in an industrial environment, the ECO 120 PRO is powered by a 12V plug-in power supply unit. HIGHLIGHTS Auto-E-Connect Level I to III: fully automatic plug-and-play system for up to 30 sensors, Fast readout of all devices in a 2 second cycle USB 2.0 interface for data, configuration, debug and firmware updates Convenient desktop device on rubber feet, with power supply via plug-in power supply unit Robust industrial design with extensive bus and device protection, Suitable for extended temperature range from -5° to 50°C Optional equipment Ultrafast iButton or RFID read function for access or security authentication Coated electronics (conformal coating) for high operational reliability under permanently high or strongly fluctuating humidity conditions Data logger function for long-term measured value recording or logging

From €242.91*

Product number: 11606-12

Instantly available
Shipping until , if you place your order within the next .
Shipping until
ECO 608 Industry IoT/IIoT - Safety central unit / sensor gateway
The ECO 608 industrial IoT/IIoT central unit is a secure, high-performance sensor gateway of the latest generation, designed for monitoring critical plants, systems and infrastructures. The ECO 608 is an intelligent and fully automated gateway to your system. The direct option of secure data transmission to platforms such as Microsoft Azure IoT or SAP IoT using MQTT SSL ensures efficient communication* The central unit defends itself against hacker attacks (Dos/DDoS attacks) with the help of its high-performance LAN interface*. ESERA's patented plug-and-play system (Auto-E-Connect) enables the automatic connection of up to 30 sensors. A wide range of sensors is available for this device. In addition to the sensor bus interface, the ECO 608 Gateway offers 8 digital inputs for monitoring doors, windows or other devices with alarm signal output. Maximum adaptability is made possible by the configuration options via the web server. The internal access point is activated for 30 minutes simply by pressing a button. Flexibility and adaptability are the hallmarks of the ECO 608 industrial IoT/IIoT security central unit. The ECO 608 gateway also has an output for alarm messages or for controlling electrical loads. In combination with the integrated climate management, heating and ventilation systems can be controlled. *Only on an NDA and project basis HIGHLIGHTS Security sensor gateway with secure boot and SSL-encrypted updates LAN MQTT and SSL Modbus/TCP interface for up to 7 data connections 8x Digital-Input,1x Digital-Output WLAN, web server and access point for configuration, debugging and firmware updates ESERA-patented plug-and-play interface for up to 30 sensors Robust industrial design with integrated climate management and extended temperature range Applications Control cabinet temperature monitoring Environmental and climate monitoring, leakage detection Data Center Monitoring of production systems, machines and plants Cold and heat chains in the food industry Vehicle monitoring: cargo space, localization Monitoring of cold stores and warehouses

From €503.91*

Product number: 11605

Instantly available
Shipping until , if you place your order within the next .
Shipping until
Door opener via iButton / RFID - Functional extension for 1-Wire Controller / 1-Wire Gateway
Door opener / Access system via iButton / RFID - Functional extension for 1-Wire Controller / 1-Wire Gateway Features: Independent access system for electric doors / door opener via iButton and RFID key (RFID via RFID to 1-Wire reader, Art. No. 11614) the 1-Wire Controller / 1-Wire Gateway takes over the control of an electric door opener when an RFID or iButton key is contacted or brought into the area of the RFID reader. Additionally, an additional feedback output for an LED display can be controlled. Internal relays of the 1-Wire Controller 2 or any 1-Wire module in the 1-Wire network can be used as control output Door open time can be set in a wide range (1 - 65000 seconds) Additional display output for feedback via LED displays Electrical devices can also be activated for a time up to 65000 seconds incl. iButton / RFID Fast Mode function extension NO superordinate software / control system is required for the door opener function max. 30 keys can be used. If further 1-Wire devices are controlled, correspondingly fewer keys Application: With this function extension for 1-Wire controller / 1-Wire gateway, a door opener function or access system can be implemented via iButton Release of electrical devices for a certain time, e.g. for TV, beamer or game consoles (child safety lock)

From €37.71*

Product number: 40203

Instantly available
Shipping until , if you place your order within the next .
Shipping until
iButton / RFID Fast Mode - Function extension for 1-Wire Controller / 1-Wire Gateway
iButton / RFID Fast Mode - Function extension for 1-Wire Controller / 1-Wire Gateway   Function: with this software function extension the 1-Wire Controller / 1-Wire Gateway queries connected / learned RFID key fobs / cards and/or iButtons extremely fast the status information of the RFID units or iButtons is then transferred to the higher-level control (software, such as IP-Symcon or FHEM) via the 1-Wire Controller / 1-Wire Gateway the "if-then" logic, e.g. when an RFID unit or iButton should trigger a function, is programmed in the software The 1-Wire controller / 1-Wire gateway does not perform any logic tasks in this function extension, i.e. no output for a door opener is triggered Applications: With this function extension you can implement a door opener function or time recording via RFID unit or iButton. You activate the function extension via the Config-Tool (configuration software of the 1-Wire controller / 1-Wire gateway). Instructions can be found in the Config-Tool in the help file  

From €29.61*

Product number: 40202

Instantly available
Shipping until , if you place your order within the next .

Related products

Shipping until
1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire Distributor, Star Topology/Cabling with Push-In Connector, 1-Wire Extender 7
1-Wire distributor for cabling of 1-Wire sensors and actuators in STAR/star or tree topology, with functional groundingy 6 outputs with push-in connector 1 input with push-in connectorPlug and Play distribution module for easy cabling in STAR topology / star bus cabling of 1-Wire sensors and actuators. Designed for cabling with CAT5, CAT6, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost-sensitive cabling. By using push-in connectors you do not need a screwdriver for mounting. Also the times of loosening screws are over with it. Multiple 1-Wire Extender 7 distributors can be combined to extend the 1-Wire network. *Push-In connectors are screwless clamp connectors.

From €38.69*

Product number: 11166

Instantly available
Shipping until , if you place your order within the next .
Shipping until
1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Instantly available
Shipping until , if you place your order within the next .
Shipping until
EOS 100 Multisensor Pro Outdoor
Multisensor Pro 100 Outdoor for humidity and temperature The EOS 100 is a professional outdoor multisensor of the latest generation for building, system and infrastructure monitoring.The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges. The EOS 100 has internal power and status LED indicators. The sensor finder LED function allows the sensor to be found quickly in large networks. TheESERA Plug and Play system, called Auto-E-Connect, installs the EOS 100 fully automatically in ECO controllers. The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered by ESERA GmbH as a German and European patent.The installation is done in a few minutes by Push In connection terminals.With a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.Highlights: Outdoor multisensor, waterproof High measurement accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) LED indicators for power, status and sensor finder Auto-E-Connect functions Processing of sensor values, therefore no complex formulas necessary Shapely industrial housing Universal outdoor sensor for IoT, industry and building automation

From €98.91*

Product number: 11169

Instantly available
Shipping until , if you place your order within the next .
Shipping until
MSp203 Multisensor Pro Smoke, temperature, rel. humidity
MSP203 Multisensor Pro Smoke, Humidity and Temperature Highlights: Wall mounting, e.g. in a control cabinet High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low power consumption Processing of the sensor values, therefore no complex formulas necessary Function:With the MSP203 Smoke Sensor you can implement an early warning system for developing fires.The MSP 203 Environment - Multisensor quickly detects smoke / fume and measures temperature, relative humidity and dew point with high accuracy. dew point.The sensor MSP 203 is an industrial environmental multisensor of the newest generation and is designed for control cabinet, system and infrastructure monitoring. monitoring.The sensor has LED indicators for power, status and sensor function.The Sensor Finder LED function allows the sensor to be found quickly in large networks. large networks. Per ESERA Plug and Play System, called Auto-E-Connect, the the MSP 203 is installed fully automatically in ECO controllers.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire Bus standard, has been registered by ESERA GmbH as German and European patent pending.The installation is done in a few minutes by the dual RJ45 connector system for patch cables. Due to a sophisticated EMC and grounding concept the environmental multisensor for industrial environments is well prepared for a reliable reliable operation. Horizontal air flow measurement direction, detection of air flow into or out of the control cabinet Intended for mounting on surfaces, e.g. in the control cabinet

From €188.91*

Product number: 11171

Instantly available
Shipping until , if you place your order within the next .