MSp203 Multisensor Pro Smoke, temperature, rel. humidity

Product information "MSp203 Multisensor Pro Smoke, temperature, rel. humidity"

MSP203 Multisensor Pro Smoke, Humidity and Temperature

Highlights:

  • Wall mounting, e.g. in a control cabinet
  • High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors)
  • Low power consumption
  • Processing of the sensor values, therefore no complex formulas necessary

Function:
With the MSP203 Smoke Sensor you can implement an early warning system for developing fires.

The MSP 203 Environment - Multisensor quickly detects smoke / fume and measures temperature, relative humidity and dew point with high accuracy. dew point.

The sensor MSP 203 is an industrial environmental multisensor of the newest generation and is designed for control cabinet, system and infrastructure monitoring. monitoring.

The sensor has LED indicators for power, status and sensor function.
The Sensor Finder LED function allows the sensor to be found quickly in large networks. large networks.
Per ESERA Plug and Play System, called Auto-E-Connect, the the MSP 203 is installed fully automatically in ECO controllers.

The ESERA Auto-E-Connect system, which is an extension of the 1-Wire Bus standard, has been registered by ESERA GmbH as German and European patent pending.

The installation is done in a few minutes by the dual RJ45 connector system for patch cables.
Due to a sophisticated EMC and grounding concept the environmental multisensor for industrial environments is well prepared for a reliable reliable operation.
Horizontal air flow measurement direction, detection of air flow into or out of the control cabinet Intended for mounting on surfaces, e.g. in the control cabinet

1-Wire Interface: DS2438 instruction set with Plug and Play support (Auto-E-Connect Functions)
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Automatic library mapping: The appropriate library is mapped fully automatically for the sensor
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
  • Sensorfinder Function: LED display for sensor identification. Let the status LED on the sensor / actuator flash for identification.
Colour: gray
Connection type:
  • Push In connector / connection
  • RJ45 connector / connection, 8 pin
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND), Functional Earth (FE))
Design / Manufacturer: ESERA
Dimensions: 120 x 80 x 35 mm (LxWxH)
Enclosure: ABS plastic, light gray (RAL7035)
Execution:
  • 3 pin connector
  • 5 pin connector
Function:
  • Environmental sensors
  • Multisensor, temperature, humidity
  • Sensoric
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP20
  • Protection class III with functional grounding
Measurement values:
  • Air humidity, relative humidity, rel. %
  • Smoke, fire, fine dust
  • Temperature, °C
Mounting:
  • Desktop, mobile application
  • Housing
  • Wall mounting
  • wall mount
Note: Compatibility: Unfortunately the Loxone 1-Wire Extension does not support the functionality of this state of the art sensor. Here we recommend the use of an ECO Controller as interface.
Plug and Play support , Auto-E-Connect Support: Yes
Power Consumption: 0.1W, 20mA at 5V
Power supply, Supply Voltage: System supply, 5VDC (1-Wire main voltage)
Protection circuit:
  • Enhanced ESD protection with ±4kV according to IEC 61000-4
  • Overvoltage protection for the voltage supply / power supply
  • Reverse polarity protection for voltage supply / power supply
  • Signal line overvoltage protection (1-Wire Protector) provides protection against high voltage faults up to 28VDC
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -25°C to +70°C, Extended temperature range 1, (E1)
Temperature range, storage: -25°C bis +70°C, Extended temperature range 1, (E1)
Version: Professional Version / Professional Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials
1-Wire distributor 1 RJ45 passive
Passive 1-Wire distributor with 6 outputs on RJ45 modular connectors Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-wire cabling system based on network cables. This enables fast and cost-sensitive cabling. Connections 6 x RJ45 sockets with 1-Wire standard assignment 12V, 5V, Data and GND (sockets connected in parallel) Pressure connection terminal for connection to 1-wire hub or 1-wire bus coupler/1-wire controller Assembly top-hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions

From €28.71*

Product number: 11140

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor LIN 6 with grounding system
1-Wire distributor LIN 6 for cabling of 1-Wire sensors in linear topology with EMC system or shielding.6 inputs / outputs on push-in connectors plus ground connection / functional grounding.Distribution module for easy cabling in linear bus topology of 1-Wire sensors in industrial and data center environment. Designed for cabling CAT5, CAT6 cables or system cables with 5 Aden plus shield. This allows a fast and cost sensitive cabling. Due to the use of Push In clamps you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can quickly and easily connect several 1-Wire distributors 6 LIN with each other linearly via system cable.The distributor complements the existing 1-Wire cabling system based on ESERA system cables.*Push In connectors are screwless clamp connections.

From €35.01*

Product number: 11164

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

MSP100 Multisensor Pro, Door Sensor, Data Center, gray
Multisensor Pro 100 for ESERA Data Center Environmental Measurement SystemHumidity and temperature, door sensor,for mounting on control cabinet doors, gray version Highlights: Horizontal ventilation High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low current consumption Processing of sensor values, therefore no complex formulas necessary Shapely door / wall housing gray Function: With the Multisensor Pro 100 for temperature and humidity is a simple monitoring of the indoor climate in the data center. The Multisensor Pro 100 has a shapely white sensor housing for mounting on control cabinet doors

From €161.91*

Product number: 11167-GR

Available, delivery time 1-5 days, depending on the carrier

MSP100 Multisensor Pro, Door Sensor, Data Center, Black
Multisensor Pro 100 for ESERA Data Center environmental measuring system, door sensorHumidity and temperature for mounting on control cabinet doors, black version. Highlights: Horizontal ventilation High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low power consumption Processing of sensor values, therefore no complex formulas necessary Elegant door / wall housing black Function: With the Multisensor Pro 100 for temperature and humidity is a simple monitoring of the indoor climate in data centers. The Multisensor Pro 100 has an attractive white sensor housing for mounting on control cabinet doors.

From €161.91*

Product number: 11167-SW

Available, delivery time 1-5 days, depending on the carrier

Tip
1-Wire Multisensor Air Quality Humidity and Temperature Pro I
Elegant multisensor for air quality, humidity and temperature Pro 1 with KI - technologywith "air quality traffic light for private and commercial use This is the first multisensor from ESERA in which an AI (machine learning) is used for the automatic calibration of the sensor. This is a small milestone in the field of VOC sensors and for ESERA.The advantage for you is that the calibration of the sensor is performed fully automatically and autonomously. This makes the measurement result more accurate and always adapted to the individual environmental conditions. It is therefore really "YOUR" sensor.The sensor can be be used in stand-alone operation or with bus connection.With the 1-Wire Multisensor a simple monitoring of the room climate is possible. It is one of the few sensors on the market that combines all three sensor types in one stylish sensor housing. The air quality is displayed in the form of a "traffic light" with green, yellow and red indicators. The "traffic light" is switched off in the dark by an integrated light sensor. This makes the sensor also suitable for children's rooms and bedrooms.

From €137.61*

Product number: 11151

Available, delivery time 1-5 days, depending on the carrier

1-Wire Multisensor Air Quality Humidity and Temperature Sensor Pro II
Elegant Multisensor for air quality, humidity and temperature Pro II for 1-Wire bus system without "Air quality traffic light", for professional applications, such as public institutions, authorities etc. - High measuring accuracy for temperature, humidity (300 - 400% more accurate than standard 1-Wire sensors) and air quality - low power consumption - processing of the sensor values, therefore no complex formulas necessary - - wall sensor (surface mounting) With the multi-sensor for air quality (or called air quality), temperature and humidity, it is easy to monitor the indoor climate. It is one of the few sensors on the market that combines all three types of sensors in one attractive sensor housing. The air quality sensor used operates on the basis of a VOC mixed gas sensor. With the help of the air quality sensor, a statement on the current air quality and advice on ventilation can be given. With the help of the humidity sensor, the humidity conditions in the room are monitored and a warning about possible mould growth could be issued via the evaluation software. All sensors together make up an important sensor for heating and ventilation systems and are a main component of individual room control. In combination with switch modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated. 1-Wire components DS2438 Multisensor for temperature, humidity and air quality Temperature Temperature sensor with very high accuracy Measuring range - 40°C to +60°C (limited by the housing, sensor itself - 40°C to +125°C) Accuracy +/- 0.3° in the range of -10°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity Sensor with high accuracy Air humidity sensor Capacitive sensor Measuring range air humidity 0 -100% rel. air humidity Accuracy +/-3,5 % Repeatability 0,5% Resolution 12 bit, approx. 0.1% humidity Air quality VOC sensor with very high accuracy and low energy consumption Air Quality Sensor Type Mixed Gas Sensor (VCO Sensor) Measuring range air quality 400 - 3500 ppm (CO2 equivalent) Accuracy +/- 5%, depending on the air composition 1-Wire connection 3 - wire connection (data, ground and 5V), parasitic operation not supported Operating voltage 5 V= (+10%/-20%) Power consumption approx. 25mA Connection push-in terminal Dimensions (outside) 80 x 80 x 32mm (LxWxH) Note: Unfortunately, the Loxone 1-Wire Extension does not support the functional range of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with the article number 11127, which we produce on request.

From €177.21*

Product number: 11152

Available, delivery time 1-5 days, depending on the carrier