MSP200 Multisensor Pro, Wall mount

Product information "MSP200 Multisensor Pro, Wall mount"

MSP 200, System monitoring per Environment - Multisensor

Multisensor Pro 200 for ESERA Data Center environmental measuring system, humidity and temperature

Description

  • The MSP 200 is an industrial environmental multisensor of the latest generation for building, system and infrastructure monitoring.
  • The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges.
  • The MSP 200 has power and status LED indicators.
  • The sensor finder LED function allows the sensor to be found quickly in large networks.
  • The ESERA Plug and Play system, called Auto-E-Connect, installs the MSP 200 fully automatically in ECO controllers.
  • The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered as a German and European patent by ESERA GmbH.
  • The installation is done in a few minutes by the dual push in connector system.
  • Due to a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.
  • The housing is protected against vandalism and insects.
  • Processing of the sensor values, thus no complex formulas necessary
  • The Multisensor Pro 200 for temperature and humidity makes it easy to monitor the indoor climate in data centers.
  • The Multisensor Pro 200 has an attractive white sensor housing for mounting on control cabinet doors or walls.

1-Wire Interface:
  • Advanced 1-Wire bus functions with Plug and Play feature, Auto-E-Connect system
  • DS2438 instruction set with Plug and Play support (Auto-E-Connect Functions)
  • Parasitic operation is not supported (2-wire operation without 5V power supply)
1-Wire Plug and Play System, Auto-E-Connect Functions:
  • Automatic Positioning: Advanced Plug And Play system for fully automatic positioning of the sensor / actuator in the ECO Controller
  • Automatic library mapping: The appropriate library is mapped fully automatically for the sensor
  • Classes Assignment: Output OWD sensor class via ECO controller
  • Electronic type plate: output of year of manufacture, software version, software revision, hardware version, OWD position, sensor finder function
  • Pre Configuration: Programming of the desired OWD for the next ECO controller, storage of the OWD number inside the device
  • Sensorfinder Function: LED display for sensor identification. Let the status LED on the sensor / actuator flash for identification.
Colour: white
Connection type: Push In connector / connection
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND), Functional Earth (FE))
Design / Manufacturer: ESERA
Dimensions: 120 x 80 x 35 mm (LxWxH)
Enclosure: ABS plastic, softline white
Execution: 5 pin connector
Function:
  • Environmental sensors
  • Multisensor, temperature, humidity
  • Sensoric
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP20
  • Protection class III with functional grounding
Internal sensors:
  • Dew point calculation, measuring range -40 to + 85°C
  • Humidity, relative, measuring range 0-100%, accuracy 3%
  • Temperature measuring range -40 to + 85°C, accuracy +/- 0.3°C
Measurement values:
  • Air humidity, relative humidity, rel. %
  • Temperature, °C
Mounting:
  • Housing
  • Wall mounting
  • wall mount
Note: Compatibility: Unfortunately the Loxone 1-Wire Extension does not support the functionality of this state of the art sensor. Here we recommend the use of an ECO Controller as interface.
Number of inputs / outputs:
  • 1 - channel input
  • 1 - channel output
Plug and Play support , Auto-E-Connect Support: Yes
Power Consumption: 0.1W, 20mA at 5V
Power supply, Supply Voltage: System supply, 5VDC (1-Wire main voltage)
Protection circuit:
  • Enhanced ESD protection with ±4kV according to IEC 61000-4
  • Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use
  • Overvoltage protection for the voltage supply / power supply
  • Reverse polarity protection for voltage supply / power supply
  • Signal line overvoltage protection (1-Wire Protector) provides protection against high voltage faults up to 28VDC
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -25°C to +70°C, Extended temperature range 1, (E1)
Temperature range, storage: -25°C bis +70°C, Extended temperature range 1, (E1)
Version: Professional Version / Professional Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials
1-Wire distributor LIN 6 with grounding system
1-Wire distributor LIN 6 for cabling of 1-Wire sensors in linear topology with EMC system or shielding.6 inputs / outputs on push-in connectors plus ground connection / functional grounding.Distribution module for easy cabling in linear bus topology of 1-Wire sensors in industrial and data center environment. Designed for cabling CAT5, CAT6 cables or system cables with 5 Aden plus shield. This allows a fast and cost sensitive cabling. Due to the use of Push In clamps you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can quickly and easily connect several 1-Wire distributors 6 LIN with each other linearly via system cable.The distributor complements the existing 1-Wire cabling system based on ESERA system cables.*Push In connectors are screwless clamp connections.

From €35.01*

Product number: 11164

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 Linear cabling with Push In terminals
1-wire outputs on push-in terminals* plus one RJ45 modular jack Distribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 4 to other 1-Wire Distributors quickly and easily using network patch cables. The distributor supplements the existing 1-Wire cabling system based on CAT patch cables. *Push In terminals are screwless terminal connections.

From €29.61*

Product number: 11162

Available, delivery time 1-5 days, depending on the carrier

MSP100 Multisensor Pro, Door Sensor, Data Center, gray
Multisensor Pro 100 for ESERA Data Center Environmental Measurement SystemHumidity and temperature, door sensor,for mounting on control cabinet doors, gray version Highlights: Horizontal ventilation High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low current consumption Processing of sensor values, therefore no complex formulas necessary Shapely door / wall housing gray Function: With the Multisensor Pro 100 for temperature and humidity is a simple monitoring of the indoor climate in the data center. The Multisensor Pro 100 has a shapely white sensor housing for mounting on control cabinet doors

From €161.91*

Product number: 11167-GR

Available, delivery time 1-5 days, depending on the carrier

MSP100 Multisensor Pro, Door Sensor, Data Center, Black
Multisensor Pro 100 for ESERA Data Center environmental measuring system, door sensorHumidity and temperature for mounting on control cabinet doors, black version. Highlights: Horizontal ventilation High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low power consumption Processing of sensor values, therefore no complex formulas necessary Elegant door / wall housing black Function: With the Multisensor Pro 100 for temperature and humidity is a simple monitoring of the indoor climate in data centers. The Multisensor Pro 100 has an attractive white sensor housing for mounting on control cabinet doors.

From €161.91*

Product number: 11167-SW

Available, delivery time 1-5 days, depending on the carrier

EOS 100 Multisensor Pro Outdoor
Multisensor Pro 100 Outdoor for humidity and temperature The EOS 100 is a professional outdoor multisensor of the latest generation for building, system and infrastructure monitoring.The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges. The EOS 100 has internal power and status LED indicators. The sensor finder LED function allows the sensor to be found quickly in large networks. TheESERA Plug and Play system, called Auto-E-Connect, installs the EOS 100 fully automatically in ECO controllers. The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered by ESERA GmbH as a German and European patent.The installation is done in a few minutes by Push In connection terminals.With a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.Highlights: Outdoor multisensor, waterproof High measurement accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) LED indicators for power, status and sensor finder Auto-E-Connect functions Processing of sensor values, therefore no complex formulas necessary Shapely industrial housing Universal outdoor sensor for IoT, industry and building automation

From €98.91*

Product number: 11169

Available, delivery time 1-5 days, depending on the carrier

MSP202 Multisensor Pro 19" mounting, temperature, relative humidity
MSP202 Multisensor Pro for 19" mounting in control cabinetsHumidity and temperatureHighlights: Horizontal ventilation, measurement of air flow into the control cabinet High measuring accuracy for temperature and humidity and dew point Anodized aluminum front panelLED display for status, sensor finder and power Processing and plausibility check of sensor valuesDual RJ45 connection for sensor bus Elegant 19" control cabinet housing in black with black aluminum front panel Function: With the ESO 100 Multisensor Pro 100 Outdoor you can monitor the environmental conditions for temperature and humidity around the house.

From €142.11*

Product number: 11170

Available, delivery time 1-5 days, depending on the carrier

Tip
MSP 105 1-Wire Multisensor Pro Air Humidity and Temperature Sensor
Elegant multisensor for humidity and temperature Pro for 1-Wire bus systemfor professional applications, e.g. public institutions, authorities, machines etc. Highlights Professional Temperature and humidity sensor for private, schools, public buildings and companiesFull support for ESERA Plug and Play system (Auto-E-Connect)Universal surface mountingElegant and high quality sensor housingSimple power supply (5VDC) Function: With the MSP105 1-Wire Multisensor Pro for temperature and humidity, simple monitoring of the room climate is possible. The MSP105 has an attractive sensor housing (surface mounting). With the help of the air humidity sensor, the humidity conditions in the environment are monitored and a warning could be issued via the evaluation software about possible dangers due to mold growth. The MSP105 Multisensor Pro is an important sensor for heating and ventilation systems and is a main component of a single room control. In combination with 1-Wire switching modules, e.g. actuators of radiators or ventilation systems can be controlled and regulated. Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire Controller or the standard version of the 1-Wire Multisensor with article number 11134.

From €59.31*

Product number: 11150

Available, delivery time 1-5 days, depending on the carrier

MSp203 Multisensor Pro Smoke, temperature, rel. humidity
MSP203 Multisensor Pro Smoke, Humidity and Temperature Highlights: Wall mounting, e.g. in a control cabinet High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low power consumption Processing of the sensor values, therefore no complex formulas necessary Function:With the MSP203 Smoke Sensor you can implement an early warning system for developing fires.The MSP 203 Environment - Multisensor quickly detects smoke / fume and measures temperature, relative humidity and dew point with high accuracy. dew point.The sensor MSP 203 is an industrial environmental multisensor of the newest generation and is designed for control cabinet, system and infrastructure monitoring. monitoring.The sensor has LED indicators for power, status and sensor function.The Sensor Finder LED function allows the sensor to be found quickly in large networks. large networks. Per ESERA Plug and Play System, called Auto-E-Connect, the the MSP 203 is installed fully automatically in ECO controllers.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire Bus standard, has been registered by ESERA GmbH as German and European patent pending.The installation is done in a few minutes by the dual RJ45 connector system for patch cables. Due to a sophisticated EMC and grounding concept the environmental multisensor for industrial environments is well prepared for a reliable reliable operation. Horizontal air flow measurement direction, detection of air flow into or out of the control cabinet Intended for mounting on surfaces, e.g. in the control cabinet

From €188.91*

Product number: 11171

Available, delivery time 1-5 days, depending on the carrier