1-Wire distributor LIN 6 with grounding system

Quantity Unit price
1 to 49
€38.90*
50 to 99
€36.96*
From 100
€35.01*

Available, delivery time 1-5 days, depending on the carrier

Product number: 11164
EAN: 0782321213139
Manufacturer product ID: 11164
Product information "1-Wire distributor LIN 6 with grounding system"

1-Wire distributor LIN 6 for cabling of 1-Wire sensors in linear topology with EMC system or shielding.

6 inputs / outputs on push-in connectors plus ground connection / functional grounding.

Distribution module for easy cabling in linear bus topology of 1-Wire sensors in industrial and data center environment.
Designed for cabling CAT5, CAT6 cables or system cables with 5 Aden plus shield.

This allows a fast and cost sensitive cabling. Due to the use of Push In clamps you do not need a screwdriver for mounting. Also the times of loosening screws are over.

You can quickly and easily connect several 1-Wire distributors 6 LIN with each other linearly via system cable.

The distributor complements the existing 1-Wire cabling system based on ESERA system cables.

*Push In connectors are screwless clamp connections.

1-Wire Interface:
  • Parasitic operation is supported (2-wire operation without 5V power supply)
  • Standard 1-Wire bus functions
Colour:
  • black
  • green
Connection type: Push In connector / connection
Data interface: Industrial 1-Wire Bus (5V, 1-Wire Data and Ground (GND), Functional Earth (FE))
Design / Manufacturer: ESERA
Dimensions: 120 x 80 x 35 mm (LxWxH)
Enclosure:
  • ABS plastic with high percentage of recycled plastic, green (RAL 6020)
  • Open circuit board with ABS plastic base. Plastic with high percentage of recycled plastic, green (RAL 6020).
Function:
  • Accessories for sensors (outdoor)
  • Sensor Accessories (General)
Humidity Operation / Storage: 10% to 92% (non-condensing)
Ingress Protection (IP = protection class according to DIN EN 60529), protection class (DIN EN 61140 (VDE 0140-1):
  • IP00
  • Protection class III with functional grounding
Internal sensors: no sensor
Mounting: DIN rail, Top-hat rail or also called mounting rail. According to DIN EN 60715:2018-07, TH 35, formerly TS 35, a mounting rail with top hat profile is
Number of inputs / outputs: 6 - channel input
Plug and Play support , Auto-E-Connect Support: Yes
Power supply, Supply Voltage:
  • System supply, 5VDC (1-Wire main voltage)
  • Voltage supply 2.8VDC to 5.5VDC
Protection circuit:
  • ESD Schutz
  • Internal backup capacitor / buffer / block capacitor between 5V and GND for stable operation of 1-Wire sensors, highly recommended for industrial use
  • Overvoltage protection for the voltage supply / power supply
  • Reverse polarity protection for voltage supply / power supply
  • Signal line overvoltage protection against high voltage faults
Scope of delivery: Device and Quick Guide, the User Guide (Manual) can be found in the download area as a PDF download.
Temperature range, operation: -25°C to +70°C, Extended temperature range 1, (E1)
Temperature range, storage: -25°C bis +70°C, Extended temperature range 1, (E1)
Version: Professional Version / Professional Serie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Device Documentation Operating instructions, connection diagram, conformity, ...
Info Material Product catalogue, Brochures
Technical Downloads Software & co.
Worth knowing Wikis, entries, tutorials

Accessory Items

1-Wire distributor 2 RJ12 passive
1-Wire distributor with 6 outputs RJ12 modular connectors Distribution module for 1-Wire temperature cable sensors with RJ12 connector. The distributor complements the existing 1-Wire temperature sensor system based on modular connector RJ12, enabling fast and cost-sensitive cabling. Connection 1-Wire Bus Input push-in terminal* and RJ45 socket (connected in parallel) Assignment bus connection 5V, 12, Data and GND (connection RJ45 and push-in terminal) Connection temperature sensors 6 x RJ12 sockets with 1-Wire standard assignment (sockets are connected in parallel) Output: 5V, Data and ground (GND) Operating voltage 3 - 5.5VDC Operating current max. 500mA Assembly Designed for top hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions *Push In terminals are screwless terminal connections.

From €27.81*

Product number: 11141

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 1 RJ45 passive
Passive 1-Wire distributor with 6 outputs on RJ45 modular connectors Distributor module for sensors and actuators with RJ45 socket system The distributor supplements the existing 1-wire cabling system based on network cables. This enables fast and cost-sensitive cabling. Connections 6 x RJ45 sockets with 1-Wire standard assignment 12V, 5V, Data and GND (sockets connected in parallel) Pressure connection terminal for connection to 1-wire hub or 1-wire bus coupler/1-wire controller Assembly top-hat rail Miscellaneous Internal filtering of the power supply Scope of delivery Distributor and operating instructions

From €28.71*

Product number: 11140

Available, delivery time 1-5 days, depending on the carrier

1-Wire distributor 4 star wiring with Push In terminals
1-Wire distributor for cabling of 1-Wire sensors in star or tree topology 6 outputs on push-in terminals* plus one RJ45 modular jackDistribution module for easy cabling in linear bus topology of 1-Wire sensors and actuators. Designed for CAT5, CAT6 cabling, telephone cables (2 x 2x 0.8qmm) or EIB cables. This allows a fast and cost sensitive cabling. By using Push In terminals you do not need a screwdriver for mounting. Also the times of loosening screws are over. You can connect several 1-Wire Distributors 3 to other 1-Wire Distributors quickly and easily using network patch cables.The distributor complements the existing 1-Wire cabling system based on CAT patch cables.*Push In terminals are screwless terminal connections.

From €32.31*

Product number: 11142

Available, delivery time 1-5 days, depending on the carrier

Related products

EOS 100 Multisensor Pro Outdoor
Multisensor Pro 100 Outdoor for humidity and temperature The EOS 100 is a professional outdoor multisensor of the latest generation for building, system and infrastructure monitoring.The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges. The EOS 100 has internal power and status LED indicators. The sensor finder LED function allows the sensor to be found quickly in large networks. TheESERA Plug and Play system, called Auto-E-Connect, installs the EOS 100 fully automatically in ECO controllers. The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered by ESERA GmbH as a German and European patent.The installation is done in a few minutes by Push In connection terminals.With a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.Highlights: Outdoor multisensor, waterproof High measurement accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) LED indicators for power, status and sensor finder Auto-E-Connect functions Processing of sensor values, therefore no complex formulas necessary Shapely industrial housing Universal outdoor sensor for IoT, industry and building automation

From €98.91*

Product number: 11169

Available, delivery time 1-5 days, depending on the carrier

MSP100 Multisensor Pro, Door Sensor, Data Center, Black
Multisensor Pro 100 for ESERA Data Center environmental measuring system, door sensorHumidity and temperature for mounting on control cabinet doors, black version. Highlights: Horizontal ventilation High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low power consumption Processing of sensor values, therefore no complex formulas necessary Elegant door / wall housing black Function: With the Multisensor Pro 100 for temperature and humidity is a simple monitoring of the indoor climate in data centers. The Multisensor Pro 100 has an attractive white sensor housing for mounting on control cabinet doors.

From €161.91*

Product number: 11167-SW

Available, delivery time 1-5 days, depending on the carrier

MSP100 Multisensor Pro, Door Sensor, Data Center, gray
Multisensor Pro 100 for ESERA Data Center Environmental Measurement SystemHumidity and temperature, door sensor,for mounting on control cabinet doors, gray version Highlights: Horizontal ventilation High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-wire sensors) Low current consumption Processing of sensor values, therefore no complex formulas necessary Shapely door / wall housing gray Function: With the Multisensor Pro 100 for temperature and humidity is a simple monitoring of the indoor climate in the data center. The Multisensor Pro 100 has a shapely white sensor housing for mounting on control cabinet doors

From €161.91*

Product number: 11167-GR

Available, delivery time 1-5 days, depending on the carrier

MSP200 Multisensor Pro, Wall mount
MSP 200, System monitoring per Environment - MultisensorMultisensor Pro 200 for ESERA Data Center environmental measuring system, humidity and temperatureDescription The MSP 200 is an industrial environmental multisensor of the latest generation for building, system and infrastructure monitoring. The environmental multisensor measures temperature and relative humidity with high accuracy and wide measuring ranges. The MSP 200 has power and status LED indicators.The sensor finder LED function allows the sensor to be found quickly in large networks.The ESERA Plug and Play system, called Auto-E-Connect, installs the MSP 200 fully automatically in ECO controllers.The ESERA Auto-E-Connect system, which is an extension of the 1-Wire bus standard, has been registered as a German and European patent by ESERA GmbH.The installation is done in a few minutes by the dual push in connector system.Due to a sophisticated EMC and grounding concept, the environmental multisensor is well prepared for reliable operation in industrial environments.The housing is protected against vandalism and insects.Processing of the sensor values, thus no complex formulas necessaryThe Multisensor Pro 200 for temperature and humidity makes it easy to monitor the indoor climate in data centers.The Multisensor Pro 200 has an attractive white sensor housing for mounting on control cabinet doors or walls.

From €97.11*

Product number: 11168

Available, delivery time 1-5 days, depending on the carrier

MS105 1-Wire Multisensor temperature, humidity living room flush-mounted for Berker, Jung, Merten Kopie
MS105 1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.

Variants from €59.31*
From €48.52*

Product number: 11132

Available, delivery time 1-5 days, depending on the carrier

1-Wire Multisensor Pro temperature, humidity living room flush-mounted for Berker, Jung, Merten
1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch range. The 1-Wire flush-mounted living space sensor is based on a carrier from Berker. The Multisensor 1-Wire flush-mounted living space sensor is equipped with a 1-Wire interface of type DS2438 and measures temperature, humidity and operating voltage with very high accuracy.   1-Wire interface DS2438 command set for temperature, humidity and operating voltage Temperature sensor Highly accurate temperature sensor Temperature range -40°C to +125°C Accuracy +/- 0.3° in the range of 0°C - 85°C Resolution 12 bit, 0.0625°C/bit Air humidity sensor highly accurate humidity sensor Measuring range humidity 0% to 100% rel. humidity Accuracy +/- 3% in the range of 5 - 95% relative humidity (non-condensing) Repeatability 0,5% Resolution 10 bit, approx. 0.32% humidity 1-Wire connection 3 - conductor connection (data, ground and 5V, parasitic operation not supported) Operating voltage 5 VDC +/-20 Power consumption approx. 2 mA Connection: Pressure connection terminal Dimensions (outside) 71 x 71 x 37 mm (LxWxH) Scope of delivery Sensor module, central screen (aperture) + operating instructions Note: Unfortunately the Loxone 1-Wire Extension does not support the functionality of the module. Here we recommend the use of the 1-Wire controller or the standard version of the 1-Wire Multisensor with the article number 11132, which we produce on request.

Variants from €59.31*
From €69.21*

Product number: 11160-3

Available, delivery time 1-5 days, depending on the carrier